33.060.99 - Other equipment for radiocommunications

REN/ERM-TGMAR-535

The present document specifies technical characteristics and methods of measurements for Radio Frequency
Identification (RFID) devices used in the frequency ranges 865 MHz to 868 MHz and 915 MHz to 921 MHz.
Power limits up to a maximum of 2 W e.r.p. are specified for this equipment in the frequency band 865 MHz to
868 MHz and up to a maximum of 4 W e.r.p. in the frequency band 915 MHz to 921 MHz.
NOTE 1: The term frequency band is typically used for reference to dedicated bands as described ...view more

The present document covers the technical requirements for radio transmitters and receivers used in stations in the
Private Mobile Radio (PMR) service.
It applies to use in the land mobile service, operating on radio frequencies between 30 MHz and 1 GHz, with channel
separations of 12,5 kHz, 20 kHz and 25 kHz, intended for speech and/or data.
It applies to equipment for continuous and/or discontinuous transmission of data and/or digital speech.
The equipment comprises a transmitter and asso...view more

The present document applies to the following radio equipment type:
• User Equipment for IMT-2000 CDMA Direct Spread (UTRA FDD).
The present document covers requirements for UTRA FDD User Equipment from 3GPP™ Releases 99, 4, 5, 6, 7, 8, 9,
10 and 11 defined in ETSI TS 125 101 [4]. This includes the requirements for UE operating bands from 3GPP™
Release 12 defined in ETSI TS 125 101 [4]. In addition, the present document covers requirements for UTRA FDD
User Equipment in the operating bands ...view more

The present document specifies the requirements for Ground- and Wall- Probing Radar imaging systems applications.
Ground Probing Radars (GPR) and Wall Probing Radars (WPR) are used in survey and detection applications.These do
not include radars operated from aircraft or spacecraft.
The present document applies to:
1) Ground Probing Radars (GPR) operating in the frequency range 30 MHz to 12,4 GHz radiating directly
downwards into the ground.
2) Wall Probing Radars (WPR) operating in the fr...view more

The present document applies to the following radio equipment types:
• Repeaters for Evolved Universal Terrestrial Radio Access (E-UTRA) (FDD).
This radio equipment type is capable of operating in all or any part of the operating bands given in table 1-1.
Table 1-1: E-UTRA Repeater operating bands
The present document covers requirements for E-UTRA Repeaters for 3GPP Release 15. NOTE: The relationship between the present document and essential requirements of article 3.2 of Directive 2014/53...view more

The present document applies to the following radio equipment type:
• User Equipment for Evolved Universal Terrestrial Radio Access (E-UTRA).
This radio equipment type is capable of operating in all or any part of the frequency bands given in tables from 1-1 through 1-5.
Table 1-1: E-UTRA UE operating bands
NOTE 1: The relationship between the present document and essential requirements of article 3.2 of Directive 2014/53/EU [i.2] is given in annex A.
Table 1-1A: Sub-bands for band 46
Tabl...view more

The present document applies to user equipment, repeaters and base stations for IMT, falling within the scope of one of the other parts of ETSI EN 301 908 [i.8], except for IMT-2000 FDMA/TDMA (DECT). The present document also covers the corresponding ancillary equipment.
NOTE 1: ETSI EN 301 908-10 [i.7] contains in particular requirements for radiated spurious emissions and control and monitoring functions applicable to IMT-2000 FDMA/TDMA (DECT) equipment. The present document includes technica...view more

The present document applies to Wideband Data Transmission equipment. The present document also describes spectrum access requirements to facilitate spectrum sharing with other equipment. Wideband Data Transmission equipment covered by the present document is operated in accordance with the ERC Recommendation 70-03 [i.6], annex 3 or Commission Decision 2006/771/EC [i.7] (and its amendments). Equipment using Ultra Wide Band (UWB) technology is not covered by the present document.
NOTE: The relat...view more

The present document applies to the following equipment types:
• Multi-Standard Radio capable Base stations (E-UTRA, UTRA, GSM/EDGE, NB-IoT).
These radio equipment types are capable of operating in all or any part of the frequency bands given in table 1-1.      NOTE 1: For BS capable of multi-band operation, the supported operating bands may belong to different Band
Categories.
The present document covers conducted requirements for multi-RAT capable E-UTRA, UTRA and GSM/EDGE MSR
Base Stations f...view more

The present document specifies technical characteristics and methods of measurements for the types of equipment:
1) Base Station for Evolved Universal Terrestrial Radio Access (E-UTRA).
2) Base Station for Evolved Universal Terrestrial Radio Access (E-UTRA) with NB-IoT.
3) Base Station for NB-IoT standalone.
This radio equipment type is capable of operating in all or any part of the operating bands given in table 1-1. Unless
stated otherwise, requirements specified for the TDD duplex mode a...view more

The present document specifies technical characteristics and methods of measurements for the equipment:
• Stations for IMT 2000 CDMA Direct Spread (UTRA FDD).
- This radio equipment type is capable of operating in all or any part of the frequency bands given in
table 1-1.
The present document covers conducted requirements for UTRA FDD Base Stations for 3GPP Releases 99, 4, 5, 6, 7, 8,
9, 10, 11, 12 and 13. Additionally, it includes the requirements for BS operating bands from 3GPP Release 1...view more

The present document specifies technical characteristics and methods of measurements for monostatic X-band radar
sensors intended for the surveillance of airspace traffic with the following characteristics:
• Operating in the frequency range 8 500 MHz to 10 000 MHz utilizing modulated pulses.
• The transceiver-antenna connection is using a hollow metallic rectangular waveguide.
• The antenna is rotating, waveguide-based and passive.
• At the transceiver output an RF-circulator is used.
NOT...view more

The present document specifies technical characteristics and methods of measurements for Transport and Traffic
Telematics (TTT) systems:
• with a Radio Frequency (RF) output connection and specified antenna or with an integral antenna;
• for data transmission only;
• operating in the 5 795 MHz to 5 815 MHz frequency band.
The applicability of the present document covers only the On Board Units (OBU).
The present document complies with the Commission Implementing Decision 2017/1483/EU [i.4]...view more

The present document specifies technical characteristics and methods of measurements for Ultra Low Power Wireless
Medical Capsule Endoscopy application (CCam transmitters and associated DR receivers) operating in the designated
frequency band 430 MHz to 440 MHz, as meant by ETSI TR 103 451 [i.3].
A possible return (downlink) RF transmission channel from DR to CCam for command and control signalling, if and
when implemented, is outside the scope of the present document.
NOTE: The relationshi...view more

The present document covers the link and sub-network access layers of Very High Frequency (VHF) Digital Link. The
present document applies to VDL Mode 2 ground-based stations operating in the VHF band (117,975 MHz to
137,000 MHz) with 25 kHz channel spacing and using Differential Eight Phase Shift Keying (D8PSK).
The present document provides functional specifications for ground-based radio transmitters, receivers, and transceivers
intended to be used for ground-air data communications. The ...view more

The present document together with ETSI EN 301 489-1 [1], covers the assessment of all radio transceivers associated
with Ultra Low Power Active Medical Implants (ULP-AMIs), Ultra Low Power Active Medical Devices (ULP-AMDs),
Ultra Low Power Body Worn Devices (ULP-BWDs) and associated Ultra Low Power Active Medical Implant
Peripherals (ULP-AMI-Ps), Ultra Low Power Active Medical Device Peripherals (ULP-AMD-Ps) in respect of
ElectroMagnetic Compatibility (EMC).
The radio link may be part of l...view more

The present document together with ETSI EN 301 489-1 [1], covers the assessment of all radio transceivers associated
with Ultra Low Power Active Medical Implants (ULP-AMIs) and associated Peripheral ULP-AMI-Ps) in respect of
ElectroMagnetic Compatibility (EMC).
The present document covers the EMC requirements for the radio functions of ULP-AMI and ULP-AMI-P devices.
Technical specifications related to the antenna port and emissions from the enclosure port of the ULP-AMI and
ULP-AMI-P device...view more

The present document together with ETSI EN 301 489-1 [1], covers the assessment of all radio transceivers associated
with Low Power Active Medical Implants (LP-AMIs) and associated Peripheral devices (LP-AMI-P) in respect of
ElectroMagnetic Compatibility (EMC).
The present document covers the EMC requirements for the radio functions of LP-AMI and associated Peripheral
devices (LP-AMI-P).
Technical specifications related to the antenna port and emissions from the enclosure port of the radio ...view more

The present document specifies technical characteristics and methods of measurements for low power maritime
personal locating devices employing AIS.
The present document does not cover requirements for the integrated GNSS receiver providing locating function.
The present document incorporates the relevant provisions of the International Telecommunication Union (ITU) radio
regulations [i.4] included in Recommendation ITU-R M.1371-5 [1].
For this application, both the radiated power and the l...view more