iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty!
SIST

SIST EN 300 019-2-6 V2.1.2:2006

(Main)
Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-6: Specification of environmental tests; Ship environments

The present document specifies test severities and methods for the verification of the required resistibility of equipment according to the relevant environmental class. The tests defined in the present document apply to the use of telecommunication equipment installed permanently or temporarily in ships and cover the environments and the vessels stated in ETS 300 019-1-6 [1].

Okoljski inženiring (EE) – Okoljski pogoji in preskusi vplivov okolja na telekomunikacijsko opremo – 2-6. del: Specifikacija preskusov vplivov okolja – Ladijsko okolje

General Information

Status
Published
Publication Date
31-Jan-2006
ICS
19.040 - Environmental testing
33.050.01 - Telecommunication terminal equipment in general
Technical Committee
SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Feb-2006
Due Date
01-Feb-2006
Completion Date
01-Feb-2006
Ref Project
ETSI EN 300 019-2-6 V2.1.2 (2001-09) - Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-6: Specification of environmental tests; Ship environments

Buy Standard

First pageSecond page
PreviousNext
Standard
SIST EN 300 019-2-6 V2.1.2:2006
English language
17 pages
sale - 10%
Preview
sale - 10%
Preview

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 300 019-2-6 V2.1.2:2006
01-februar-2006
Okoljski inženiring (EE) – Okoljski pogoji in preskusi vplivov okolja na
telekomunikacijsko opremo – 2-6. del: Specifikacija preskusov vplivov okolja –
Ladijsko okolje

Environmental Engineering (EE); Environmental conditions and environmental tests for

telecommunications equipment; Part 2-6: Specification of environmental tests; Ship

environments
Ta slovenski standard je istoveten z: EN 300 019-2-6 Version 2.1.2
ICS:
19.040 Preskušanje v zvezi z Environmental testing
okoljem
33.050.01 Telekomunikacijska Telecommunication terminal
terminalska oprema na equipment in general
splošno
SIST EN 300 019-2-6 V2.1.2:2006 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 300 019-2-6 V2.1.2:2006
---------------------- Page: 2 ----------------------
SIST EN 300 019-2-6 V2.1.2:2006
ETSI EN 300 019-2-6 V2.1.2 (2001-09)
European Standard (Telecommunications series)
Environmental Engineering (EE);
Environmental conditions and environmental tests for
telecommunications equipment;
Part 2-6: Specification of environmental tests;
Ship environments
---------------------- Page: 3 ----------------------
SIST EN 300 019-2-6 V2.1.2:2006
2 ETSI EN 300 019-2-6 V2.1.2 (2001-09)
Reference
REN/EE-01027-2-6
Keywords
environment, maritime, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org

The present document may be made available in more than one electronic version or in print. In any case of existing or

perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).

In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive

within ETSI Secretariat.

Users of the present document should be aware that the document may be subject to revision or change of status.

Information on the current status of this and other ETSI documents is available at

http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, send your comment to:
editor@etsi.fr
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2001.
All rights reserved.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 300 019-2-6 V2.1.2:2006
3 ETSI EN 300 019-2-6 V2.1.2 (2001-09)
Contents

Intellectual Property Rights................................................................................................................................4

Foreword.............................................................................................................................................................4

1 Scope........................................................................................................................................................5

2 References................................................................................................................................................5

3 Environmental test specifications.............................................................................................................5

3.1 Specification T 6.1: Totally weatherprotected locations ....................................................................................6

3.2 Specification T 6.2: Partly weatherprotected locations ......................................................................................7

3.3 Specification T 6.3: Non-weatherprotected locations.........................................................................................9

4 Notes to tables ........................................................................................................................................13

4.1 General Note....................................................................................................................................................13

4.2 Notes to tables 1 to 5 ........................................................................................................................................13

Annex A (informative): Bibliography...................................................................................................16

History ..............................................................................................................................................................17

ETSI
---------------------- Page: 5 ----------------------
SIST EN 300 019-2-6 V2.1.2:2006
4 ETSI EN 300 019-2-6 V2.1.2 (2001-09)
Intellectual Property Rights

IPRs essential or potentially essential to the present document may have been declared to ETSI. The information

pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found

in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in

respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web

server (http://www.etsi.org/legal/home.htm).

Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee

can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web

server) which are, or may be, or may become, essential to the present document.
Foreword

This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Environmental

Engineering (EE).

The present document is part 2, sub-part 6 of a multi-part deliverable covering environmental conditions and

environmental tests for telecommunications equipment, as identified below:
Part 1: "Classification of environmental conditions";
Part 2: "Specification of environmental tests";
Sub-part 0: "Introduction";
Sub-part 1: "Storage";
Sub-part 2: "Transportation";
Sub-part 3: "Stationary use at weatherprotected locations";
Sub-part 4: "Stationary use at non-weatherprotected locations";
Sub-part 5: "Ground vehicle installations";
Sub-part 6: "Ship environments";
Sub-part 7: "Portable and non-stationary use";
Sub-part 8: "Stationary use at underground locations".

Part 1 specifies different standardized environmental classes covering climatic and biological conditions, chemically

and mechanically active substances and mechanical conditions during storage, transportation and in use.

Part 2 specifies the recommended test severities and test methods for the different environmental classes.

Part 2-0 forms a general overview of part 2. The present document deals with ship environments.

National transposition dates
Date of adoption of this EN: 14 September 2001
Date of latest announcement of this EN (doa): 31 December 2001
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 30 June 2002
Date of withdrawal of any conflicting National Standard (dow): 30 June 2002
ETSI
---------------------- Page: 6 ----------------------
SIST EN 300 019-2-6 V2.1.2:2006
5 ETSI EN 300 019-2-6 V2.1.2 (2001-09)
1 Scope

The present document specifies test severities and methods for the verification of the required resistibility of equipment

according to the relevant environmental class.

The tests defined in the present document apply to the use of telecommunication equipment installed permanently or

temporarily in ships and cover the environments and the vessels stated in ETS 300 019-1-6 [1].

2 References

The following documents contain provisions which, through reference in this text, constitute provisions of the present

document.

• References are either specific (identified by date of publication and/or edition number or version number) or

non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.

[1] ETSI ETS 300 019-1-6: "Equipment Engineering (EE); Environmental conditions and

environmental tests for telecommunications equipment; Part 1-6: Classification of environmental

conditions; Ship environments".
[2] IEC 60068-2: "Environmental testing - Part 2: Tests".

[3] ETSI ETS 300 019-2-0: "Equipment Engineering (EE); Environmental conditions and

environmental tests for telecommunications equipment; Part 2-0: Specification of environmental

tests; Introduction".
3 Environmental test specifications

The detailed descriptions of the environmental conditions are given in clauses 4 and 5 of ETS 300 019-1-6 [1].

ETS 300 019-2-0 [3] forms a general overview of part 2 of the present multipart standard.

The equipment under test is assumed to be in its operational state throughout the test conditions described in this part

unless otherwise stated. The required performance before, during and after the test needs to be specified in the product

specification. Input and load conditions of the equipment shall be chosen to obtain full utilization of the equipment

under test. The heat dissipation shall be maximized, except for the steady state, low temperature test, where it shall be

minimized.
ETSI
---------------------- Page: 7 ----------------------
SIST EN 300 019-2-6 V2.1.2:2006
6 ETSI EN 300 019-2-6 V2.1.2 (2001-09)
3.1 Specification T 6.1: Totally weatherprotected locations

This specification applies to a totally weatherprotected use in ships excluding Warm Damp and Warm Damp Equable climates, see tables 1 and 4.

Table 1: Test specification T 6.1: Totally weatherprotected locations - climatic tests

Environmental parameter Environmental Environmental test specification T6.1: Ship, totally

Class 6.1 weatherprotected locations

Type Parameter Detail parameter Characteristic Test severity Duration Reference Method Notes

severity
low (°C) +5 +5 16 h IEC 60068-2-1 [2] Ab/Ad: Cold
Air temperature high (°C) +40 +40 16 h IEC 60068-2-2 [2] Bb/Bd: Dry heat 2
change air/water (°C) no
surface high (°C) no
low (%) 10 none 6
relative high; (%) 95 93 96 h Cb: Damp heat 7
IEC 60068-2-56 [2]
slow temperature change (°C) +30 +30 steady state
Humidity high; (%) no
rapid temperature change (°C)
absolute no
high; (g/m )
rapid temperature change (°C)
Air speed (m/s) no
temperature high (°C) +30 none 6
low (°C) no
rain intensity (mm/min) no
Water
volume (m /min)
pressure (kPa)
other sources velocity (m/s) no
wetness no
Radiation solar no
(W/m )
heat no
(W/m )
sulphur 0,1 none 15
SO (mg/m )
0,01 none 15
HS (mg/m )
Chemically chlorine sea salts negligible
active 0,1 none 15
HCI (mg/m )
substances nitrogen 0,1 none 15
NOx (mg/m )
0,3 none 15
NH (mg/m )
hydrogen fluoride 0,003 none 15
HF (mg/m )
ozone 0,01 none 15
O (mg/m )
ETSI
---------------------- Page: 8 ----------------------
SIST EN 300 019-2-6 V2.1.2:2006
7 ETSI EN 300 019-2-6 V2.1.2 (2001-09)

Environmental parameter Environmental Environmental test specification T6.1: Ship, totally

Class 6.1 weatherprotected locations

Type Parameter Detail parameter Characteristic Test severity Duration Reference Method Notes

severity
Mechanically dust sedimentation negligible
active sand in air no
substances soot deposit no
Flora and micro organisms negligible
Fauna rodents, insects negligible
no: This condition does not occur in this class.
none: Verification is required only in special cases.
NOTES: Number of note, see clause 4.2.
3.2 Specification T 6.2: Partly weatherprotected locations

This specification applies to use in ships excluding Cold Climate and extreme weather conditions, see tables 2, 4 and 5.

Table 2: Test specification T 6.2: Partly weatherprotected locations - climatic tests

Environmental parameter Environmental Environmental test specification T6.2: Ship, partly

Class 6.2 weatherprotected locations

Type Parameter Detail parameter Characteristic Test severity Duration Reference Method Notes

severity
low (°C) -25 -25 16 h Ab/Ad: Cold 1
IEC 60068-2-1 [2]
Air temperature high (°C) +70 +70 or +85 16 h Bb/Bd: Dry heat 2
IEC 60068-2-2 [2]
change gradual (°C) -25/+40 -25/+40 5 cycles Nb: Change of 3
IEC 60068-2-14 [2]
(°C/min) 3 3 t = 3 h temperature
4
change air/water (°C) +40/+5 none
surface high (°C) +70 none 5
low (%) 10 none 6
relative high; (%) 95 93 96 h Cb: Damp heat 7
IEC 60068-2-56 [2]
slow temperature change (°C) +45 +40 steady state
Humidity high; (%) 95 none 8
rapid temperature change (°C) -25/+35
absolute 60 9
high; (g/m )
+70/+15
rapid temperature change (°C)
90-100 6 cycles Db: Damp heat
(%) IEC 60068-2-30 [2]
+55 cyclic, variant 2
(°C)
Air speed (m/s) 30 none 6
temperature high (°C) +35 none 6
low (°C) freezing point none 10
rain intensity (mm/min) 6 11
Water 0,01 Rb: Impacting
≥ 5 minutes IEC 60068-2-18 [2]
volume (m /min)
90 water
pressure (kPa)
method 1.2
other sources velocity (m/s) 3 none 12
wetness wet surfaces none 13
ETSI
---------------------- Page: 9 ----------------------
SIST EN 300 019-2-6 V2.1.2:2006
8 ETSI EN 300 019-2-6 V2.1.2 (2001-09)

Environmental parameter Environmental Environmental test specification T6.2: Ship, partly

Class 6.2 weatherprotected locations

Type Parameter Detail parameter Characteristic Test severity Duration Reference Method Notes

severity
Radiation solar 1 120 none 14
(W/m )
heat 1 200 none 14
(W/m )
sulphur 1,0 none 15
SO (mg/m )
0,5 none 15
HS (mg/m )
Chemically salts mist yes none 15
active chlorine 30 none 15
sea salts (kg/m )
substances 0,5 none 15
HCI (mg/m )
nitrogen 1,0 none 15
NO (mg/m )
3,0 none 15
NH (mg/m )
hydrogen fluoride 0,03 none 15
HF (mg/m )
ozone 0,1 none 15
O (mg/m )
Mechanically dust 3,0 none 16
sedimentation (mg/(m h))
active sand in air 0,1 none 16
(mg/m )
substances soot deposit yes none 16
Flora and micro organisms mould, fungus etc. none 17
Fauna rodents, insects rodents, etc. none 17
no: This condition does not occur in this class.
none: Verification is required only in special cases.
NOTES: Number of note, see clause 4.2.
ETSI
--------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 300 019-1-0 V2.1.2:2006(Main)
Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 1-0: Classification of environmental conditions; Introduction
ETSI EN 300 019-1-0 V2.1.2 (2003-09)

The purpose of the present document is to select class(es) of environmental conditions and their severities to which equipment may be exposed. Only severe conditions, which may be harmful to the equipment, are included. The severities specified are those which will have a low probability of being exceeded; generally less than 1 %. The purpose of the present document is to form a general overview of Part 1. TR 100 035 [1] should be used in conjunction with all parts of EN 300 019 series. It gives...view more

    • sale - 10%
    • Standard
      10 pages
      English language
SIST
SIST EN 300 019-1-5 V2.1.4:2006(Main)
Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 1-5: Classification of environmental conditions; Ground vehicle installations
ETSI EN 300 019-1-5 V2.1.4 (2003-04)

The present document defines the classes of environmental conditions and their severities to which equipment may be exposed in ground vehicles. Only severe conditions, which may be harmful to the equipment, are included. The severities specified are those which will have a low probability of being exceeded; generally less than 1 %. The present document applies to equipment when in use and permanently or temporarily installed in ground vehicles.

    • sale - 10%
    • Standard
      12 pages
      English language
SIST
SIST EN 300 019-2-3 V2.2.1:2006(Main)
Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-3: Specification of environmental tests; Stationary use at weatherprotected locations
ETSI EN 300 019-2-3 V2.2.1 (2003-03)

The present document specifies test severities and methods for the verification of the required resistibility of equipment according to the relevant environmental class. The tests in Part 2-3 of this multi-part EN apply to stationary use of equipment at weatherprotected locations covering the environmental conditions stated in EN 300 019-1-3 [1].

    • sale - 10%
    • Standard
      31 pages
      English language
SIST
SIST EN 300 019-2-5 V2.1.2:2006(Main)
Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-5: Specification of environmental tests; Ground vehicle installations
ETSI EN 300 019-2-5 V2.1.2 (2001-09)

The present document specifies test methods and severities for the verification of the required resistibility of telecommunication equipment according to the relevant environmental class. The tests in the present document apply to the use of equipment installed permanently or temporarily in ground vehicles and cover the vehicles and the environmental conditions stated in ETS 300 019-1-5 [1]. The tests cover installations in vehicles powered by electric motors and combustion engines. Applications...view more

    • sale - 10%
    • Standard
      16 pages
      English language
SIST
SIST EN 300 019-1-2 V2.1.2:2006(Main)
Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 1-2: Classification of environmental conditions; Transportation
ETSI EN 300 019-1-2 V2.1.2 (2002-04)

The present document defines classes of environmental conditions and their severities to which telecommunication equipment may be exposed. The severities specified are those which will have a low probability of being exceeded; generally less than 1 %. The present document applies to equipment being transported from one place to another after being made ready for dispatch from the manufacturer's works. The most commonly used methods of transportation have been taken into account, i.e. ground, wat...view more

    • sale - 10%
    • Standard
      12 pages
      English language
SIST
SIST EN 300 019-2-7 V3.0.1:2006(Main)
Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-7: Specification of environmental tests; Portable and non-stationary use
ETSI EN 300 019-2-7 V3.0.1 (2003-04)

The present document specifies test methods and severities for the verification of the required resistibility of telecommunication equipment according to the relevant environmental class. The tests defined in the present document apply to portable and non-stationary use of equipment, covering the environments stated in EN 300 019-1-7 [1].

    • sale - 10%
    • Standard
      17 pages
      English language
SIST
SIST EN 300 019-1-7 V2.1.2:2006(Main)
Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 1-7: Classification of environmental conditions; Portable and non-stationary use
ETSI EN 300 019-1-7 V2.1.2 (2002-04)

The present document defines classes of environmental conditions and their severities to which telecommunication equipment may be exposed. The severities specified are those which will have a low probability of being exceeded; generally less than 1 %. The present document applies to equipment during portable and non-stationary use including periods of transfer, down time, maintenance and repair at locations defined in clauses 3 to 5.

    • sale - 10%
    • Standard
      15 pages
      English language
SIST
SIST EN 300 019-1-3 V2.1.1:2006(Main)
Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 1-3: Classification of environmental conditions; Stationary use at weatherprotected locations
ETSI EN 300 019-1-3 V2.1.1 (2002-11)

The present document defines classes of environmental conditions and their severities to which telecommunication equipment may be exposed. The severities specified are those which will have a low probability of being exceeded; generally less than 1 %. The present document applies to equipment mounted for stationary use including periods of erection work, down time, maintenance and repair at weatherprotected locations defined in clause 5.

    • sale - 10%
    • Standard
      20 pages
      English language
SIST
SIST EN 300 119-1 V2.1.1:2006(Main)
Environmental Engineering (EE); European telecommunication standard for equipment practice; Part 1: Introduction and terminology
ETSI EN 300 119-1 V2.1.1 (2004-09)

The present document sets out the major engineering requirements for telecommunications equipment forming part of a public telecommunications network installed either on public telecommunications operators' sites or in premises of operators' customers. It is expected that the areas of transmission equipment and switching equipment will increasingly merge into one. As a result, the present document should be applied to all forms of telecommunications equipment. The operating authorities should be...view more

    • sale - 10%
    • Standard
      8 pages
      English language
SIST
SIST EN 300 019-1-5 V2.1.2:2006(Main)
Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 1-5: Classification of environmental conditions; Ground vehicle installations
ETSI EN 300 019-1-5 V2.1.2 (2002-04)

The present document defines the classes of environmental conditions and their severities to which equipment may be exposed in ground vehicles. Only severe conditions, which may be harmful to the equipment, are included. The severities specified are those which will have a low probability of being exceeded; generally less than 1 %. The present document applies to equipment when in use and permanently or temporarily installed in ground vehicles.

    • sale - 10%
    • Standard
      14 pages
      English language