iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty!
SIST

SIST EN 300 019-2-7 V3.0.1:2006

(Main)
Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-7: Specification of environmental tests; Portable and non-stationary use

The present document specifies test methods and severities for the verification of the required resistibility of telecommunication equipment according to the relevant environmental class. The tests defined in the present document apply to portable and non-stationary use of equipment, covering the environments stated in EN 300 019-1-7 [1].

Okoljski inženiring (EE) – Okoljski pogoji in preskusi vplivov okolja na telekomunikacijsko opremo – 2-7. del: Specifikacija preskusov vplivov okolja – Prenosna in nefiksna uporaba

General Information

Status
Published
Publication Date
31-Jan-2006
ICS
19.040 - Environmental testing
33.050.01 - Telecommunication terminal equipment in general
Technical Committee
SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Feb-2006
Due Date
01-Feb-2006
Completion Date
01-Feb-2006
Ref Project
ETSI EN 300 019-2-7 V3.0.1 (2003-04) - Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-7: Specification of environmental tests; Portable and non-stationary use

Buy Standard

First pageSecond page
PreviousNext
Standard
SIST EN 300 019-2-7 V3.0.1:2006
English language
17 pages
sale - 10%
Preview
sale - 10%
Preview

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 300 019-2-7 V3.0.1:2006
01-februar-2006
Okoljski inženiring (EE) – Okoljski pogoji in preskusi vplivov okolja na
telekomunikacijsko opremo – 2-7. del: Specifikacija preskusov vplivov okolja –
Prenosna in nefiksna uporaba

Environmental Engineering (EE); Environmental conditions and environmental tests for

telecommunications equipment; Part 2-7: Specification of environmental tests; Portable

and non-stationary use
Ta slovenski standard je istoveten z: EN 300 019-2-7 Version 3.0.1
ICS:
19.040 Preskušanje v zvezi z Environmental testing
okoljem
33.050.01 Telekomunikacijska Telecommunication terminal
terminalska oprema na equipment in general
splošno
SIST EN 300 019-2-7 V3.0.1:2006 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 300 019-2-7 V3.0.1:2006
---------------------- Page: 2 ----------------------
SIST EN 300 019-2-7 V3.0.1:2006
ETSI EN 300 019-2-7 V3.0.1 (2003-04)
European Standard (Telecommunications series)
Environmental Engineering (EE);
Environmental conditions and environmental tests
for telecommunications equipment;
Part 2-7: Specification of environmental tests;
Portable and non-stationary use
---------------------- Page: 3 ----------------------
SIST EN 300 019-2-7 V3.0.1:2006
2 ETSI EN 300 019-2-7 V3.0.1 (2003-04)
Reference
REN/EE-01034-2-7[2]
Keywords
environment, mobile, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org

The present document may be made available in more than one electronic version or in print. In any case of existing or

perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).

In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive

within ETSI Secretariat.

Users of the present document should be aware that the document may be subject to revision or change of status.

Information on the current status of this and other ETSI documents is available at

http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, send your comment to:
editor@etsi.org
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2003.
All rights reserved.
TM TM TM

DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.

TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.

3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.

ETSI
---------------------- Page: 4 ----------------------
SIST EN 300 019-2-7 V3.0.1:2006
3 ETSI EN 300 019-2-7 V3.0.1 (2003-04)
Contents

Intellectual Property Rights................................................................................................................................4

Foreword.............................................................................................................................................................4

1 Scope........................................................................................................................................................5

2 References................................................................................................................................................5

3 Environmental test specifications.............................................................................................................5

3.1 Specification T 7.1: Temperature-controlled locations ......................................................................................6

3.2 Specification T 7.2: Partly temperature-controlled locations .............................................................................7

3.3 Specification T 7.3: Partly weatherprotected and non-weatherprotected locations............................................9

3.4 Specification T 7.3E: Partly weatherprotected and non-weatherprotected locations - extended......................10

4 Notes to tables ........................................................................................................................................14

4.1 General note.....................................................................................................................................................14

4.2 Notes to tables 1 to 6 ........................................................................................................................................14

Annex A (informative): Bibliography...................................................................................................16

History ..............................................................................................................................................................17

ETSI
---------------------- Page: 5 ----------------------
SIST EN 300 019-2-7 V3.0.1:2006
4 ETSI EN 300 019-2-7 V3.0.1 (2003-04)
Intellectual Property Rights

IPRs essential or potentially essential to the present document may have been declared to ETSI. The information

pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found

in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in

respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web

server (http://webapp.etsi.org/IPR/home.asp).

All published ETSI deliverables shall include information which directs the reader to the above source of information.

Foreword

This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Environmental

Engineering (EE).

The present document is part 2, sub-part 7 of a multi-part deliverable covering environmental conditions and

environmental tests for telecommunications equipment, as identified below:
Part 1: "Classification of environmental conditions";
Part 2: "Specification of environmental tests";
Sub-part 0: "Introduction";
Sub-part 1: "Storage";
Sub-part 2: "Transportation";
Sub-part 3: "Stationary use at weatherprotected locations";
Sub-part 4: "Stationary use at non-weatherprotected locations";
Sub-part 5: "Ground vehicle installations";
Sub-part 6: "Ship environments";
Sub-part 7: "Portable and non-stationary use";
Sub-part 8: "Stationary use at underground locations".

Part 1 specifies different standardized environmental classes covering climatic and biological conditions, chemically

and mechanically active substances and mechanical conditions during storage, transportation and in use.

Part 2 specifies the recommended test severities and test methods for the different environmental classes.

Part 2-0 forms a general overview of part 2. The present document deals with portable and non-stationary use.

National transposition dates
Date of latest announcement of this EN (doa): 31 July 2003
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 January 2004
Date of withdrawal of any conflicting National Standard (dow): 31 January 2004
ETSI
---------------------- Page: 6 ----------------------
SIST EN 300 019-2-7 V3.0.1:2006
5 ETSI EN 300 019-2-7 V3.0.1 (2003-04)
1 Scope

The present document specifies test methods and severities for the verification of the required resistibility of

telecommunication equipment according to the relevant environmental class.

The tests defined in the present document apply to portable and non-stationary use of equipment, covering the

environments stated in EN 300 019-1-7 [1].
2 References

The following documents contain provisions which, through reference in this text, constitute provisions of the present

document.

• References are either specific (identified by date of publication and/or edition number or version number) or

non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.

Referenced documents which are not found to be publicly available in the expected location might be found at

http://docbox.etsi.org/Reference.

[1] ETSI EN 300 019-1-7: "Environmental Engineering (EE); Environmental conditions and

environmental tests for telecommunications equipment; Part 1-7: Classification of environmental

conditions; Portable and non-stationary use".
[2] IEC 60068-2 (all parts): "Environmental testing - Part 2: Tests".

[3] ETSI EN 300 019-2-0: "Equipment Engineering (EE); Environmental conditions and

environmental tests for telecommunications equipment; Part 2-0: Specification of environmental

tests; Introduction".

[4] ISO 4180-2 (1980): "Complete, filled transport packages - General rules for the compilation of

performance test schedules - Part 2: Quantitive data".

[5] ETSI ETR 035: "Equipment Engineering (EE); Environmental engineering Guidance and

terminology".
3 Environmental test specifications

The detailed descriptions of the environmental conditions are given in clauses 4 and 5 of EN 300 019-1-7 [1].

EN 300 019-2-0 [3] forms a general overview of part 2 of the present document.

The equipment under test is assumed to be in its operational state throughout the test conditions described in this part

unless otherwise stated. The required performance before, during and after the test needs to be specified in the product

specification. Input and load conditions of the equipment shall be chosen to obtain full utilization of the equipment

under test. The heat dissipation shall be maximized, except for the steady state, low temperature test, where it shall be

minimized.
ETSI
---------------------- Page: 7 ----------------------
SIST EN 300 019-2-7 V3.0.1:2006
6 ETSI EN 300 019-2-7 V3.0.1 (2003-04)
3.1 Specification T 7.1: Temperature-controlled locations

This specification applies to use at, and direct transfer between, permanently temperature-controlled enclosed locations where humidity is usually not controlled. See tables 1, 5

and 6.

Table 1: Test specification T 7.1: Temperature-controlled locations - climatic tests

Environmental parameter Environmental Environmental test specification T7.1: Portable,

Class 7.1 Temperature - controlled location

Type Parameter Detail parameter Characteristic Test severity Duration Reference Method Notes

severity
low (°C) +5 +5 16 h Ab/Ad: Cold 1
IEC 60068-2-1 [2]
Air temperature high (°C) +40 +40 or +50 16 h Bb/Bd: Dry heat 2
IEC 60068-2-2 [2]
change (°C) +5/+25 +5/+25 3 cycles Na: Change of 3
IEC 60068-2-14 [2]
t = 3 h temperature
low (%) 5 none 4
relative high (%) 85 93 96 h Cb: Damp heat 5
IEC 60068-2-56 [2]
(°C) +30 +30 steady state
Humidity condensation (%) yes 90-100 2 cycles Db: Damp heat 6
IEC 60068-2-30 [2]
(°C) +30 Cyclic, variant 2
absolute 1 none 4
low (g/m )
25 none 7
high (g/m )
pressure low (kPa) 70 none 8
Air high (kPa) 106 none 8
speed (m/s) 5,0 none 4
intensity (mm/min) no
rain
Water low temperature (°C) no
other sources no
icing & frosting no
Radiation solar 700 none 11
(W/m )
heat 600 none 11
(W/m )
sulphur 0,3/1,0 none 12
SO (mg/m )
0,1/0,5 none 12
HS (mg/m )
Chemically salts Sea and road salt mist none 12
active
chlorine 0,1/0,3 none 12
Cl (mg/m )
substances
0,1/0,5 none 12
HCl (mg/m )
nitrogen 0,5/1,0 none 12
NO (mg/m )
1,0/3,0 none 12
NH (mg/m )
hydrogen fluoride 0,01/0,03 none 12
HF (mg/m )
ozone 0,05/0,1 none 12
O (mg/m )
ETSI
---------------------- Page: 8 ----------------------
SIST EN 300 019-2-7 V3.0.1:2006
7 ETSI EN 300 019-2-7 V3.0.1 (2003-04)

Environmental parameter Environmental Environmental test specification T7.1: Portable,

Class 7.1 Temperature - controlled location

Type Parameter Detail parameter Characteristic Test severity Duration Reference Method Notes

severity
Mechanically
dust 1,5 none 13
sedimentation (mg/(m h))
active
0,2 none 13
suspension (mg/m )
substances
sand 30 none 13
(mg/m )
Flora and micro organisms no
Fauna
rodents, insects no
no: This condition does not occur in this class.
none: Verification is required only in special cases.
NOTES: Number of note, see clause 3.4.
3.2 Specification T 7.2: Partly temperature-controlled locations

This specification applies to use at and direct transfer between, enclosed locations having neither temperature nor humidity control but where heating may be used to avoid low

temperatures. Building construction avoids extremely high temperatures. See tables 2, 5 and 6.

Table 2: Test specification T 7.2: Partly temperature-controlled locations - climatic tests

Environmental parameter Environmental Environmental test specification T7.2: Portable,

Class 7.2 Partly temperature- controlled locations

Type Parameter Detail parameter Characteristic Test severity Duration Reference Method Notes

severity
low (°C) -5 -5 16 h Ab/Ad: Cold 1
IEC 60068-2-1 [2]
Air temperature high (°C) +45 +45 or +55 16 h Bb/Bd: Dry heat 2
IEC 60068-2-2 [2]
change (°C) -5/+25 -5/+25 3 cycles Na: Change of 3
IEC 60068-2-14 [2]
t = 3 h temperature
low (%) 5 none 4
relative high (%) 95 93 96 h Cb: Damp heat 5
IEC 60068-2-56 [2]
(°C) +30 steady state
Humidity condensation (%) yes 90-100 2 cycles Db: Damp heat 6
IEC 60068-2-30 [2]
(°C) +30 Cyclic, variant 2
absolute 1 none 4
low (g/m )
29 none 7
high (g/m )
pressure low (kPa) 70 none 8
Air high (kPa) 106 none 8
speed (m/s) 5,0 none 4
intensity (mm/min) no
rain
Water low temperature (°C) no
other sources dripping water none 10
icing & frosting yes none 4
ETSI
---------------------- Page: 9 ----------------------
SIST EN 300 019-2-7 V3.0.1:2006
8 ETSI EN 300 019-2-7 V3.0.1 (2003-04)

Environmental parameter Environmental Environmental test specification T7.2: Portable,

Class 7.2 Partly temperature- controlled locations

Type Parameter Detail parameter Characteristic Test severity Duration Reference Method Notes

severity
Radiation solar 700 none 11
(W/m )
heat 600 none 11
(W/m )
sulphur 0,3/1,0 none 12
SO (mg/m )
0,1/0,5 none 12
HS (mg/m )
Chemically salts sea and road salt mist none 12
active
chlorine 0,1/0,3 none 12
Cl (mg/m )
substances
0,1/0,5 none 12
HCl (mg/m )
nitrogen 0,5/1,0 none 12
NO (mg/m )
1,0/3,0 none 12
NH (mg/m )
hydrogen fluoride 0,01/0,03 none 12
HF (mg/m )
ozone 0,05/0,1 none 12
O (mg/m )
Mechanically dust 20 none 13
sedimentation (mg/(m h))
active 3
5,0 none 13
suspension (mg/m )
substances
sand 300 none 13
(mg/m )
Flora and micro organisms moulds, fungus, etc. none 14
Fauna
rodents, insects rodents, etc. none 14
no: This condition does not occur in this class.
none: Verification is required only in special cases.
NOTES: Number of note, see clause 3.4.
ETSI
---------------------- Page: 10 ----------------------
SIST EN 300 019-2-7 V3.0.1:2006
9 ETSI EN 300 019-2-7 V3.0.1 (2003-04)

3.3 Specification T 7.3: Partly weatherprotected and non-weatherprotected locations

This specification applies to use at totally or partly weatherprotected locations of such construction that ext

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 300 019-1-0 V2.1.2:2006(Main)
Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 1-0: Classification of environmental conditions; Introduction
ETSI EN 300 019-1-0 V2.1.2 (2003-09)

The purpose of the present document is to select class(es) of environmental conditions and their severities to which equipment may be exposed. Only severe conditions, which may be harmful to the equipment, are included. The severities specified are those which will have a low probability of being exceeded; generally less than 1 %. The purpose of the present document is to form a general overview of Part 1. TR 100 035 [1] should be used in conjunction with all parts of EN 300 019 series. It gives...view more

    • sale - 10%
    • Standard
      10 pages
      English language
SIST
SIST EN 300 019-1-5 V2.1.4:2006(Main)
Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 1-5: Classification of environmental conditions; Ground vehicle installations
ETSI EN 300 019-1-5 V2.1.4 (2003-04)

The present document defines the classes of environmental conditions and their severities to which equipment may be exposed in ground vehicles. Only severe conditions, which may be harmful to the equipment, are included. The severities specified are those which will have a low probability of being exceeded; generally less than 1 %. The present document applies to equipment when in use and permanently or temporarily installed in ground vehicles.

    • sale - 10%
    • Standard
      12 pages
      English language
SIST
SIST EN 300 019-2-3 V2.2.1:2006(Main)
Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-3: Specification of environmental tests; Stationary use at weatherprotected locations
ETSI EN 300 019-2-3 V2.2.1 (2003-03)

The present document specifies test severities and methods for the verification of the required resistibility of equipment according to the relevant environmental class. The tests in Part 2-3 of this multi-part EN apply to stationary use of equipment at weatherprotected locations covering the environmental conditions stated in EN 300 019-1-3 [1].

    • sale - 10%
    • Standard
      31 pages
      English language
SIST
SIST EN 300 019-2-5 V2.1.2:2006(Main)
Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-5: Specification of environmental tests; Ground vehicle installations
ETSI EN 300 019-2-5 V2.1.2 (2001-09)

The present document specifies test methods and severities for the verification of the required resistibility of telecommunication equipment according to the relevant environmental class. The tests in the present document apply to the use of equipment installed permanently or temporarily in ground vehicles and cover the vehicles and the environmental conditions stated in ETS 300 019-1-5 [1]. The tests cover installations in vehicles powered by electric motors and combustion engines. Applications...view more

    • sale - 10%
    • Standard
      16 pages
      English language
SIST
SIST EN 300 019-2-6 V2.1.2:2006(Main)
Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-6: Specification of environmental tests; Ship environments
ETSI EN 300 019-2-6 V2.1.2 (2001-09)

The present document specifies test severities and methods for the verification of the required resistibility of equipment according to the relevant environmental class. The tests defined in the present document apply to the use of telecommunication equipment installed permanently or temporarily in ships and cover the environments and the vessels stated in ETS 300 019-1-6 [1].

    • sale - 10%
    • Standard
      17 pages
      English language
SIST
SIST EN 300 019-1-2 V2.1.2:2006(Main)
Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 1-2: Classification of environmental conditions; Transportation
ETSI EN 300 019-1-2 V2.1.2 (2002-04)

The present document defines classes of environmental conditions and their severities to which telecommunication equipment may be exposed. The severities specified are those which will have a low probability of being exceeded; generally less than 1 %. The present document applies to equipment being transported from one place to another after being made ready for dispatch from the manufacturer's works. The most commonly used methods of transportation have been taken into account, i.e. ground, wat...view more

    • sale - 10%
    • Standard
      12 pages
      English language
SIST
SIST EN 300 019-1-7 V2.1.2:2006(Main)
Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 1-7: Classification of environmental conditions; Portable and non-stationary use
ETSI EN 300 019-1-7 V2.1.2 (2002-04)

The present document defines classes of environmental conditions and their severities to which telecommunication equipment may be exposed. The severities specified are those which will have a low probability of being exceeded; generally less than 1 %. The present document applies to equipment during portable and non-stationary use including periods of transfer, down time, maintenance and repair at locations defined in clauses 3 to 5.

    • sale - 10%
    • Standard
      15 pages
      English language
SIST
SIST EN 300 019-1-3 V2.1.1:2006(Main)
Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 1-3: Classification of environmental conditions; Stationary use at weatherprotected locations
ETSI EN 300 019-1-3 V2.1.1 (2002-11)

The present document defines classes of environmental conditions and their severities to which telecommunication equipment may be exposed. The severities specified are those which will have a low probability of being exceeded; generally less than 1 %. The present document applies to equipment mounted for stationary use including periods of erection work, down time, maintenance and repair at weatherprotected locations defined in clause 5.

    • sale - 10%
    • Standard
      20 pages
      English language
SIST
SIST EN 300 119-1 V2.1.1:2006(Main)
Environmental Engineering (EE); European telecommunication standard for equipment practice; Part 1: Introduction and terminology
ETSI EN 300 119-1 V2.1.1 (2004-09)

The present document sets out the major engineering requirements for telecommunications equipment forming part of a public telecommunications network installed either on public telecommunications operators' sites or in premises of operators' customers. It is expected that the areas of transmission equipment and switching equipment will increasingly merge into one. As a result, the present document should be applied to all forms of telecommunications equipment. The operating authorities should be...view more

    • sale - 10%
    • Standard
      8 pages
      English language
SIST
SIST EN 300 019-1-5 V2.1.2:2006(Main)
Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 1-5: Classification of environmental conditions; Ground vehicle installations
ETSI EN 300 019-1-5 V2.1.2 (2002-04)

The present document defines the classes of environmental conditions and their severities to which equipment may be exposed in ground vehicles. Only severe conditions, which may be harmful to the equipment, are included. The severities specified are those which will have a low probability of being exceeded; generally less than 1 %. The present document applies to equipment when in use and permanently or temporarily installed in ground vehicles.

    • sale - 10%
    • Standard
      14 pages
      English language