oSIST prEN 17508:2020
(Main)This document specifies terms and definitions for different PVC based materials used for the production of unplasticized polyvinylchloride (PVC-U) profiles for windows and doors.
It describes the content and meaning of post-consumer and post-industrial recyclate as it is used in new products. It distinguishes between different PVC recepies used in production for PVC window and door profiles.
This document shall serve as the reference standard for definitions used in related standards such as all parts of EN 12608, EN 17410 or standards for PVC based profiles for building applications.
Kunststoffe - Profile aus weichmacherfreiem Polyvinylchlorid (PVC-U) zur Herstellung von Fenstern und Türen - Terminologie von Werkstoffen auf Basis von PVC
Plastiques - Profilés de polychlorure de vinyle non plastifié (PVC-U) pour la fabrication des fenêtres et des portes - Terminologie des matériaux à base de PVC
Polimerni materiali - Profili iz trdega polivinilklorida (PVC-U) za izdelavo oken in vrat - Terminologija za materiale na osnovi PVC
General Information
Standards Content (sample)
SLOVENSKI STANDARD
oSIST prEN 17508:2020
01-julij-2020
Polimerni materiali - Profili iz trdega polivinilklorida (PVC-U) za izdelavo oken in
vrat - Terminologija za materiale na osnovi PVCPlastics - Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows
and doors - Terminology of PVC based materialsKunststoffe - Profile aus weichmacherfreiem Polyvinylchlorid (PVC-U) zur Herstellung
von Fenstern und Türen - Terminologie von Werkstoffen auf Basis von PVCPlastiques - Profilés de polychlorure de vinyle non plastifié (PVC-U) pour la fabrication
des fenêtres et des portes - Terminologie des matériaux à base de PVCTa slovenski standard je istoveten z: prEN 17508
ICS:
83.140.99 Drugi izdelki iz gume in Other rubber and plastics
polimernih materialov products
91.060.50 Vrata in okna Doors and windows
oSIST prEN 17508:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------oSIST prEN 17508:2020
---------------------- Page: 2 ----------------------
oSIST prEN 17508:2020
DRAFT
EUROPEAN STANDARD
prEN 17508
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2020
ICS 83.140.99
English Version
Plastics - Unplasticized polyvinylchloride (PVC-U) profiles
for the fabrication of windows and doors - Terminology of
PVC based materials
Plastiques - Profilés de polychlorure de vinyle non Kunststoffe - Profile aus weichmacherfreiem
plastifié (PVC-U) pour la fabrication des fenêtres et des Polyvinylchlorid (PVC-U) zur Herstellung von Fenstern
portes - Terminologie des matériaux à base de PVC und Türen - Terminologie von Werkstoffen auf Basis
von PVCThis draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 249.If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17508:2020 E
worldwide for CEN national Members.---------------------- Page: 3 ----------------------
oSIST prEN 17508:2020
prEN 17508:2020 (E)
Contents Page
European foreword ....................................................................................................................................................... 3
1 Scope .................................................................................................................................................................... 4
2 Normative references .................................................................................................................................... 4
3 Terms and definitions ................................................................................................................................... 4
Bibliography .................................................................................................................................................................... 7
---------------------- Page: 4 ----------------------oSIST prEN 17508:2020
prEN 17508:2020 (E)
European foreword
This document (prEN 17508:2020) has been prepared by Technical Committee CEN/TC 249 “Plastics”,
the secretariat of which is held by NBN.This document is currently submitted to the CEN Enquiry.
---------------------- Page: 5 ----------------------
oSIST prEN 17508:2020
prEN 17508:2020 (E)
1 Scope
This document specifies terms and definitions for different PVC based materials used for the production
of unplasticized polyvinylchloride (PVC-U) profiles for windows and doors.It d
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.