83.140.99 - Other rubber and plastics products

This document specifies various test methods to ensure the performance of polymeric composite and reinforced polymeric composite sleepers, bearers and transoms for use in tracks. It is applicable to the sleepers, bearers and transoms to be installed in tracks with or without a ballast.

This European Standard specifies the classifications, requirements and test methods for non-coated unplasticized poly(vinyl chloride) (PVC-U) profiles with light coloured surfaces intended to be used for the fabrication of windows and doors.
It is applicable to PVC-U profiles with the colorimetric co-ordinates measured on the visible surfaces, as follows:
-   L* ≥ 82 (chromaticity co-ordinate Y ≥ 60),
-   -2,5 ≤ a* ≤ 5,
-   -5 ≤ b* ≤ 15.
NOTE 1   For editorial reasons in this document the term "win...view more

This document specifies requirements for packaged sterile, or bulked non-sterile, rubber gloves intended for use in medical examinations and diagnostic or therapeutic procedures to protect the patient and the user from cross-contamination. It also covers rubber gloves intended for use in handling contaminated medical materials and gloves with smooth surfaces or with textured surfaces over all or part of the glove. This document is intended as a reference for the performance and safety of rubber ...view more

This document specifies general requirements and relevant test methods for rubber bands made of dry natural rubber used for general purposes such as for daily wrapping or packaging. This document is not applicable for cover rubber bands made of blend and synthetic rubbers. This document is not applicable for rubber bands used for engineering applications, for food contact, nor for medical uses.

This document specifies the specification for ISO Class 4, ISO Class 5 and ISO Class 6 nitrile cleanroom gloves. It is applicable to cleanroom gloves made of acrylonitrile butadiene material.

This document specifies the types and proportions of raw materials to be used for wood-plastic recycled composites (hereafter referred to as WPRC). It also specifies the health and safety requirements for WPRC and the methods to test these properties. This document is applicable to WPRC which are primarily used as building materials.

This document specifies a test method for determining the peel strength of poly(vinyl chloride) (PVC) based profiles laminated with foils.

This document specifies a test method for determining the peel strength of poly(vinyl chloride) (PVC) based profiles laminated with foils.

This document provides guidance on ISO 22762-3:2018. It includes examples of design calculations, and provides data on the characteristics obtained from all types of elastomeric isolators.

This document specifies a method for exposing specimens made from poly(vinyl chloride) (PVC) based profiles to xenon-arc radiation, in order to assess changes in characteristics.
It is applicable to PVC based profiles including those covered with foil, lacquered or coextruded.
NOTE   The determination of changes in colour and variations of properties after exposure of PVC based profiles to xenon-arc radiation is described in an informative Annex A.

This document specifies a method for exposing specimens made from poly(vinyl chloride) (PVC) based profiles to xenon-arc radiation, in order to assess changes in characteristics.
It is applicable to PVC based profiles including those covered with foil, lacquered or coextruded.
NOTE The determination of changes in colour and variations of properties after exposure of PVC based profiles to xenon-arc radiation is described in an informative Annex A.

This document specifies minimum requirements and test methods for elastomeric seismic isolators used for buildings and the rubber material used in the manufacture of such isolators. It is applicable to elastomeric seismic isolators used to provide buildings with protection from earthquake damage. The isolators covered consist of alternate elastomeric layers and reinforcing steel plates. They are placed between a superstructure and its substructure to provide both flexibility for decoupling struc...view more

This document specifies minimum requirements and test methods for elastomeric seismic isolators used for bridges, as well as rubber material used in the manufacture of such isolators. It is applicable to elastomeric seismic isolators used to provide bridges with protection from earthquake damage. The isolators covered consist of alternate elastomeric layers and reinforcing steel plates, which are placed between a superstructure and its substructure to provide both flexibility for decoupling stru...view more

This document specifies the test methods for determination of a) the properties of the rubber material used to manufacture the elastomeric seismic isolators, and b) the characteristics of elastomeric seismic isolators. It is applicable to elastomeric seismic isolators used to provide buildings or bridges with protection from earthquake damage. The isolators covered consist of alternate elastomeric layers and reinforcing steel plates which are placed between a superstructure and its substructure ...view more

This document specifies a method for the determination of the apparent hardness of vulcanized- or thermoplastic-rubber roller covers, expressed as the Pusey and Jones indentation value. The Pusey and Jones plastometer apparatus is used to measure the depth of indentation of an indentor under a specified force into the surface of the rubber. The indentation value is not the same as that measured by the international rubber hardness test method ISO 48-2, since in this method the rubber immediately...view more

This document specifies a method for the determination of the apparent hardness of vulcanized- or thermoplastic-rubber roller covers, expressed in Shore hardness, for measurement where only medium precision is required. The method and apparatus used are essentially those described in ISO 48-4, the measurements in this case being made on the curved surface of the conditioned rubber-covered roller rather than on a flat test piece. Shore type A and type D instruments are specified, the latter being...view more

This document specifies a method for the determination of the apparent hardness, expressed in International Rubber Hardness Degrees (IRHD), of vulcanized- or thermoplastic-rubber roller covers. The method is similar in principle to the methods used for the determination of the hardness of rubber in ISO 48-2 in that it consists essentially of measuring the depth of penetration of a spherical indentor operating under a specified force. The apparatus used is similar to that described in ISO 48-2, h...view more

This document specifies mechanical and optical test methods for the determination of particle size of lignocellulosic material for use in wood plastic composites (WPC) and natural fibre composites (NFC).

This European Standard specifies a method for determining the effect of heat on unplasticized poly(vinyl chloride) (PVC-U) profiles, to be carried out in air at 150 °C.
It is also applicable to PVC-based profiles at specified temperatures/test conditions.

This European Standard specifies a tensile bending method and a compression bending method for determining the failure stress of welded corners and T-joints made from unplasticized poly(vinyl chloride) (PVC-U) profiles.
This European Standard is applicable to PVC-U profiles for the fabrication of windows and doors.