The present document applies to equipment operating on radio frequencies between 25 MHz and 3 GHz, using analogue, digital and hybrid (using both analogue and digital modulation) modulation.
The present document applies to the following radio equipment types:
• Professional Wireless Microphone Systems (PWMS);
• in ear monitoring systems;
• consumer radio microphones;
• tour guide systems; and
• Assistive Listening Devices (Aids for the handicapped) comprising personal and public hearing aid systems.
The maximum power recommended for equipment covered by the present document is 250 mW for radio microphones and 500 mW for public hearing aids in the 169,4 MHz to 169,8125 MHz band (erp below 1 GHz and eirp above 1 GHz).
The present document also covers radio microphones used in the 863 MHz to 865 MHz band, with a maximum power of 10 mW.
The present document is intended to cover the provisions of Directive 1999/5/EC [i.1] (R&TTE Directive): Article 3.2, which states that "….. radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of Article 3 of the R&TTE Directive may apply to equipment within the scope of the present document.

Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) - Brezžični mikrofoni v frekvenčnem območju od 25 MHz do 3 GHz - 2. del: Harmonizirani EN, ki zajema bistvene zahteve člena 3.2 direktive R&TTE

Ta dokument velja za opremo, ki deluje na radijskih frekvencah med 25 MHz in 3 GHz z uporabo analogne, digitalne in hibridne (uporaba analogne in digitalne modulacije) modulacije.
Ta dokument velja za naslednje vrste radijske opreme:
• profesionalni sistemi brezžičnih mikrofonov (PWMS);
• nadzorni sistemi v ušesu;
• potrošniški radijski mikrofoni;
• sistemi za vodenje; in
• podporne slušne naprave (pripomočki za invalide), sestavljene iz osebnih in javnih sistemov slušnih pripomočkov.
Maksimalna priporočena moč za opremo, zajeto v tem standardu, je 250 mW za radijske mikrofone in 500 mW za javne slušne pripomočke v pasu od 169,4 MHz do 169,8125 MHz (erp pod 1 GHz in eirp nad 1 GHz).
Ta dokument prav tako zajema radijske mikrofone, ki se uporabljajo v pasu od 863 MHz do 865 MHz, z maksimalno močjo 10 mW.
Namen tega dokumenta je zajeti določbe Direktive 1999/5/ES [i.1] (direktive R&TTE): Člen 3.2, ki navaja, da »….. radijska oprema je narejena tako, da učinkovito izrablja spekter, razporejen za prizemne/vesoljske radiokomunikacije in orbitalne vire, tako da ne pride do škodljivega motenja«.
Poleg tega dokumenta se preostali EN, ki določajo tehnične zahteve v skladu z bistvenimi zahtevami v drugih delih člena 3 direktive R&TTE, lahko uporabljajo za opremo v okviru področja uporabe tega dokumenta.
OPOMBA: Seznam teh EN je naveden na spletni strani http://www.newapproach.org.

General Information

Status
Published
Public Enquiry End Date
31-Mar-2011
Publication Date
19-Sep-2011
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
05-Sep-2011
Due Date
10-Nov-2011
Completion Date
20-Sep-2011
Mandate

Buy Standard

Standard
SIST EN 300 422-2 V1.3.1:2011
English language
18 pages
sale - 10%
Preview
sale - 10%
Preview

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.577(Electromagnetic compatibility and Radio spectrum Matters (ERM) - Wireless microphones in the 25 MHz to 3 GHz frequency range - Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive33.160.50PriborAccessories33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.99Druga oprema za radijske komunikacijeOther equipment for radiocommunicationsICS:Ta slovenski standard je istoveten z:EN 300 422-2 Version 1.3.1SIST EN 300 422-2 V1.3.1:2011en01-oktober-2011SIST EN 300 422-2 V1.3.1:2011SLOVENSKI

STANDARD
SIST EN 300 422-2 V1.3.1:2011

ETSI EN 300 422-2 V1.3.1 (2011-08) Electromagnetic compatibility and Radio spectrum Matters (ERM); Wireless microphones in the 25 MHz to 3 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

Harmonized European Standard SIST EN 300 422-2 V1.3.1:2011
ETSI ETSI EN 300 422-2 V1.3.1 (2011-08) 2

Reference REN/ERM-TG17WG3-014-2 Keywords audio, radio, radio MIC, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88

Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2011. All rights reserved.

DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 300 422-2 V1.3.1:2011

ETSI ETSI EN 300 422-2 V1.3.1 (2011-08) 3 Contents Intellectual Property Rights ................................................................................................................................ 5 Foreword ............................................................................................................................................................. 5 Introduction ........................................................................................................................................................ 5 1 Scope ........................................................................................................................................................ 6 2 References ................................................................................................................................................ 6 2.1 Normative references ......................................................................................................................................... 6 2.2 Informative references ........................................................................................................................................ 7 3 Definitions, symbols and abbreviations ................................................................................................... 7 3.1 Definitions .......................................................................................................................................................... 7 3.2 Symbols .............................................................................................................................................................. 7 3.3 Abbreviations ..................................................................................................................................................... 7 Part I: Radio microphones

........................................................................................................................... 7 4 Technical requirements specifications ..................................................................................................... 7 4.1 Environmental profile ......................................................................................................................................... 7 4.2 Conformance requirements ................................................................................................................................ 8 4.2.1 Frequency stability ........................................................................................................................................ 8 4.2.1.1 Definition ................................................................................................................................................ 8 4.2.1.2 Limit ........................................................................................................................................................ 8 4.2.1.3 Conformance ........................................................................................................................................... 8 4.2.2 Rated Output Power ...................................................................................................................................... 8 4.2.2.1 Definition ................................................................................................................................................ 8 4.2.2.2 Limit ........................................................................................................................................................ 8 4.2.2.3 Conformance ........................................................................................................................................... 8 4.2.3 Necessary bandwidth .................................................................................................................................... 8 4.2.3.1 Definition ................................................................................................................................................ 8 4.2.3.2 Limit ........................................................................................................................................................ 8 4.2.3.3 Conformance ........................................................................................................................................... 8 4.2.4 Spurious emissions ....................................................................................................................................... 8 4.2.4.1 Definition ................................................................................................................................................ 8 4.2.4.2 Limit ........................................................................................................................................................ 8 4.2.4.3 Conformance ........................................................................................................................................... 9 4.3 Receiver requirements ........................................................................................................................................ 9 4.3.1 Spurious emissions ....................................................................................................................................... 9 4.3.1.1 Definition ................................................................................................................................................ 9 4.3.1.2 Limit ........................................................................................................................................................ 9 4.3.1.3 Conformance ........................................................................................................................................... 9 5 Testing for compliance with technical requirements ................................................................................ 9 5.1 Environmental conditions for testing ................................................................................................................. 9 5.2 Interpretation of the measurement results .......................................................................................................... 9 5.3 Essential radio test suites .................................................................................................................................. 10 5.3.1 Transmitter test suites ................................................................................................................................. 10 5.3.1.1 Frequency stability ................................................................................................................................ 10 5.3.1.2 Rated Output Power .............................................................................................................................. 10 5.3.1.3 Necessary bandwidth ............................................................................................................................ 10 5.3.1.4 Spurious emissions ................................................................................................................................ 10 5.3.2 Receiver test suites...................................................................................................................................... 10 5.3.2.1 Spurious emissions ................................................................................................................................ 10 Part II: Assistive listening devices ................................................................................................................. 11 6 Technical requirements specifications ................................................................................................... 11 6.1 Environmental profile ....................................................................................................................................... 11 SIST EN 300 422-2 V1.3.1:2011

ETSI ETSI EN 300 422-2 V1.3.1 (2011-08) 4 6.2 Conformance requirements .............................................................................................................................. 11 6.2.1 Frequency stability ...................................................................................................................................... 11 6.2.1.1 Definition .............................................................................................................................................. 11 6.2.1.2 Limit ...................................................................................................................................................... 11 6.2.1.3 Conformance ......................................................................................................................................... 11 6.2.2 Rated Output Power .................................................................................................................................... 11 6.2.2.1 Definition .............................................................................................................................................. 11 6.2.2.2 Limit ...................................................................................................................................................... 11 6.2.2.3 Conformance ......................................................................................................................................... 11 6.2.3 Necessary bandwidth .................................................................................................................................. 11 6.2.3.1 Definition .............................................................................................................................................. 11 6.2.3.2 Limit ...................................................................................................................................................... 12 6.2.3.3 Conformance ......................................................................................................................................... 12 6.2.4 Spurious emissions ..................................................................................................................................... 12 6.2.4.1 Definition .............................................................................................................................................. 12 6.2.4.2 Limit ...................................................................................................................................................... 12 6.2.4.3 Conformance ......................................................................................................................................... 12 6.3 Receiver requirements ...................................................................................................................................... 12 6.3.1 Spurious emissions ..................................................................................................................................... 12 6.3.1.1 Definition .............................................................................................................................................. 12 6.3.1.2 Limit ...................................................................................................................................................... 12 6.3.1.3 Conformance ......................................................................................................................................... 12 7 Testing for compliance with technical requirements .............................................................................. 12 7.1 Environmental conditions for testing ............................................................................................................... 12 7.2 Interpretation of the measurement results ........................................................................................................ 13 7.3 Essential radio test suites .................................................................................................................................. 13 7.3.1 Transmitter test suites ................................................................................................................................. 13 7.3.1.1 Frequency stability ................................................................................................................................ 13 7.3.1.2 Rated Output Power .............................................................................................................................. 13 7.3.1.3 Necessary bandwidth ............................................................................................................................ 13 7.3.1.4 Spurious emissions ................................................................................................................................ 14 7.3.2 Receiver test suites...................................................................................................................................... 14 7.3.2.1 Spurious emissions ................................................................................................................................ 14 Annex A (normative): HS Requirements and conformance Test specifications Table (HS-RTT) ........................................................................................................ 15 Annex B (informative): The EN title in the official languages ........................................................... 17 History .............................................................................................................................................................. 18

SIST EN 300 422-2 V1.3.1:2011

ETSI ETSI EN 300 422-2 V1.3.1 (2011-08) 5 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/34/EC [i.2] (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations. The title and reference to the present document are intended to be included in the publication in the Official Journal of the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC [i.1]. See article 5.1 of Directive 1999/5/EC [i.1] for information on presumption of conformity and Harmonised Standards or parts thereof the references of which have been published in the Official Journal of the European Union. The requirements relevant to Directive 1999/5/EC [i.1] are summarised in annex A. The present document is part 2 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1]. National regulations on maximum power output will apply.

National transposition dates Date of adoption of this EN: 8 August 2011 Date of latest announcement of this EN (doa): 30 November 2011 Date of latest publication of new National Standard or endorsement of this EN (dop/e):

31 May 2012 Date of withdrawal of any conflicting National Standard (dow): 31 May 2013

Introduction The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [i.1]. The modular structure is shown in EG 201 399 [i.3]. SIST EN 300 422-2 V1.3.1:2011

ETSI ETSI EN 300 422-2 V1.3.1 (2011-08) 6 1 Scope The present document applies to equipment operating on radio frequencies between 25 MHz and 3 GHz, using analogue, digital and hybrid (using both analogue and digital modulation) modulation.

The present document applies to the following radio equipment types: • Professional Wireless Microphone Systems (PWMS); • in ear monitoring systems; • consumer radio microphones; • tour guide systems; and • Assistive Listening Devices (Aids for the handicapped) comprising personal and public hearing aid systems.

The maximum power recommended for equipment covered by the present document is 250 mW for radio microphones and 500 mW for public hearing aids in the 16

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.