SIST EN 301 489-1 V2.2.3:2020

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.PDJQHWQR]GUXåOMLYRVWElectroMagnetic Compatibility (EMC) standard for radio equipment and services - Part 1: Common technical requirements - Harmonised Standard for ElectroMagnetic Compatibility33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.01Radijske komunikacije na splošnoRadiocommunications in generalICS:Ta slovenski standard je istoveten z:ETSI EN 301 489-1 V2.2.1 (2019-03)oSIST prEN 301 489-1 V2.2.1:2019en01-maj-2019oSIST prEN 301 489-1 V2.2.1:2019SLOVENSKI

Draft ETSI EN 301 489-1 V2.2.1 (2019-03) ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements; Harmonised Standard for ElectroMagnetic Compatibility

Reference REN/ERM-EMC-368 Keywords EMC, harmonised standard, radio ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE

Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88

Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI deliverable is the one made publicly available in PDF format at www.etsi.org/deliver. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.

DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETM are trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the oneM2M Partners. GSM® and the GSM logo are trademarks registered and owned by the GSM Association. oSIST prEN 301 489-1 V2.2.1:2019

ETSI Draft ETSI EN 301 489-1 V2.2.1 (2019-03)3 Contents Intellectual Property Rights ................................................................................................................................ 6 Foreword ............................................................................................................................................................. 6 Modal verbs terminology .................................................................................................................................... 8 Introduction ........................................................................................................................................................ 8 1 Scope ........................................................................................................................................................ 9 2 References ................................................................................................................................................ 9 2.1 Normative references ......................................................................................................................................... 9 2.2 Informative references ...................................................................................................................................... 10 3 Definition of terms, symbols and abbreviations ..................................................................................... 11 3.1 Terms ................................................................................................................................................................ 11 3.2 Symbols ............................................................................................................................................................ 14 3.3 Abbreviations ................................................................................................................................................... 14 4 Test conditions ....................................................................................................................................... 15 4.1 General ............................................................................................................................................................. 15 4.2 Arrangements for test signals ........................................................................................................................... 15 4.2.0 General ........................................................................................................................................................ 15 4.2.1 Arrangements for test signals at the input of transmitters ........................................................................... 15 4.2.2 Arrangements for test signals at the RF output of transmitters ................................................................... 15 4.2.3 Arrangements for test signals at the RF input of receivers ......................................................................... 15 4.2.4 Arrangements for test signals at the output of receivers ............................................................................. 16 4.3 RF exclusion band of radio equipment ............................................................................................................. 16 4.3.1 General ........................................................................................................................................................ 16 4.3.2 Exclusion band for transmitters or the transmitter part of transceivers....................................................... 16 4.3.2.1 General .................................................................................................................................................. 16 4.3.2.2 Channelized Equipment ........................................................................................................................ 16 4.3.2.3 Non-Channelized Equipment ................................................................................................................ 17 4.3.3 Exclusion band for receivers or the receiver part of transceivers ............................................................... 17 4.3.3.1 Applicability.......................................................................................................................................... 17 4.3.3.2 Channelized Equipment ........................................................................................................................ 17 4.3.3.3 Non-Channelized Equipment ................................................................................................................ 17 4.4 Void .................................................................................................................................................................. 17 5 Ancillary equipment ............................................................................................................................... 18 6 Performance criteria ............................................................................................................................... 18 6.0 Introduction ...................................................................................................................................................... 18 6.1 Performance criteria for continuous phenomena .............................................................................................. 18 6.2 Performance criteria for transient phenomena .................................................................................................. 18 7 Applicability tables................................................................................................................................. 19 7.0 Introduction ...................................................................................................................................................... 19 7.1 Emissions ......................................................................................................................................................... 19 7.2 Immunity .......................................................................................................................................................... 19 8 Methods of measurement and limits for EMC emissions ...................................................................... 20 8.1 Introduction ...................................................................................................................................................... 20 8.1.1 Emissions test overview .............................................................................................................................. 20 8.1.2 Test configuration ....................................................................................................................................... 20 8.2 Enclosure port .................................................................................................................................................. 20 8.2.1 General ........................................................................................................................................................ 20 8.2.2 Test method ................................................................................................................................................ 21 8.2.3 Limits .......................................................................................................................................................... 21 8.3 DC power input/output ports ............................................................................................................................ 21 8.3.1 General ........................................................................................................................................................ 21 8.3.2 Test method ................................................................................................................................................ 21 oSIST prEN 301 489-1 V2.2.1:2019

ETSI Draft ETSI EN 301 489-1 V2.2.1 (2019-03)4 8.3.3 Limits .......................................................................................................................................................... 21 8.4 AC mains power input/output ports ................................................................................................................. 22 8.4.1 General ........................................................................................................................................................ 22 8.4.2 Test method ................................................................................................................................................ 22 8.4.3 Limits .......................................................................................................................................................... 22 8.4.3.1 General .................................................................................................................................................. 22 8.4.3.2 AC Power port used for power supply only .......................................................................................... 22 8.4.3.3 AC power input port also used for PLC Communications .................................................................... 22 8.5 Harmonic current emissions (AC mains input port) ......................................................................................... 23 8.6 Voltage fluctuations and flicker (AC mains input port) ................................................................................... 23 8.7 Wired network ports ......................................................................................................................................... 23 8.7.1 General ........................................................................................................................................................ 23 8.7.2 Test method ................................................................................................................................................ 23 8.7.3 Limits .......................................................................................................................................................... 23 9 Test methods and levels for immunity tests ........................................................................................... 23 9.1 Test configuration............................................................................................................................................. 23 9.2 Radio frequency electromagnetic field (80 MHz to 6 000 MHz) ..................................................................... 24 9.2.1 General ........................................................................................................................................................ 24 9.2.2 Test method ................................................................................................................................................ 24 9.2.3 Performance criteria .................................................................................................................................... 25 9.3 Electrostatic discharge ...................................................................................................................................... 25 9.3.1 General ........................................................................................................................................................ 25 9.3.2 Test method ................................................................................................................................................ 25 9.3.3 Performance criteria .................................................................................................................................... 25 9.4 Fast transients, common mode ......................................................................................................................... 25 9.4.1 General ........................................................................................................................................................ 25 9.4.2 Test method ................................................................................................................................................ 25 9.4.3 Performance criteria .................................................................................................................................... 26 9.5 Radio frequency, common mode ...................................................................................................................... 26 9.5.1 General ........................................................................................................................................................ 26 9.5.2 Test method ................................................................................................................................................ 26 9.5.3 Performance criteria .................................................................................................................................... 26 9.6 Transients and surges in the vehicular environment ......................................................................................... 27 9.6.1 General ........................................................................................................................................................ 27 9.6.2 Test method ................................................................................................................................................ 27 9.6.3 Performance criteria .................................................................................................................................... 27 9.7 Voltage dips and interruptions .......................................................................................................................... 27 9.7.1 General ........................................................................................................................................................ 27 9.7.2 Test method ................................................................................................................................................ 27 9.7.3 Performance criteria .................................................................................................................................... 28 9.8 Surges ............................................................................................................................................................... 28 9.8.1 General ........................................................................................................................................................ 28 9.8.2 Test method ................................................................................................................................................ 28 9.8.2.0 General .................................................................................................................................................. 28 9.8.2.1 Test method for wired network ports directly connected to outdoor cables .......................................... 28 9.8.2.2 Test method for wired network ports connected to indoor cables ......................................................... 29 9.8.2.3 Test method for mains ports .................................................................................................................. 29 9.8.3 Performance criteria .................................................................................................................................... 29 Annex A (informative): Relationship between the present document and the essential requirements of Directive 2014/53/EU ......................................................... 30 A.1 Relationship between the present document and the essential requirements of Directive 2014/53/EU ............................................................................................................................................ 30 Annex B (informative): Application of harmonised EMC standards to multi-radio and multi-standard-radio equipment ............................................................................ 32 B.1 Introduction ............................................................................................................................................ 32 B.2 Multi-radio equipment capable of independent operation ...................................................................... 32 oSIST prEN 301 489-1 V2.2.1:2019

ETSI Draft ETSI EN 301 489-1 V2.2.1 (2019-03)5 B.3 Multi-radio equipment and multi-standard-radio equipment not capable of independent operation ..... 32 B.4 Multi-radio equipment comprising of numerous identical radio transmitters ........................................ 32 Annex C (informative): Information required by the test laboratory ............................................... 33 C.1 Information to be supplied ..................................................................................................................... 33 Annex D (informative): Bibliography ................................................................................................... 34 Annex E (informative): Change history ............................................................................................... 35 History .............................................................................................................................................................. 36

ETSI Draft ETSI EN 301 489-1 V2.2.1 (2019-03)6 Intellectual Property Rights Essential patents

IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https://ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM), and is now submitted for the combined Public Enquiry and Vote phase of the ETSI standards EN Approval Procedure. The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.16] to provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC [i.1]. Once the present document is cited in the Official Journal of the European Union under the Directives, compliance with the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present document, a presumption of conformity with the corresponding essential requirements of the corresponding Directives and associated EFTA regulations. The present document is part 1 of a multi-part EMC standard for radio equipment which is structured in the following way: • All common technical requirements for EMC emission and immunity have been placed in the common part, which is the present document. • Separate parts have been developed to cover specific product related radio equipment test conditions, test arrangements, performance assessment, performance criteria, etc. • A clause is included in each of the specific radio parts, entitled "special conditions", which is used as appropriate to cover any deviations or additions to the common requirements set out in the present document. The present document is part 1 of a multi-part deliverable covering ElectroMagnetic Compatibility (EMC) standard for radio equipment and services, as identified below: Part 1: "Common technical requirements; Part 2: "Specific conditions for radio paging equipment"; Part 3: "Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz"; Part 4: "Specific conditions for fixed radio links and ancillary equipment"; oSIST prEN 301 489-1 V2.2.1:2019

ETSI Draft ETSI EN 301 489-1 V2.2.1 (2019-03)7 Part 5: "Specific conditions for Private land Mobile Radio (PMR) and ancillary equipment (speech and non-speech) and Terrestrial Trunked Radio (TETRA)"; Part 6: "Specific conditions for Digital Enhanced Cordless Telecommunications (DECT) equipment"; Part 9: "Specific conditions for wireless microphones, similar Radio Frequency (RF) audio link equipment, cordless audio and in-ear monitoring devices"; Part 12: "Specific conditions for Very Small Aperture Terminal, Satellite Interactive Earth Stations operated in the frequency ranges between 4 GHz and 30 GHz in the Fixed Satellite Service (FSS)"; Part 13: "Specific conditions for Citizens' Band (CB) radio and ancillary equipment (speech and non-speech)"; Part 15: "Specific conditions for commercially available amateur radio equipment"; Part 17: "Specific conditions for Broadband Data Transmission Systems"; Part 19: "Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band providing data communications and GNSS receivers operating in the RNSS band (ROGNSS) providing positioning, navigation, and timing data"; Part 20: "Specific conditions for Mobile Earth Stations (MES) used in the Mobile Satellite Services (MSS)"; Part 22: "Specific conditions for ground based VHF aeronautical mobile and fixed radio equipment"; Part 27: "Specific conditions for Ultra Low Power Active Medical Implants (ULP-AMI) and related peripheral devices (ULP-AMI-P) operating in the 402 MHz to 405 MHz bands"; Part 28: "Specific conditions for wireless digital video links"; Part 29: "Specific conditions for Medical Data Service Devices (MEDS) operating in the 401 MHz to 402 MHz and 405 MHz to 406 MHz bands"; Part 31: "Specific conditions for equipment in the 9 kHz to 315 kHz band for Ultra Low Power Active Medical Implants (ULP-AMI) and related peripheral devices (ULP-AMI-P)"; Part 33: "Specific conditions for Ultra Wide Band (UWB) devices"; Part 34: "Specific conditions for External Power Supply (EPS) for mobile phones"; Part 35: "Specific requirements for Low Power Active Medical Implants (LP-AMI) operating in the 2 483,5 MHz to 2 500 MHz bands"; Part 50: "Specific conditions for Cellular Communication Base Station (BS), repeater and ancillary equipment"; Part 51: "Specific conditions for Automotive, Ground based Vehicles and Surveillance Radar Devices using 24,05 GHz to 24,25 GHz, 24,05 GHz to 24,5 GHz, 76 GHz to 77 GHz and 77 GHz to 81 GHz"; Part 52: "Specific conditions for Cellular Communication Mobile and portable radio and ancillary equipment"; Part 53: "Specific conditions for terrestrial sound broadcasting and digital TV broadcasting service transmitters and associated ancillary equipment"; Part 54: "Specific conditions for ground based aeronautical and meteorological radars". NOTE: Parts 7, 8, 10, 11, 14, 16, 18, 23, 24, 25, 26 and 32 of this multi-part deliverable have been removed from this listing as they do not cover the new Directive in force, Directive 2014/53/EU [i.1] and Directive 2014/30/EU [i.2].

ETSI Draft ETSI EN 301 489-1 V2.2.1 (2019-03)8 Proposed national transposition dates Date of latest announcement of this EN (doa): 3 months after ETSI publication Date of latest publication of new National Standard or endorsement of this EN (dop/e):

6 months after doa Date of withdrawal of any conflicting National Standard (dow): 18 months after doa

Modal verbs terminology In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and "cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). "must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation. Introduction Product dependent arrangements necessary to perform the EMC tests on dedicated types of radio communications equipment, and the assessment of test results, are detailed in the appropriate relevant radio technology parts of ETSI EN 301 489 series [i.13] details of which can be found in annex C of the present document. The environment classification used in the present document refers to the environment classification used in: • CENELEC EN 61000-6-3 [i.4] and CENELEC EN 61000-6-1 [i.5] for the residential, commercial and light industrial environment; or • CENELEC EN 61000-6-2 [i.15] and CENELEC EN 61000-6-4 [i.14] for the industrial environment; or • ETSI TR 101 651 [i.6] for the telecommunication centre environment; or • ISO 7637-2 [8] for the vehicular environment. The immunity requirements within the present document are derived from the generic immunity standard for the residential, commercial and light industrial environment. When it is required to evaluate the EMC performance of "combined radio and non-radio equipment", ETSI EG 203 367 [i.3] provides guidance upon the application of the various harmonised standards, including the present document, that could potentially apply to such equipment. oSIST prEN 301 489-1 V2.2.1:2019

ETSI Draft ETSI EN 301 489-1 V2.2.1 (2019-03)9 1 Scope The present document specifies methods of measurements and technical characteristics for radio equipment and associated ancillary equipment, excluding broadcast receivers, in respe