33.070.30 - Digital Enhanced Cordless Telecommunications (DECT)

The present document is one of the parts of the specification of the Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI).
This part of the DECT CI specifies the speech and audio coding and transmission requirements. In order to ensure satisfactory interworking of different portable and fixed units, it is necessary to specify the transmission performance of the analog information over the digital link. This requires not only use of a common speech algorithm, but also standa...view more

The present document is one of the parts of the specification of the Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI).
The present document specifies the security architecture, the types of cryptographic algorithms required, the way in which they are to be used, and the requirements for integrating the security features provided by the architecture into the DECT CI. It also describes how the features can be managed and how they relate to certain DECT fixed systems and l...view more

The present document is one of the parts of the specification of the Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI).
The present document specifies the Network (NWK) layer. The NWK layer is part 5 of the ETSI EN 300 175 and layer 3 of the DECT protocol stack. The present document only specifies the C-plane (control plane) of the DECT NWK layer. It contains no specification for the U-plane (user plane) because the U-plane is null for all services at the DECT NWK layer....view more

The present document specifies the tests applicable to all Digital Enhanced Cordless Telecommunications (DECT) equipment accessing any DECT frequency band (including applicable IMT-2000 frequency bands) and the tests applicable to DECT speech and audio transmission using any of the codecs and any of the audio specifications described in ETSI EN 300 175-8 [8]. The aims of the present document are to ensure:
• efficient use of frequency spectrum;
• no harm done to any connected network and its s...view more

The present document is one of the parts of the specification of the Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI).
The present document specifies the identities and addressing structure of the Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI). There are four categories of identities to be used for identification and addressing in a general DECT environment. These four categories are:
• Fixed Part (FP) identities;
• Portable Part (PP) identi...view more

The present document is one of the parts of the specification of the Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI). The present document specifies the Data Link Control (DLC) layer. The DLC layer is part 4 of the DECT CI standard and layer 2b of the DECT protocol stack. Two planes of operation are specified for this DLC (sub)layer. These planes are called the Control plane (C-plane) and the User plane (U-plane). The C-plane is mostly concerned with the DECT signalling...view more

The present document is one of the parts of the specification of the Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI).
The present document specifies the Medium Access Control (MAC) layer. The MAC layer is part 3 of the DECT Common Interface standard and layer 2a of the DECT protocol stack. It specifies three groups of MAC services:
• the broadcast message control service;
• the connectionless message control service; and
• the multi-bearer control service.
It also ...view more

The present document gives an introduction and overview of the complete Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI). The present document contains an abstract of the other parts of the DECT standard together with a general
description of:
• the objectives of the present document;
• the DECT Common Interface;
• the protocol architecture of DECT.
The present document also provides an extensive vocabulary; in particular it contains the common definitions of all th...view more

The present document is one of the parts of the specification of the Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI). The present document specifies the physical channel arrangements. DECT physical channels are radio communication paths between two radio end points. A radio end point is either part of the fixed infrastructure, a privately owned Fixed Part (FP), typically a base station, or a Portable Part (PP), typically a handset. The assignment of one or more particul...view more

The present document specifies technical characteristics and methods of measurements for Digital Enhanced Cordless
Telecommunications (DECT) equipment, and associated ancillary equipment.
The present document covers the essential requirements of article 3.1(b) of Directive 2014/53/EU [i.1] under the
conditions identified in annex A.
Technical specifications related to the antenna port and emissions from the enclosure port of the radio equipment are
not included in the present document.
NOT...view more

The present document defines the Digital Enhanced Cordless Telecommunications (DECT) Wireless Relay Station
(WRS). A WRS is an additional building block for the DECT fixed network.
The present document defines provisions needed for a controlled and reliable application of the DECT WRS
infrastructure building block.
The DECT WRS defined by the present document supports the DECT New Generation (NG-DECT) and DECT Ultra
Low Energy (ULE) profiles.

The present document specifies tests applicable to all Digital Enhanced Cordless Telecommunications (DECT)
equipment accessing the DECT frequency band 1 880 MHz to 1 900 MHz (including provisions for testing other or
extended frequency bands as described in ETSI EN 300 175-1 [i.11] and ETSI EN 300 175-2 [1]). Part 2 of the present
multi-part deliverable [i.15] specifies tests applicable to DECT speech and audio transmission using a collection of
speech codecs, including Recommendation ITU-T ...view more

The present document is one of the parts of the specification of the Digital Enhanced Cordless Telecommunications
(DECT) Common Interface (CI).
The present document specifies the physical channel arrangements. DECT physical channels are radio communication
paths between two radio end points. A radio end point is either part of the fixed infrastructure, a privately owned Fixed
Part (FP), typically a base station, or a Portable Part (PP), typically a handset. The assignment of one or more part...view more

The present document is one of the parts of the specification of the Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI).
The present document specifies the Network (NWK) layer. The NWK layer is part 5 of the ETSI EN 300 175 and layer 3 of the DECT protocol stack.
The present document only specifies the C-plane (control plane) of the DECT NWK layer. It contains no specification for the U-plane (user plane) because the U-plane is null for all services at the DECT NWK layer...view more

The present document is one of the parts of the specification of the Digital Enhanced Cordless Telecommunications
(DECT) Common Interface (CI).
The present document specifies the security architecture, the types of cryptographic algorithms required, the way in
which they are to be used, and the requirements for integrating the security features provided by the architecture into the
DECT CI. It also describes how the features can be managed and how they relate to certain DECT fixed systems an...view more

The present document is one of the parts of the specification of the Digital Enhanced Cordless Telecommunications
(DECT) Common Interface (CI).
This part of the DECT CI specifies the speech and audio coding and transmission requirements.
In order to ensure satisfactory interworking of different portable and fixed units, it is necessary to specify the
transmission performance of the analog information over the digital link. This requires not only use of a common
speech algorithm, but also st...view more

The present document is one of the parts of the specification of the Digital Enhanced Cordless Telecommunications
(DECT) Common Interface (CI).
The present document specifies the physical channel arrangements. DECT physical channels are radio communication
paths between two radio end points. A radio end point is either part of the fixed infrastructure, a privately owned Fixed
Part (FP), typically a base station, or a Portable Part (PP), typically a handset. The assignment of one or more part...view more

The present document is one of the parts of the specification of the Digital Enhanced Cordless Telecommunications
(DECT) Common Interface (CI).
The present document specifies the identities and addressing structure of the Digital Enhanced Cordless
Telecommunications (DECT) Common Interface (CI).
There are four categories of identities to be used for identification and addressing in a general DECT environment.
These four categories are:
• Fixed Part (FP) identities;
• Portable Part (PP) id...view more

The present document is one of the parts of the specification of the Digital Enhanced Cordless Telecommunications
(DECT) Common Interface (CI).
The present document specifies the Medium Access Control (MAC) layer. The MAC layer is part 3 of the DECT
Common Interface standard and layer 2a of the DECT protocol stack.
It specifies three groups of MAC services:
• the broadcast message control service;
• the connectionless message control service; and
• the multi-bearer control service.
It al...view more

The present document gives an introduction and overview of the complete Digital Enhanced Cordless
Telecommunications (DECT) Common Interface (CI).
The present document contains an abstract of the other parts of the DECT standard together with a general
description of:
• the objectives of the present document;
• the DECT Common Interface;
• the protocol architecture of DECT.
The present document also provides an extensive vocabulary; in particular it contains the common definitions of all ...view more