33.060.01 - Radiocommunications in general

REN/ERM-EMC-355

The present document specifies technical characteristics and methods of measurements for Broadband Data
Transmission System equipment including the associated ancillary equipment in respect of electromagnetic
compatibility, as detailed in table 1.
Technical specifications related to the antenna port and emissions from the enclosure port of the radio equipment are
not included in the present document. Such technical specifications are found in the relevant product standards for the
effective...view more

The present document defines an information model and protocol for multiradio interface for reconfigurable RE except
for reconfigurable mobile devices which are covered in [i.6] to [i.11]. The work is based on the Use Cases defined in
ETSI TR 103 585 [i.1], on the system requirements defined in ETSI EN 303 641 [1] and on the radio reconfiguration
related architecture for reconfigurable RE defined in ETSI EN 303 648 [i.2].
The present document is based on ETSI EN 303 146-1 [i.8] and provide a...view more

The scope of the present document is to define an information model and protocol for unified radio application interface
for radio equipment reconfiguration except for reconfigurable mobile devices which are covered in [i.6] to [i.11]. The
work is based on the Use Cases defined in ETSI TR 103 585 [i.1], on the system requirements defined in ETSI
EN 303 641 [1] and on the radio reconfiguration related architecture for reconfigurable RE defined in ETSI
EN 303 648 [i.2].
The present document w...view more

The scope of the present document is to define the generalized Radio Programming Interface (gRPI) for radio
equipment reconfiguration except for reconfigurable mobile devices which are covered in [i.4] to [i.9]. The work is
based on the Use Cases defined in ETSI TR 103 585 [i.1], on the system requirements defined in ETSI EN 303 641 [1]
and on the radio reconfiguration related architecture for radio equipment defined in ETSI EN 303 648 [i.2].
The present document will be based on ETSI EN 303...view more

The present document defines an information model and protocol for generalized reconfigurable radio frequency
interface for reconfigurable REs except for reconfigurable mobile devices which are covered in [i.7] to [i.12]. The work
is based on the Use Cases defined in ETSI TR 103 585 [i.1], on the system requirements defined in ETSI
EN 303 641 [1] and on the radio reconfiguration related architecture for reconfigurable RE defined in ETSI
EN 303 648 [i.2].
The present document will be based o...view more

The scope of the present document is to define the radio reconfiguration related architecture for reconfigurable Radio
Equipment except for reconfigurable mobile devices which are covered in ETSI EN 303 095 [i.4], ETSI
EN 302 969 [i.9] to ETSI EN 303 146-4 [i.13]. The work is based on the system requirements defined in ETSI
EN 303 641 [1] and the Use Cases defined in ETSI TR 103 062 [i.1], ETSI TR 102 944 [i.2], ETSI TR 103 585 [i.3].

The scope of the present document is to define the high level system requirements for reconfigurable Radio Equipment
enabling the provision of Radio Applications except for reconfigurable mobile devices which are covered in ETSI
EN 302 969 [i.4], ETSI EN 303 095 [i.5], ETSI EN 303 146 parts 1 [i.6] to 4 [i.9]. The work is based on the Use Cases
defined in ETSI TR 103 062 [i.1], ETSI TR 102 944 [i.2], ETSI TR 103 585 [i.3] and ETSI EN 302 969 [i.4].

To produce a Harmonised Standard under article 3.2 of the R&TTE Directive, taking into account the ECC Report 206 to support Wireless industrial automation devices within the 5,725 GHz to 5,875 GHz frequency range. Equipment related to the EN is described in TR 102 889-2.

The present document specifies methods of measurements and technical characteristics for radio equipment and associated ancillary equipment, excluding broadcast receivers, in respect of ElectroMagnetic Compatibility (EMC). Technical specifications related to the antenna port of radio equipment and radiated emissions from the enclosure port of radio equipment and combinations of radio and ancillary equipment are not included in the present document. Such technical specifications are normally foun...view more

The present document defines requirements in respect of ElectroMagnetic Compatibility (EMC) for combined and/or
integrated equipment intended to be used within residential, commercial and light industry locations.
The present document is only applicable to combined and/or integrated equipment where the radio function is within the
scope of one or more of the standards listed in clause 2.1.2 (covering references [1] to [7]) and where the non-radio
function is within the scope of one or more o...view more

The present document defines requirements in respect of ElectroMagnetic Compatibility (EMC) for combined and/or
integrated equipment intended to be used within industrial locations.
The present document is only applicable to combined and/or integrated equipment where the radio function is within the
scope of one or more of the standards listed in clause 2.1.2 (covering references [1] to [8]) and where the non-radio
function is within the scope of one or more of the standards listed in clause...view more

The present document, together with ETSI EN 301 489-1 [1], covers the assessment of Receive Only Mobile Earth
Stations (ROMES) and GNSS receivers operating in the RNSS band (ROGNSS), as defined in annex B, and associated
ancillary equipment in respect of ElectroMagnetic Compatibility (EMC).
Technical specifications related to the antenna port and emissions from the enclosure port of ROMES are not included
in the present document. Such technical specifications are found in the relevant produc...view more

The present document, together with ETSI EN 301 489-1 [1], covers the assessment of wireless microphones, similar
RF audio link equipment, cordless audio, including low power Band II transmitters and in-ear monitoring, intended for
the transmission of music and speech, and associated ancillary equipment, in respect of ElectroMagnetic Compatibility
(EMC).
Technical specifications related to the antenna port and emissions from the enclosure port of wireless microphones,
similar RF audio link ...view more

The present document specifies technical characteristics and methods of measurements for Digital Enhanced Cordless
Telecommunications (DECT) equipment, and associated ancillary equipment.
The present document covers the essential requirements of article 3.1(b) of Directive 2014/53/EU [i.1] under the
conditions identified in annex A.
Technical specifications related to the antenna port and emissions from the enclosure port of the radio equipment are
not included in the present document.
NOT...view more

The present document specifies technical characteristics and methods of measurements for equipment the following
equipment types:
1) digital cellular base station equipment;
2) repeaters;
3) associated ancillary equipment.
Including individually and combinations of:
• UTRA, WCDMA (IMT-2000 Direct Spread, W-CDMA, UMTS);
• E-UTRA, LTE (IMT-2000 and IMT advanced);
• GSM (IMT-2000 SC, Technology GSM/EDGE);
• MSR (IMT-2000 and IMT advanced, combination of technologies above);
• OFDMA WMAN (...view more

The present document, together with ETSI EN 301 489-1 [1], covers the assessment of Private land Mobile Radio
(PMR) and associated ancillary equipment, in respect of ElectroMagnetic Compatibility (EMC).
The present document covers both analogue and digital Private land Mobile Radio (PMR) equipment.
Technical specifications related to the antenna port and emissions from the enclosure port of Private land Mobile Radio
(PMR) equipment are not included in the present document. Such technical spe...view more

The present document, together with ETSI EN 301 489-1 [1], covers the assessment of Mobile Earth Stations (MES) as
defined in annex B used within Satellite radio services, and ancillary equipment in respect of ElectroMagnetic
Compatibility (EMC).
Technical specifications related to the antenna port and emissions from the enclosure port of the equipment are not
included in the present document. Such technical specifications are found in the relevant product standards for the
effective use of...view more