SIST EN 301 489-6 V2.2.1:2019

SLOVENSKI STANDARD
SIST EN 301 489-6 V2.2.1:2019
01-junij-2019
6WDQGDUGHOHNWURPDJQHWQH]GUXåOMLYRVWL(0&]DUDGLMVNRRSUHPRLQVWRULWYH

GHO3RVHEQLSRJRML]DRSUHPRGLJLWDOQLKL]EROMãDQLKEUH]YUYLþQLKWHOHNRPXQLNDFLM

'(&7+DUPRQL]LUDQLVWDQGDUGNL]DMHPDELVWYHQH]DKWHYHþOHQDEGLUHNWLYH

ElectroMagnetic Compatibility (EMC) standard for radio equipment and services - Part 6:

equipment - Harmonised Standard covering the essential requirements of article 3.1(b) of

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

The present document may be made available in electronic versions and/or in print. The content of any electronic and/or

print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any

existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI

deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.

Users of the present document should be aware that the document may be subject to revision or change of status.

Information on the current status of this and other ETSI documents is available at

If you find errors in the present document, please send your comment to one of the following services:

No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying

The content of the PDF version shall not be modified without the written authorization of ETSI.

DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.

3GPP and LTE are trademarks of ETSI registered for the benefit of its Members and

oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and

Intellectual Property Rights ................................................................................................................................ 5

Foreword ............................................................................................................................................................. 5

Modal verbs terminology .................................................................................................................................... 5

1 Scope ........................................................................................................................................................ 6

2 References ................................................................................................................................................ 6

2.1 Normative references ......................................................................................................................................... 6

2.2 Informative references ........................................................................................................................................ 7

3 Definitions and abbreviations ................................................................................................................... 7

3.1 Definitions .......................................................................................................................................................... 7

3.2 Abbreviations ..................................................................................................................................................... 7

4 Test conditions ......................................................................................................................................... 8

4.1 General ............................................................................................................................................................... 8

4.2 Arrangements for test signals ............................................................................................................................. 8

4.2.1 Arrangements for test signals at the input of transmitters ............................................................................. 8

4.2.1.0 General .................................................................................................................................................... 8

4.2.1.1 Speech equipment ................................................................................................................................... 8

4.2.1.2 Non-speech equipment ............................................................................................................................ 8

4.2.2 Arrangements for test signals at the output of transmitters ........................................................................... 8

4.2.3 Arrangements for test signals at the input of receivers ................................................................................. 9

4.2.4 Arrangements for test signals at the output of receivers ............................................................................... 9

4.2.5 Arrangements for testing transmitter and receiver together (as a system) .................................................... 9

4.3 RF exclusion band of radio communications equipment.................................................................................... 9

4.3.1 Introduction................................................................................................................................................... 9

4.3.2 Exclusion band for transmitters or the transmitter part of transceivers......................................................... 9

4.3.2.1 General .................................................................................................................................................... 9

4.3.2.2 Channelized Systems .............................................................................................................................. 9

4.3.3 Exclusion band for receivers or the receiver part of transceivers ................................................................. 9

4.4 Narrow band responses on receivers or receivers which are part of transceivers ............................................. 10

4.5 Normal test modulation .................................................................................................................................... 10

5 Performance assessment ......................................................................................................................... 10

5.1 General ............................................................................................................................................................. 10

5.2 Arrangements for the assessment of host dependant equipment and plug-in cards .......................................... 10

5.2.0 Two alternative approaches ........................................................................................................................ 10

5.2.1 Alternative A: composite equipment .......................................................................................................... 11

5.2.2 Alternative B: use of a test jig and three hosts ............................................................................................ 11

5.3 Assessment procedures ..................................................................................................................................... 11

5.3.1 Loss of user control functions or stored user defined data .......................................................................... 11

5.3.2 Audio breakthrough .................................................................................................................................... 11

5.4 Ancillary equipment ......................................................................................................................................... 12

5.5 Equipment classification .................................................................................................................................. 13

6 Performance criteria ............................................................................................................................... 13

6.1 General ............................................................................................................................................................. 13

6.2 Performance criteria for Continuous phenomena of Transceivers (CT) ........................................................... 13

6.3 Performance criteria for Transient phenomena applied to Transceivers (TT) .................................................. 13

6.4 Performance criteria for Continuous phenomena applied to Receive-only equipment (CR) ........................... 14

6.5 Performance criteria for Transient phenomena applied to Receive-only equipment (TR) ............................... 14

6.6 Performance criteria for ancillary equipment tested on a standalone basis ...................................................... 14

7 Applicability overview ........................................................................................................................... 14

7.1 Emission ........................................................................................................................................................... 14

7.1.1 General ........................................................................................................................................................ 14

7.1.2 Special conditions ....................................................................................................................................... 14

7.2 Immunity .......................................................................................................................................................... 14

7.2.1 General ........................................................................................................................................................ 14

7.2.2 Special conditions ....................................................................................................................................... 15

8 Methods of measurement and limits for EMC emissions ...................................................................... 15

9 Test methods and levels for immunity tests ........................................................................................... 15

9.1 Test configuration............................................................................................................................................. 15

9.2 Radio frequency electromagnetic field (80 MHz to 6 000 MHz) ..................................................................... 15

9.2.1 General ........................................................................................................................................................ 15

9.2.2 Test method ................................................................................................................................................ 15

9.2.3 Performance criteria .................................................................................................................................... 15

Annex A (informative): Relationship between the present document and the essential

requirements of Directive 2014/53/EU ......................................................... 16

Annex B (normative): Definitions of cordless telecommunications equipment in the scope of

the present document ..................................................................................... 18

B.1 Digital Enhanced Cordless Telecommunications (DECT) equipment ................................................... 18

Annex C (informative): Bibliography ................................................................................................... 19

Annex D (informative): Change history ............................................................................................... 20

History .............................................................................................................................................................. 21

IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information

pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found

in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in

respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web

Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee

can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web

The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.

ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no

right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does

not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.

This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic

The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.2] to

provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation

of the laws of the Member States relating to the making available on the market of radio equipment and repealing

Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with

the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present

document, a presumption of conformity with the corresponding essential requirements of that Directive and associated

The present document is part 6 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].

In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and

"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of

"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.

The present document specifies technical characteristics and methods of measurements for Digital Enhanced Cordless

The present document covers the essential requirements of article 3.1(b) of Directive 2014/53/EU [i.1] under the

Technical specifications related to the antenna port and emissions from the enclosure port of the radio equipment are

NOTE: Such technical specifications are found in the relevant product standards for the effective use of the radio

In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present

document and ETSI EN 301 489-1 [1], the provisions of the present document take precedence.

The environmental classification and the emission and immunity requirements used in the present document are as

stated in ETSI EN 301 489-1 [1], except for any special conditions included in the present document.

References are specific, identified by date of publication and/or edition number or version number. Only the cited

Referenced documents which are not found to be publicly available in the expected location might be found at

NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee

The following referenced documents are necessary for the application of the present document.

[1] ETSI EN 301 489-1 (V2.2.0) (03-2017): "ElectroMagnetic Compatibility (EMC) standard for

radio equipment and services; Part 1: Common technical requirements; Harmonised Standard

covering the essential requirements of article 3.1(b) of Directive 2014/53/EU and the essential

[2] Recommendation ITU-T O.153 (10-1992): "Basic parameters for the measurement of error

[3] ETSI EN 300 175-2 (V2.6.1) (07-2015): "Digital Enhanced Cordless Telecommunications

[4] ETSI EN 300 175-3 (V2.6.1) (07-2015): "Digital Enhanced Cordless Telecommunications

[5] ETSI EN 300 176-1 (V2.2.1) (10-2015): "Digital Enhanced Cordless Telecommunications

[6] CENELEC EN 61000-4-3 (2006), A1 (2008) and A2 (2010): "Electromagnetic compatibility

(EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency,

References are either specific (identified by date of publication and/or edition number or version number) or

non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the

NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee

The following referenced documents are not necessary for the application of the present document but they assist the

[i.1] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the

harmonisation of the laws of the Member States relating to the making available on the market of

[i.2] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request

to the European Committee for Electrotechnical Standardisation and to the European

Telecommunications Standards Institute as regards radio equipment in support of Directive

[i.3] CENELEC EN 55024 (2010): "Information technology equipment - Immunity characteristics -

[i.4] ETSI EN 301 406 (V2.2.2) (06-2016): "Digital Enhanced Cordless Telecommunications (DECT);

Harmonised Standard covering the essential requirements of article 3.2 of the Directive

For the purposes of the present document, the terms and definitions given in ETSI EN 301 489-1 [1] and the following

bearer: burst of the wanted RF signal used to establish and maintain the communications link for digital modulated and

DECT equipment: Digital Enhanced Cordless Telecommunications (DECT) apparatus which includes one or more

transceivers and/or receivers and/or parts thereof which conform to the requirements of ETSI EN 300 175-2 [3]

host equipment: any equipment which has a complete user functionality when not connected to the cordless telephone

or similar radio communications equipment, and to which this radio equipment provides additional functionality, and to

which connection is necessary for this radio equipment to offer functionality, and in which the transceiver part of the

non-speech equipment: cordless telephone or similar communications equipment intended for the provision and

reception of digital data either originating from or destined to external digital speech processing circuitry or other

speech equipment: cordless telephone or similar communications equipment containing transducers such as

microphones and/or loudspeakers intended for the provision and reception of acoustic audio signals

CR Continuous phenomena applied to cordless telephone or communication Receive-only equipment

CT Continuous phenomena applied to cordless telephone or communication Transceivers

TR Transient phenomena applied to cordless telephone or communication Receive-only equipment

TT Transient phenomena applied to cordless telephone or communication Transceivers

For the purposes of the present document, the test conditions of ETSI EN 301 489-1 [1], clause 4, shall apply as

appropriate. Further product related test conditions for cordless telephone or communication equipment are specified in

The provisions of ETSI EN 301 489-1 [1], clause 4.2.1 shall apply with the following modification.

The transmitter part of the particular type of cordless telephone or communications equipment shall be modulated with

Audio input signals may be provided to the EUT either by a non-metallic acoustic tube or, if provided, electrical

connections. The equipment shall not be modified to provide any electrical connection ports for the purposes of EMC

tests only. Suitable test arrangements for the acoustic tube are described in CENELEC EN 55024 [i.3], annex A.

Digital (data) input signals shall be supplied to the EUT by electrical connection to the modulation input port via an

appropriate connecting cable, test jig, or host equipment (see clauses 5.2.1 and 5.2.2).

The receiver part or standalone receiver of the particular type of cordless telephone or communications equipment shall

be provided with the appropriate wanted RF signal modulated as specified for that type of equipment (see clause 4.5).

The normal test modulation shall be transmitted by the test system and looped back in the radio equipment, as described

in ETSI EN 300 175-3 [4] clause 7 and clause 12 and ETSI EN 300 176-1 [5] clause 13. Further, the output of the radio

The relevant requirements are based on DECT technology and not on additional technical capabilities of the DECT

equipment. The exclusion band for transmitters is directly related to the emissions due to transmitter transient

requirement of the DECT system. The relevant requirements and details are found in the harmonised standard ETSI

Because the used channel cannot be fixed or predicted during measurements, the transmitter exclusion bands have to be

The exclusion band shall be from 1 874,016 MHz to 1 905,320 MHz (+7,776 MHz from the carrier close to the upper

band edge and -7,776 MHz from the carrier close to the lower band edge of the allocated band).

NOTE: The value of 7,776 MHz above is derived using the formula in clause 4.3.3.1 of ETSI EN 301 489-1 [1]

The exclusion band for receivers and receiver sections of transceivers is the band of frequencies over which no

The following requirements are based on the measurement procedure and the DECT technology but not on additional

• The exclusion band shall be from 1 829 MHz to 1 951 MHz (+51 MHz from the upper band edge

NOTE: The value of 51 MHz above is caused by channel independent effects, so the receiver exclusion band is

based on the band edge frequencies. Because of the equipment used to perform the measurement in ETSI

EN 301 406 [i.4], clause 4.5.7.4, a handover (change of channel and/or timeslot) is not possible a

The provision of ETSI EN 301 489-1 [1], clause 4.4 shall apply with the following modifications.