SIST EN 301 489-19 V1.2.1:2003

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Elektromagnetna združljivost (EMC) in zadeve v zvezi z radijskim spektrom (ERM) - Standard elektromagnetne združljivosti (EMC) za radijsko opremo in storitve - 19. del: Posebni pogoji za sprejemne mobilne zemeljske postaje (ROMES), ki zagotavljajo podatkovne komunikacije in delujejo v pasu 1,5 GHzElectromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 19: Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band providing data communications33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.070.40SatelitSatellite33.060.01Radijske komunikacije na splošnoRadiocommunications in generalICS:Ta slovenski standard je istoveten z:EN 301 489-19 Version 1.2.1SIST EN 301 489-19 V1.2.1:2003en01-marec-2003SIST EN 301 489-19 V1.2.1:2003SLOVENSKI

ETSI EN 301 489-19 V1.2.1 (2002-11)Candidate Harmonized European Standard (Telecommunications series) Electromagnetic compatibilityand Radio spectrum Matters (ERM);ElectroMagnetic Compatibility (EMC) standardfor radio equipment and services;Part 19: Specific conditions for Receive Only MobileEarth Stations (ROMES) operating in the 1,5 GHz bandproviding data communications

Reference REN/ERM-EMC-230-19 Keywords data, earth station, EMC, mobile, MSS, radio, receiver, regulation, satellite, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE

Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88

Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editor@etsi.org Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.

DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. SIST EN 301 489-19 V1.2.1:2003

Contents Intellectual Property Rights................................................................................................................................4 Foreword.............................................................................................................................................................4 1 Scope........................................................................................................................................................5 2 References................................................................................................................................................5 3 Definitions and abbreviations...................................................................................................................6 3.1 Definitions..........................................................................................................................................................6 3.2 Abbreviations.....................................................................................................................................................6 4 Test conditions.........................................................................................................................................6 4.1 General...............................................................................................................................................................6 4.2 Arrangements for test signals.............................................................................................................................6 4.2.1 Arrangements for test signals at the input of receivers (ROMES)................................................................6 4.2.2 Arrangements for test signals at the output of receivers (ROMES)..............................................................7 4.3 Exclusion bands..................................................................................................................................................7 4.3.1 Receiver exclusion band...............................................................................................................................7 4.4 Narrow band responses of receivers...................................................................................................................7 4.5 Normal test modulation......................................................................................................................................7 5 Performance assessment...........................................................................................................................7 5.1 General...............................................................................................................................................................7 5.2 Equipment which can provide a continuous communications link....................................................................8 5.3 Equipment which does not provide a continuous communications link.............................................................8 5.4 Ancillary equipment...........................................................................................................................................8 5.5 Equipment classification....................................................................................................................................8 6 Performance criteria.................................................................................................................................8 6.1 General performance criteria..............................................................................................................................8 6.2 Performance criteria for Continuous phenomena applied to ROMES receivers (CR).......................................8 6.3 Performance criteria for Transient phenomena applied to ROMES receivers (TR)...........................................9 6.4 Performance criteria for equipment which does not provide a continuous communication link........................9 7 Applicability overview.............................................................................................................................9 7.1 Emission.............................................................................................................................................................9 7.1.1 General..........................................................................................................................................................9 7.1.2 Special conditions.........................................................................................................................................9 7.2 Immunity..........................................................................................................................................................10 7.2.1 General........................................................................................................................................................10 7.2.2 Special conditions.......................................................................................................................................10 Annex A (normative): Definitions of ROMES within the scope of the present document............11 A.1 Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band...................................11 Annex B (informative): Bibliography...................................................................................................12 History..............................................................................................................................................................13

Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Candidate Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/34/EC (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations. The present document is intended to become a Harmonized Standard, the reference of which will be published in the Official Journal of the European Communities referencing the Council Directive on the approximation of the laws of the Member States relating to electromagnetic compatibility ("the EMC Directive") (89/336/EEC [3] as amended) and Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity ("the R&TTE Directive" [2]). The present document is part 19 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].

National transposition dates Date of adoption of this EN: 8 November 2002 Date of latest announcement of this EN (doa): 28 February 2003 Date of latest publication of new National Standard or endorsement of this EN (dop/e):

31 August 2003 Date of withdrawal of any conflicting National Standard (dow): 28 February 2006

1 Scope The present document, together with EN 301 489-1 [1], covers the assessment of Receive Only Mobile Earth Stations (ROMES), as defined in annex A, and associated ancillary equipment in respect of ElectroMagnetic Compatibility (EMC). Technical specifications related to the antenna port and emissions from the enclosure port of ROMES are not included in the present document. Such technical specifications are found in the relevant product standards for the effective use of the radio spectrum. The present document specifies the applicable test conditions, performance assessment and performance criteria for ROMES and associated ancillary equipment. ROMESs can have several configurations, including: - portable equipment; - fixed equipment; - a number of modules including a display/control interface to the user. The performance criteria used in the present document require that the satellite communications system of which the ROMES is a part provides reliable delivery of data or messages. In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present document and EN 301 489-1 [1], the provisions of the present document take precedence. The environmental classification and the emission and immunity requirements used in the present document are as stated in EN 301 489-1 [1], except for any special conditions included in the present document. The applicable environments referred to in EN 301 489-1 [1] where ROMES may be used shall be declared by the manufacturer.

2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. • References are either specific (identified by date of publication and/or edition number or version number) or non-spec