SIST EN 300 386 V1.4.1:2008

SLOVENSKI STANDARD
SIST EN 300 386 V1.4.1:2008
01-september-2008
Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) -
Oprema za telekomunikacijsko omrežje - Zahteve za elektromagnetno združljivost
(EMC)

Electromagnetic compatibility and Radio spectrum Matters (ERM) - Telecommunication

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

The present document may be made available in more than one electronic version or in print. In any case of existing or

perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).

In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive

Users of the present document should be aware that the document may be subject to revision or change of status.

Information on the current status of this and other ETSI documents is available at

If you find errors in the present document, please send your comment to one of the following services:

DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered

3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.

Intellectual Property Rights................................................................................................................................6

Foreword.............................................................................................................................................................6

1 Scope........................................................................................................................................................7

2 References................................................................................................................................................8

2.1 Normative references.........................................................................................................................................9

2.2 Informative references......................................................................................................................................10

3 Definitions and abbreviations.................................................................................................................12

3.1 Definitions........................................................................................................................................................12

3.2 Abbreviations...................................................................................................................................................14

4 Installation environment.........................................................................................................................14

5 Immunity: test methods..........................................................................................................................15

5.1 Electrostatic discharge......................................................................................................................................15

5.2 Electrical fast transients/burst...........................................................................................................................15

5.3 Surges...............................................................................................................................................................15

5.3.1 Signal line ports ..........................................................................................................................................15

5.3.2 AC power ports...........................................................................................................................................15

5.4 Immunity to continuous conducted signals ......................................................................................................16

5.4.1 Low frequency ( ≤ 150 kHz)........................................................................................................................16

5.4.2 Radio frequency (> 150 kHz) .....................................................................................................................16

5.4.2.1 AC power port.......................................................................................................................................16

5.4.2.2 DC power port.......................................................................................................................................16

5.4.2.3 Signal line port......................................................................................................................................16

5.5 Immunity to radiated electromagnetic fields ....................................................................................................16

5.6 Immunity to power supply disturbances: AC and DC power ports..................................................................16

5.6.1 Test of immunity to low frequency disturbances: AC power ports ............................................................16

5.6.2 Test of immunity to low frequency disturbances: DC power ports ............................................................16

6 Emission: test methods...........................................................................................................................17

6.1 AC power port..................................................................................................................................................17

6.2 DC power port..................................................................................................................................................17

6.3 Telecommunication Port..................................................................................................................................17

6.4 Radiated emission.............................................................................................................................................17

7 Test levels and limits..............................................................................................................................18

7.1 Emission...........................................................................................................................................................18

7.1.1 Enclosure port, Radiated electromagnetic field emissions..........................................................................18

7.1.2 AC ports......................................................................................................................................................18

7.1.2.1 Conducted emissions.............................................................................................................................18

7.1.2.2 Current harmonics.................................................................................................................................18

7.1.2.3 Voltage fluctuations..............................................................................................................................18

7.1.3 DC ports, Conducted emissions..................................................................................................................18

7.1.4 Telecommunication ports,; Conducted emissions.......................................................................................18

7.2 Immunity..........................................................................................................................................................19

7.2.1 Equipment operating in telecommunication centres ...................................................................................19

7.2.1.1 Telecommunication centres, enclosure port..........................................................................................19

7.2.1.2 Telecommunication centres, ports for outdoor signal lines...................................................................20

7.2.1.3 Telecommunication centres, ports for indoor signal lines.....................................................................21

7.2.1.4 Telecommunication centres, AC power ports .......................................................................................22

7.2.1.5 Telecommunication centres, DC power ports .......................................................................................22

7.2.2 Equipment operating in locations other than telecommunication centres...................................................23

7.2.2.1 Other than telecommunication centres, enclosure port .........................................................................23

7.2.2.2 Other than telecommunication centres, ports for outdoor signal lines ..................................................24

7.2.2.3 Other than telecommunication centres, ports for indoor signal lines ....................................................25

7.2.2.4 Other than telecommunication centres, AC power ports.......................................................................26

7.2.2.5 Other than telecommunication centres, DC power ports.......................................................................27

8 General test configuration ......................................................................................................................28

9 General operational conditions during testing........................................................................................28

9.1 Equipment configuration..................................................................................................................................28

9.2 Operation of multimedia network equipment...................................................................................................29

10 General immunity conditions .................................................................................................................29

10.1 General performance criteria............................................................................................................................29

11 Switching equipment specific requirements...........................................................................................30

11.1 Test configuration.............................................................................................................................................30

11.2 Operational conditions.....................................................................................................................................31

11.2.1 Emission.....................................................................................................................................................32

11.2.2 Immunity....................................................................................................................................................32

11.3 Specific immunity performance criteria...........................................................................................................32

11.3.1 Digital port performance criteria ................................................................................................................32

11.3.1.1 Performance criterion A (continuous phenomena)................................................................................32

11.3.1.2 Performance criterion B (transient phenomena)....................................................................................32

11.3.1.3 Performance criterion C (interruptions) ................................................................................................32

11.3.2 Analogue port performance criteria ............................................................................................................33

11.3.2.1 Performance criterion A (continuous phenomena)................................................................................33

11.3.2.2 Performance criterion B (transient phenomena)....................................................................................33

11.3.2.3 Performance criterion C (interruptions) ................................................................................................33

12 Transmission equipment specific requirements .....................................................................................33

12.1 Test configuration.............................................................................................................................................33

12.2 Operational conditions.....................................................................................................................................34

12.2.1 Emission.....................................................................................................................................................34

12.2.2 Immunity....................................................................................................................................................34

12.3 Specific immunity performance criteria...........................................................................................................34

12.3.1 Digital signal ports......................................................................................................................................34

12.3.1.1 Performance criterion A (continuous phenomena)................................................................................35

12.3.1.2 Performance criterion B (transient phenomena)....................................................................................35

12.3.1.3 Performance criterion C (interruptions) ................................................................................................35

12.3.2 Analogue voice frequency signal ports.......................................................................................................35

12.3.2.1 Performance criterion A (continuous phenomena)................................................................................35

12.3.2.2 Performance criterion B (transient phenomena)....................................................................................35

12.3.3 SDH and PDH interfaces ............................................................................................................................35

12.3.3.1 Tributary and aggregate interfaces........................................................................................................35

12.3.4 ISDN interfaces..........................................................................................................................................36

12.3.4.1 Primary rate access ISDN interfaces.....................................................................................................36

12.3.4.2 Network termination NT1 for ISDN "U" interfaces..............................................................................36

12.3.4.3 Basic access ISDN interfaces................................................................................................................36

12.3.5 Analogue interfaces....................................................................................................................................36

12.3.5.1 Trunk interfaces and leased line interfaces ...........................................................................................36

12.3.5.2 Subscriber interfaces.............................................................................................................................36

12.3.6 V.10, V.11, V.24, V.28, V.36, X.24 and similar V.- and X.- series interfaces ...........................................36

12.3.7 Ethernet and packet-data interfaces ............................................................................................................36

12.3.7.1 Performance criterion A (continuous phenomena)................................................................................36

12.3.7.2 Performance criterion B (transient phenomena)....................................................................................36

12.3.8 Service and maintenance interfaces ............................................................................................................36

12.3.9 Synchronization interfaces..........................................................................................................................37

12.3.9.1 Performance criterion A (continuous phenomena)................................................................................37

12.3.9.2 Performance criterion B (transient phenomena)....................................................................................37

12.3.10 Remote alarm interfaces .............................................................................................................................37

12.3.10.1 Performance criterion A (continuous phenomena)................................................................................37

12.3.10.2 Performance criterion B (transient phenomena)....................................................................................37

12.4 Digital Subscriber Line (DSL) Access Systems...............................................................................................37

12.4.1 Test configuration.......................................................................................................................................37

12.4.2 Operational conditions................................................................................................................................38

12.4.3 Immunity....................................................................................................................................................38

12.4.4 Specific Immunity performance criteria .....................................................................................................38

12.4.4.1 Performance Criteria A (continuous phenomena).................................................................................39

12.4.4.2 Performance Criteria B (transient phenomena).....................................................................................39

12.4.4.3 Performance Criteria C (interruptions)..................................................................................................39

13 Power supply equipment specific conditions .........................................................................................39

13.1 Test configuration.............................................................................................................................................39

13.2 Operational conditions.....................................................................................................................................40

13.2.1 Emission.....................................................................................................................................................40

13.2.2 Immunity....................................................................................................................................................40

13.3 Specific immunity performance criteria...........................................................................................................41

13.3.1 Alternating current secondary interface......................................................................................................41

13.3.1.1 Performance criterion A (continuous phenomena)................................................................................41

13.3.1.2 Performance criterion B (transient phenomena)....................................................................................41

13.3.2 Direct current secondary interface ..............................................................................................................42

13.3.2.1 Performance criterion A (continuous phenomena)................................................................................42

13.3.2.2 Performance criterion B (transient phenomena)....................................................................................42

13.3.3 Control/signal interface...............................................................................................................................42

13.3.4 Tertiary supply interface.............................................................................................................................42

14 Supervisory equipment specific conditions............................................................................................42

14.1 Test configuration.............................................................................................................................................42

14.2 Operational conditions.....................................................................................................................................43

14.3 Specific immunity performance criteria...........................................................................................................43

14.3.1 Performance criterion A (continuous phenomena) .....................................................................................43

14.3.2 Performance criterion B (transient phenomena) .........................................................................................43

Annex A (normative): Surges: test method for ports of signal lines remaining within the

building ...........................................................................................................44

A.1 Test set-up for signal ports .....................................................................................................................44

Annex B (informative): Evaluation of test results ...............................................................................46

multimedia network equipment ...................................................................48

Annex D (informative): The EN title in the official languages ...........................................................49

Annex E (informative): Bibliography...................................................................................................50

History ..............................................................................................................................................................51

IPRs essential or potentially essential to the present document may have been declared to ETSI. The information

pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found

in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in

respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web

Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee

can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web

This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee

The present document has been produced by ETSI in response to a mandate from the European Commission issued

under Council Directive 98/34/EC [51] (as amended) laying down a procedure for the provision of information in the

The present document is intended to become a Harmonized Standard, the reference of which will be published in the

Official Journal of the European Communities referencing the Council Directive on the approximation of the laws of

the Member States relating to electromagnetic compatibility ("the EMC Directive") (89/336/EEC [49] as amended and

The present document covers the EMC requirements for non-radio equipment intended to be used within a public

telecommunications network, which provides telecommunications between Network Termination Points (NTPs)

(i.e. excluding terminal equipment beyond the NTPs). Examples of such equipment are:

• Non-radio transmission equipment and ancillary equipment. Such equipment includes:

but excludes equipment which is uniquely associated with or integrated in other equipment.

The function of supervision may either be performed by independent equipment or form part of other

telecommunication network equipment. If the function of supervision forms part of a telecommunication network

equipment, the performance may be evaluated simultaneously with other functions (such as switching and transmission)

The environmental classification locations used in the present document refers to TR 101 651 [50].

The requirements of the present document have been selected to ensure an adequate level of immunity for the apparatus

covered by the scope of the present document. The levels do not, however, cover extreme cases which may occur at any

location but with a low probability of occurrence. In special cases, situations may arise where the levels of disturbance

may exceed the immunity test levels specified in the present document. In these instances, special mitigation measures