EN-IEC 60730-2-22  applies to the partial evaluation of thermal motor protectors asdefined in IEC 60730-1 for household and similar use, including heating, air conditioning andsimilar applications as well as for sealed (hermetic and semi-hermetic type) motorcompressors.NOTE A thermal motor protector is considered an integrated control since its protective functionality isdependent on the correct mounting and fixing in or on a motor and which can only be fully tested in combinationwith the releva...view more

    • sale 10% off
    • Standard
      31 pages
      English language
    • e-Library read for
      1 day

IEC 60730-2-22:2014 applies to the partial evaluation of thermal motor protectors as defined in IEC 60730-1 for household and similar use, including heating, air conditioning and similar applications as well as for sealed (hermetic and semi-hermetic type) motor-compressors. A thermal motor protector is considered an integrated control since its protective functionality is dependent on the correct mounting and fixing in or on a motor and which can only be fully tested in combination with the rele...view more

    • sale 10% off
    • Standard
      31 pages
      English language
    • e-Library read for
      1 day

This part of IEC 61869 is a product family standard applicable to instrument transformers with
digital output. The product standard is composed of IEC 61869-1 and IEC 61869-6, in addition
to this standard and the relevant product specific standards in the IEC 61869 series (Part 7,
Part 8, Part 12, Part 13, Part 14, and Part 15).
This standard defines requirements for digital communications of instrument transformer
measurements. It is based on the IEC 61850 series, UCA international users g...
view more

    • sale 10% off
    • Standard
      64 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      64 pages
      English language
    • e-Library read for
      1 day

IEC 60730-2-14:2017 applies to electric actuators for use in, on, or in association with equipment for household and similar use. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof. This International Standard is applicable to controls for building automation within the scope of ISO 16484. This part 2-14 also applies to automatic electrical controls for equipment that may be used by the public, such as equipment intended to be used in sh...view more

    • sale 10% off
    • Standard
      24 pages
      English language
    • e-Library read for
      1 day

IEC 61869-15:2018 provides all requirements specific to voltage transformers to be used in DC applications (DCVTs), whatever the technology used. The output signal can be analogue or digital. It is applicable to newly manufactured voltage transformers used for measuring, protection and/or control applications in DC power systems with a rated voltage above 1,5 kV. This document covers passive voltage dividers as well as active voltage transformers, used for measurement, control and protection. Th...view more

    • sale 10% off
    • Standard
      38 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      38 pages
      English language
    • e-Library read for
      1 day

IEC 61869-14:2018 provides all requirements specific to current transformers to be used in DC applications (DCCTs), whatever the technology used. The output signal can be analogue or digital. It is applicable to newly manufactured current transformers used for measuring, protection and/or control applications in DC power systems with a rated voltage above 1,5 kV. The general configuration of a single-pole low-power instrument transformer is described in Figure 601 of IEC 61869-6:2016. The DCCTs ...view more

    • sale 10% off
    • Standard
      45 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      45 pages
      English language
    • e-Library read for
      1 day

IEC 61869-9:2016(E) is a product family standard applicable to instrument transformers with digital output. The product standard is composed of IEC 61869-1 and IEC 61869-6, in addition to this standard and the relevant product specific standards in the IEC 61869 series (Part 7, Part 8, Part 12, Part 13, Part 14, and Part 15). This standard defines requirements for digital communications of instrument transformer measurements. It is based on the IEC 61850 series, UCA international users group doc...view more

    • sale 10% off
    • Standard
      64 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      64 pages
      English language
    • e-Library read for
      1 day

Applies to electrical and electronic apparatus intended for use in residential, commercial and light-industrial environments. Immunity requirements in the frequency range 0 Hz to 400 GHz are covered. No tests need to be performed at frequencies where no requirements are specified. This generic EMC immunity standard is applicable if no relevant dedicated product or product-family EMC immunity standard exists. This standard applies to apparatus intended to be directly connected to a low-voltage pu...view more

    • sale 10% off
    • Standard
      22 pages
      English language
    • e-Library read for
      1 day

applies to electrical and electronic apparatus intended for use in industrial environments, as described below. Immunity requirements in the frequency range 0 Hz to 400 GHz are covered. No tests need to be performed at frequencies where no requirements are specified. This generic EMC immunity standard is applicable if no relevant dedicated product or product-family EMC immunity standard exists. This standard applies to apparatus intended to be connected to a power network supplied from a high or...view more

    • sale 10% off
    • Standard
      22 pages
      English language
    • e-Library read for
      1 day

2018-12-12: D161/C021: make available the standard without offering it for citation.
2018-09-17: following plenary meeting, CLC/TC 72 agreed to publish the project without Annex ZZ. No need for Common Modifications anymore. CLC/BT to approve the publication without link to EMC and LVD.  
2017-05-03: D156/C084 - Ratified standards not being made available.
2016-10-27: Publication on the hold (Common modifications needed + ZZ)

    • sale 10% off
    • Amendment
      17 pages
      English language
    • e-Library read for
      1 day

2018-12-12: D161/C021: make available the standard without offering it for citation.
2018-09-17: following plenary meeting, CLC/TC 72 agreed to publish the project without Annex ZZ. No need for Common Modifications anymore. CLC/BT to approve the publication without link to EMC and LVD.  
2017-05-03: D156/C084 - Ratified standards not being made available.
2016-10-27: Publication on the hold (Common modifications needed + ZZ)

    • sale 10% off
    • Amendment
      17 pages
      English language
    • e-Library read for
      1 day

Standard applies to automatic electrical temperature sensing controls for use in, on or in association with equipment, including electrical controls for heating, air-conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof. This standard is applicable to automatic electrical temperature sensing controls forming part of a building automation control system within the scope of ISO 16484. This standard also ...view more

    • sale 10% off
    • Standard
      66 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      66 pages
      English language
    • e-Library read for
      1 day

This part of IEC 61326 covers all equipment within the scope of IEC 61326-1, but is limited to
systems and equipment for industrial applications within a specified electromagnetic
environment and intended to perform safety functions as defined in IEC 61508 with SIL 1-3.
The electromagnetic environments encompassed by this product family standard are
industrial, both indoor and outdoor, and based on the requirements of the process industry,
specifically chemical/petrochemical/pharmaceutical ...
view more

    • sale 10% off
    • Standard
      41 pages
      English language
    • e-Library read for
      1 day

Applies to electrical and electronic apparatus intended for use in residential, commercial and light-industrial environments. Immunity requirements in the frequency range 0 Hz to 400 GHz are covered. No tests need to be performed at frequencies where no requirements are specified. This generic EMC immunity standard is applicable if no relevant dedicated product or product-family EMC immunity standard exists. This standard applies to apparatus intended to be directly connected to a low-voltage pu...view more

    • sale 10% off
    • Standard
      22 pages
      English language
    • e-Library read for
      1 day

NEW!IEC 60730-2-14:2017 is available as IEC 60730-2-14:2017 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60730-2-14:2017 applies to electric actuators for use in, on, or in association with equipment for household and similar use. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof. This International Standard is applicable to contr...view more

    • sale 10% off
    • Standard
      24 pages
      English language
    • e-Library read for
      1 day

applies to electrical and electronic apparatus intended for use in industrial environments, as described below. Immunity requirements in the frequency range 0 Hz to 400 GHz are covered. No tests need to be performed at frequencies where no requirements are specified. This generic EMC immunity standard is applicable if no relevant dedicated product or product-family EMC immunity standard exists. This standard applies to apparatus intended to be connected to a power network supplied from a high or...view more

    • sale 10% off
    • Standard
      22 pages
      English language
    • e-Library read for
      1 day

IEC 60730-2-9:2015(E) is available as IEC 60730-2-9:2015 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 60730-2-9:2015(E) applies to automatic electrical temperature sensing controls for use in, on or in association with equipment, including electrical controls for heating, air-conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal ener...view more

    • sale 10% off
    • Standard
      66 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      66 pages
      English language
    • e-Library read for
      1 day

This European Standard identifies material independent performance characteristics that are applicable to internal pedestrian doorsets without resistance to fire and/or smoke leakage characteristics.
This document applies to doorsets intended to be used internally for construction works:
- in escape routes not subject to fire and/or smoke leakage;
- for specific uses with specific requirements;
- for communication only.
NOTE These above intended uses can be combined, for example escape rout...
view more

    • sale 10% off
    • Standard
      53 pages
      English language
    • e-Library read for
      1 day

This part of IEC 61326 covers all equipment within the scope of IEC 61326-1, but is limited to systems and equipment for industrial applications within a specified electromagnetic environment and intended to perform safety functions as defined in IEC 61508 with SIL 1-3. The electromagnetic environments encompassed by this product family standard are industrial, both indoor and outdoor, and based on the requirements of the process industry, specifically chemical/petrochemical/pharmaceutical manuf...view more

    • sale 10% off
    • Standard
      41 pages
      English language
    • e-Library read for
      1 day

specifies electromagnetic compatibility (EMC) requirements for power drive systems (PDSs). A PDS is defined in 3.1. These are adjustable speed a.c. or d.c. motor drives. Requirements are stated for PDSs with converter input and/or output voltages (line-to-line voltage), up to 35 kV a.c. r.m.s.

    • sale 10% off
    • Standard
      126 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      126 pages
      English language
    • e-Library read for
      1 day

Specifies electromagnetic compatibility (EMC) requirements for power supply units (PSUs) providing d.c. output(s) up to 200 V at a power level of up to 30 kW, operating from a.c. or d.c. source voltages of up to 600 V.

    • sale 10% off
    • Standard
      45 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      45 pages
      English language
    • e-Library read for
      1 day

Is intended as a product standard allowing the EMC conformity assessment of products of categories C1, C2 and C3 as defined in this part of EN 62040, before placing them on the market.The requirements have been selected so as to ensure an adequate level of electromagnetic compatibility (EMC) for UPS at public and industrial locations.

    • sale 10% off
    • Standard
      51 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      51 pages
      English language
    • e-Library read for
      1 day

This European Standard identifies material independent performance characteristics, except resistance to fire and smoke control characteristics, which are applicable to internal pedestrian doorsets.
Fire resisting and/or smoke control characteristics for pedestrian doorsets and openable windows are covered by EN 16034.
This European Standard applies to doorsets intended to be used internally for construction works as:
-   intended use a) in escape routes;
-   intended use b) for specific uses wi...
view more

    • sale 10% off
    • Standard
      53 pages
      English language
    • e-Library read for
      1 day

Is intended as a product standard allowing the EMC conformity assessment of products of categories C1, C2 and C3 as defined in this part of EN 62040, before placing them on the market.The requirements have been selected so as to ensure an adequate level of electromagnetic compatibility (EMC) for UPS at public and industrial locations.

    • sale 10% off
    • Standard
      51 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      51 pages
      English language
    • e-Library read for
      1 day

specifies electromagnetic compatibility (EMC) requirements for power drive systems (PDSs). A PDS is defined in 3.1. These are adjustable speed a.c. or d.c. motor drives. Requirements are stated for PDSs with converter input and/or output voltages (line-to-line voltage), up to 35 kV a.c. r.m.s.

    • sale 10% off
    • Standard
      126 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      126 pages
      English language
    • e-Library read for
      1 day

Specifies electromagnetic compatibility (EMC) requirements for power supply units (PSUs) providing d.c. output(s) up to 200 V at a power level of up to 30 kW, operating from a.c. or d.c. source voltages of up to 600 V.

    • sale 10% off
    • Standard
      45 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      45 pages
      English language
    • e-Library read for
      1 day

This International Standard provides test methods and acceptance criteria for the evaluation of the electromagnetic compatibility of construction machinery as defined in ISO 6165 for earth-moving machinery and ISO 8811 for road-construction machines.  
It deals with General EMC requirements under typical EMC environmental conditions.
Functional safety requirements are covered in part 2 of ISO 13766.
Electrical and/or electronic component(s) or separate technical unit(s) intended to be fitted ...
view more

    • sale 10% off
    • Standard
      51 pages
      English language
    • e-Library read for
      1 day

ISO 13766-1:2018 provides test methods and acceptance criteria for the evaluation of the electromagnetic compatibility (EMC) of earth-moving machinery, as defined in ISO 6165:2012, and of the following building construction machinery as defined in ISO/TR 12603:2010:
- drilling and foundation equipment;
- equipment used for the preparation, conveyance and compaction of concrete, mortar and processing reinforcement;
- road construction and maintenance machinery and equipment.
ISO 13766-1:2018 ...
view more

    • sale 10% off
    • Standard
      51 pages
      English language
    • e-Library read for
      1 day

This part of IEC 60730 applies to automatic electrical humidity sensing controls for use in, on
or in association with equipment, including controls for heating, air-conditioning and similar
applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc.
or a combination thereof.
NOTE Throughout this standard, the word "equipment" includes "appliance" and "control system".
This International Standard is applicable to automatic electrical humidity sensing co...
view more

    • sale 10% off
    • Standard
      22 pages
      English language
    • e-Library read for
      1 day

IEC 60730-2-13:2017 applies to automatic electrical humidity sensing controls for use in, on or in association with equipment, including controls for heating, air-conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc. or a combination thereof. This Standard is applicable to automatic electrical humidity sensing controls forming part of a building automation control system within the scope of ISO 16484. This standard also applies...view more

    • sale 10% off
    • Standard
      22 pages
      English language
    • e-Library read for
      1 day

IEC 62606:2013 applies to arc fault detection devices (AFDD) for household and similar uses in a.c. circuits. An AFDD is designed by the manufacturer:  - either as a single device having opening means able to open the protected circuit in specified conditions; or  - as a single device integrating a protective device; or  - as a separate unit, according to Annex D assembled on site with a declared protective device.

    • sale 10% off
    • Amendment
      25 pages
      English language
    • e-Library read for
      1 day

This part of IEC 62586 specifies product and performance requirements for instruments
whose functions include measuring, recording and possibly monitoring power quality
parameters in power supply systems, and whose measuring methods (class A or class S) are
defined in IEC 61000-4-30.
These requirements are applicable in single, dual- (split phase) and 3-phase AC power supply
systems at 50 Hz or 60 Hz.
These instruments can be used:
• in the generation, transmission and distribution of ele...
view more

    • sale 10% off
    • Standard
      38 pages
      English language
    • e-Library read for
      1 day

This part of IEC 60947 applies to control circuit devices and switching elements intended for
controlling, signalling, interlocking, etc., of switchgear and controlgear.
It applies to control circuit devices having a rated voltage not exceeding 1 000 V a.c. (at a
frequency not exceeding 1 000 Hz) or 600 V d.c.
However, for operational voltages below 100 V a.c. or d.c., see 4.3.2.2.
This standard applies to specific types of control circuit devices such as:
• manual control switches, for ex...
view more

    • sale 10% off
    • Standard
      119 pages
      English language
    • e-Library read for
      1 day

IEC 60947-5-1:2016 is available as IEC 60947-5-1:2016 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 60947-5-1:2016 applies to control circuit devices and switching elements intended for controlling, signalling, interlocking, etc., of switchgear and controlgear. It applies to control circuit devices having a rated voltage not exceeding 1 000 V a.c. (at a frequency not exceeding 1 000 Hz) or...view more

    • sale 10% off
    • Standard
      119 pages
      English language
    • e-Library read for
      1 day

IEC 62606:2013 applies to arc fault detection devices (AFDD) for household and similar uses in a.c. circuits. An AFDD is designed by the manufacturer: - either as a single device having opening means able to open the protected circuit in specified conditions; or - as a single device integrating a protective device; or - as a separate unit, according to Annex D assembled on site with a declared protective device.

    • sale 10% off
    • Amendment
      25 pages
      English language
    • e-Library read for
      1 day

This part of IEC 61326 covers all equipment within the scope of IEC 61326-1, but is limited to
systems and equipment for industrial applications intended to perform safety functions as
defined in IEC 61508 with SIL 1-3.
The electromagnetic environments encompassed by this product family standard are
industrial, both indoor and outdoor, as described for industrial locations in IEC 61000-6-2 or
defined in 3.8 of IEC 61326-1. Equipment and systems intended for use in other
electromagnetic env...
view more

    • sale 10% off
    • Standard
      45 pages
      English language
    • e-Library read for
      1 day

IEC 62586-2:2017(E) specifies functional tests and uncertainty requirements for instruments whose functions include measuring, recording, and possibly monitoring power quality parameters in power supply systems, and whose measuring methods (class A or class S) are defined in IEC 61000-4-30.
This document applies to power quality instruments complying with IEC 62586-1.
This document can also be referred to by other product standards (e.g. digital fault recorders, revenue meters, MV or HV protec...
view more

    • sale 10% off
    • Standard
      144 pages
      English language
    • e-Library read for
      1 day

IEC 62586-1:2017 specifies product and performance requirements for instruments whose functions include measuring, recording and possibly monitoring power quality parameters in power supply systems, and whose measuring methods (class A or class S) are defined in IEC 61000-4-30. These requirements are applicable in single, dual- (split phase) and 3-phase AC power supply systems at 50 Hz or 60 Hz. This edition includes the following significant technical changes with respect to the previous editio...view more

    • sale 10% off
    • Standard
      38 pages
      English language
    • e-Library read for
      1 day

intended to be connected to circuits, the rated voltage of which does not exceed 1 000 V a.c. or
1 500 V d.c.; it also contains additional requirements for integrally fused circuit-breakers.
Circuit-breakers rated above 1 000 V a.c. but not exceeding 1 500 V a.c. may also be tested to
this standard.
It applies whatever the rated currents, the method of construction or the proposed applications
of the circuit-breakers may be.
The requirements for circuit-breakers which are also intended to ...
view more

    • sale 10% off
    • Standard
      249 pages
      English language
    • e-Library read for
      1 day

IEC 60947-2:2016 is available as IEC 60947-2:2016 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 60947-2:2016 applies to circuit-breakers, the main contacts of which are intended to be connected to circuits, the rated voltage of which does not exceed 1 000 V a.c. or 1 500 V d.c.; it also contains additional requirements for integrally fused circuit-breakers. This fifth edition cancels and r...view more

    • sale 10% off
    • Standard
      249 pages
      English language
    • e-Library read for
      1 day

IEC 62689-2:2016 describes electric phenomena and electric system behaviour during faults, according to the most widely diffused distribution system architecture and to fault typologies, to define the functional requirements for fault passage indicators (FPI) and distribution substation units (DSU) (including their current and/or voltage sensors), which are, respectively, a device or a device/combination of devices and/or of functions able to detect faults and provide indications about their loc...view more

    • sale 10% off
    • Standard
      52 pages
      English language
    • e-Library read for
      1 day

IEC 62586-2:2017(E) specifies functional tests and uncertainty requirements for instruments whose functions include measuring, recording, and possibly monitoring power quality parameters in power supply systems, and whose measuring methods (class A or class S) are defined in IEC 61000-4-30. This document applies to power quality instruments complying with IEC 62586-1. This document can also be referred to by other product standards (e.g. digital fault recorders, revenue meters, MV or HV protecti...view more

    • sale 10% off
    • Standard
      144 pages
      English language
    • e-Library read for
      1 day

CISPR 35:2016 applies to multimedia equipment (MME) having a rated AC or DC supply voltage not exceeding 600 V. The objectives of this document are:<br /> - to establish requirements which provide an adequate level of intrinsic immunity so that the MME will operate as intended in its environment in the frequency range 0 kHz to 400 GHz; and<br /> - to specify procedures to ensure the reproducibility of tests and the repeatability of results.

    • sale 10% off
    • Standard
      90 pages
      English language
    • e-Library read for
      1 day

NEW!IEC 61326-3-1:2017 is available as IEC 61326-3-1:2017 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61326-3-1:2017 covers all equipment within the scope of IEC 61326-1, but is limited to systems and equipment for industrial applications intended to perform safety functions as defined in IEC 61508 with SIL 1-3. This second edition cancels and replaces the first edition published in 2008....view more

    • sale 10% off
    • Standard
      45 pages
      English language
    • e-Library read for
      1 day

Specifies particular requirements for the type test of newly manufactured indoor time switches with operation reserve that are used to control electrical loads, multi-tariff registers and maximum demand devices of electricity metering equipment

    • sale 10% off
    • Amendment
      6 pages
      English language
    • e-Library read for
      1 day

2020-03-12: A11 allows citation EMCD
2019-08-13: Annex ZZ in line with EC suggestions received
2018-12-05: TC to clarify if improved FW is needed
2017-04-19: D156/C084 - Ratified standards not being made available
2017-03-28: BT decided to have this standard published (D156/C084)
2016-10: Publication on the hold pending Annex ZZ and positive assessment about EMC directive

    • sale 10% off
    • Amendment
      14 pages
      English language
    • e-Library read for
      1 day