SIST ES 202 737 V1.8.1:2020

SLOVENSKI STANDARD
SIST ES 202 737 V1.8.1:2020
01-julij-2020
Kakovost prenosa govora in večpredstavnih vsebin (STQ) - Prenosne zahteve za
ozkopasovne terminale VoIP (ročne in naglavne) glede na kakovost storitev (QoS),
kot jo dojema uporabnik
Speech and multimedia Transmission Quality (STQ) - Transmission requirements for

narrowband VoIP terminals (handset and headset) from a QoS perspective as perceived

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

The present document may be made available in electronic versions and/or in print. The content of any electronic and/or

print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any

existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI

deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.

Users of the present document should be aware that the document may be subject to revision or change of status.

Information on the current status of this and other ETSI documents is available at

If you find errors in the present document, please send your comment to one of the following services:

No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying

The content of the PDF version shall not be modified without the written authorization of ETSI.

DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.

3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and

oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and

Intellectual Property Rights ................................................................................................................................ 5

Foreword ............................................................................................................................................................. 5

Modal verbs terminology .................................................................................................................................... 5

Introduction ........................................................................................................................................................ 5

1 Scope ........................................................................................................................................................ 6

2 References ................................................................................................................................................ 6

2.1 Normative references ......................................................................................................................................... 6

2.2 Informative references ........................................................................................................................................ 7

3 Definition of terms, symbols and abbreviations ....................................................................................... 8

3.1 Terms .................................................................................................................................................................. 8

3.2 Symbols .............................................................................................................................................................. 9

3.3 Abbreviations ..................................................................................................................................................... 9

4 General considerations ........................................................................................................................... 10

4.1 Default coding algorithm .................................................................................................................................. 10

4.2 End-to-end considerations ................................................................................................................................ 10

5 Test equipment ....................................................................................................................................... 10

5.1 IP half channel measurement adaptor ............................................................................................................... 10

5.2 Environmental conditions for tests ................................................................................................................... 10

5.3 Accuracy of measurements and test signal generation ..................................................................................... 11

5.4 Network impairment simulation ....................................................................................................................... 11

5.5 Acoustic environment ....................................................................................................................................... 12

5.6 Influence of terminal delay on measurements .................................................................................................. 12

6 Requirements and associated measurement methodologies ................................................................... 12

6.1 Notes ................................................................................................................................................................ 12

6.2 Test setup.......................................................................................................................................................... 12

6.2.1 General ........................................................................................................................................................ 12

6.2.2 Setup for handsets and headsets .................................................................................................................. 13

6.2.3 Position and calibration of HATS ............................................................................................................... 13

6.2.4 Test signal levels ......................................................................................................................................... 14

6.2.5 Setup of background noise simulation ........................................................................................................ 14

6.2.6 Setup of variable echo path ......................................................................................................................... 14

6.2.7 Setup for testing positional robustness of handsets..................................................................................... 16

6.3 Coding independent parameters ....................................................................................................................... 17

6.3.1 Send frequency response ............................................................................................................................ 17

6.3.1.1 Send frequency response - nominal position ......................................................................................... 17

6.3.1.2 Send frequency response - positional robustness .................................................................................. 18

6.3.2 Send Loudness Rating (SLR)...................................................................................................................... 18

6.3.2.1 Send Loudness Rating (SLR) - nominal position .................................................................................. 18

6.3.2.2 Send Loudness Rating (SLR) - positional robustness ........................................................................... 19

6.3.3 Mic mute ..................................................................................................................................................... 19

6.3.4 Quality of send AGC (Automatic Gain Control) ........................................................................................ 19

6.3.5 Send distortion ............................................................................................................................................ 20

6.3.6 Out-of-band signals in send direction ......................................................................................................... 20

6.3.7 Send noise ................................................................................................................................................... 21

6.3.8 Sidetone Masking Rating STMR (mouth to ear) ........................................................................................ 21

6.3.9 Sidetone delay ............................................................................................................................................. 22

6.3.10 Terminal Coupling Loss weighted (TCLw) ................................................................................................ 22

6.3.11 Stability loss................................................................................................................................................ 23

6.3.12 Receive frequency response ........................................................................................................................ 24

6.3.12.1 Receive frequency response - nominal position .................................................................................... 24

6.3.12.2 Receive frequency response - positional robustness ............................................................................. 27

6.3.13 Receive Loudness Rating (RLR) ................................................................................................................ 27

6.3.13.1 Receive Loudness Rating (RLR) - nominal position ............................................................................ 27

6.3.13.2 Receive Loudness Rating (RLR) - positional robustness ...................................................................... 28

6.3.14 Receive distortion ....................................................................................................................................... 28

6.3.15 Out-of-band signals in receive direction ..................................................................................................... 28

6.3.16 Minimum activation level and sensitivity in receive direction ................................................................... 29

6.3.17 Receive noise .............................................................................................................................................. 29

6.3.18 Automatic level control in receive .............................................................................................................. 29

6.3.19 Double talk performance ............................................................................................................................ 30

6.3.19.1 General .................................................................................................................................................. 30

6.3.19.2 Attenuation range in send direction during double talk A .............................................................. 30

6.3.19.3 Attenuation range in receive direction during double talk A ......................................................... 31

6.3.19.4 Detection of echo components during double talk ................................................................................ 32

6.3.19.5 Minimum activation level and sensitivity of double talk detection ....................................................... 33

6.3.20 Switching characteristics ............................................................................................................................ 33

6.3.20.1 Note ....................................................................................................................................................... 33

6.3.20.2 Activation in send direction .................................................................................................................. 33

6.3.20.3 Silence suppression and comfort noise generation ................................................................................ 34

6.3.21 Background noise performance .................................................................................................................. 34

6.3.21.1 Performance in send direction in the presence of background noise ..................................................... 34

6.3.21.2 Speech quality in the presence of background noise ............................................................................. 35

6.3.21.3 Quality of background noise transmission (with far end speech).......................................................... 36

6.3.21.4 Positional Robustness of Speech Quality in the Presence of Background Noise .................................. 37

6.3.22 Quality of echo cancellation ....................................................................................................................... 37

6.3.22.1 Temporal echo effects ........................................................................................................................... 37

6.3.22.2 Spectral echo attenuation ...................................................................................................................... 38

6.3.22.3 Occurrence of artefacts ......................................................................................................................... 38

6.3.22.4 Variable echo path................................................................................................................................. 38

6.3.23 Variant impairments ................................................................................................................................... 39

6.3.23.1 Clock accuracy send .............................................................................................................................. 39

6.3.23.2 Clock accuracy receive ......................................................................................................................... 39

6.3.23.3 Send packet delay variation................................................................................................................... 39

6.3.24 Send and receive delay - round trip delay ................................................................................................... 40

6.4 Codec specific requirements............................................................................................................................. 42

6.4.1 Objective listening speech quality MOS-LQO in send direction ................................................................ 42

6.4.2 Objective listening speech quality MOS-LQO in receive direction............................................................ 42

6.4.3 Quality of jitter buffer adjustment .............................................................................................................. 44

Annex A (informative): Processing delays in VoIP terminals ............................................................ 47

Annex B (informative): Example IP delay variation for jitterbuffer quality measurements .......... 50

Annex C (informative): Bibliography ................................................................................................... 51

Annex D (normative): Delay variation definition for network impairment emulation ................. 52

History .............................................................................................................................................................. 54

IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information

pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found

in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in

respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web

Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee

can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web

The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.

ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no

right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does

not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.

This ETSI Standard (ES) has been produced by ETSI Technical Committee Speech and multimedia Transmission

In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and

"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of

"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.

Traditionally, analogue and digital telephones were interfacing switched-circuit 64 kbit/s PCM networks. With the fast

growth of IP networks, terminals directly interfacing packet-switched networks (VoIP) are being rapidly introduced.

Such IP network edge devices may include gateways, specifically designed IP phones, soft phones or other devices

connected to the IP based networks, providing telephony service. Since the IP networks will be in many cases

interworking with the traditional PSTN and private networks, many of the basic transmission requirements have to be

harmonised with specifications for traditional digital terminals. However, due to the unique characteristics of the IP

networks including packet loss, delay, etc. new performance specifications, as well as appropriate measurement

methods, will have to be developed. Terminals are getting increasingly complex, advanced signal processing is used to

address the IP specific issues. Also, the VoIP terminals may use other than 64 kbit/s PCM (Recommendation ITU-T

The advanced signal processing of terminals is targeted to speech signals. Therefore, wherever possible speech signals

are used for testing in order to achieve mostly realistic test conditions and meaningful results.

The present document provides speech transmission performance requirements for narrowband VoIP handset and

NOTE: Requirement limits are given in tables, the associated curve when provided is given for illustration.

The present document provides speech transmission performance requirements for 3,4 kHz narrowband VoIP handset

and headset terminals; it addresses all types of IP based terminals, including wireless and soft phones.

DECT terminals are covered in ETSI EN 300 175-8 [i.6] and ETSI EN 300 176-2 [i.7].

In contrast to other standards which define minimum performance requirements it is the intention of the present

document to specify terminal equipment requirements which enable manufacturers and service providers to enable good

In addition to basic testing procedures, the present document describes advanced testing procedures taking into account

References are either specific (identified by date of publication and/or edition number or version number) or

non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the

Referenced documents which are not found to be publicly available in the expected location might be found at

NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee

The following referenced documents are necessary for the application of the present document.

[1] ETSI EN 300 726: "Digital cellular telecommunications system (Phase 2+) (GSM); Enhanced Full

[2] ETSI TS 126 171: "Digital cellular telecommunications system (Phase 2+); Universal Mobile

Telecommunications System (UMTS); LTE; Speech codec speech processing functions; Adaptive

Multi-Rate - Wideband (AMR-WB) speech codec; General description (3GPP TS 26.171)".

[3] Recommendation ITU-T G.107: "The E-model: a computational model for use in transmission

[5] Recommendation ITU-T G.109: "Definition of categories of speech transmission quality".

[6] Recommendation ITU-T G.122: "Influence of national systems on stability and talker echo in

[7] Recommendation ITU-T G.711: "Pulse code modulation (PCM) of voice frequencies".

[8] Recommendation ITU-T G.723.1: "Dual rate speech coder for multimedia communications

[9] Recommendation ITU-T G.726: "40, 32, 24, 16 kbit/s Adaptive Differential Pulse Code

[10] Recommendation ITU-T G.729: "Coding of speech at 8 kbit/s using conjugate-structure algebraic-

[11] Recommendation ITU-T G.729.1: "G.729-based embedded variable bit-rate coder: An 8-32 kbit/s

[15] Recommendation ITU-T P.64: "Determination of sensitivity/frequency characteristics of local

[16] Recommendation ITU-T P.79: "Calculation of loudness ratings for telephone sets".

[17] Recommendation ITU-T P.340: "Transmission characteristics and speech quality parameters of

[20] Recommendation ITU-T P.502: "Objective test methods for speech communication systems using

[21] Recommendation ITU-T P.581: "Use of head and torso simulator for hands-free and handset

[22] IEC 61260-1: "Electroacoustics - Octave-band and fractional-octave-band filters -

[24] ETSI ES 202 739: "Speech and multimedia Transmission Quality (STQ); Transmission

requirements for wideband VoIP terminals (handset and headset) from a QoS perspective as

[25] ETSI TS 103 224: "Speech and multimedia Transmission Quality (STQ); A sound field

[26] Recommendation ITU-T P.863: "Perceptual objective listening quality prediction".

[27] Recommendation ITU-T P.863.1: "Application guide for Recommendation ITU-T P.863".

[28] Recommendation ITU-T P.1010: "Fundamental voice transmission objectives for VoIP terminals

References are either specific (identified by date of publication and/or edition number or version number) or

non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the

NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee

The following referenced documents are not necessary for the application of the present document but they assist the

[i.1] ETSI EG 201 377-1: "Speech and multimedia Transmission Quality (STQ); Specification and

measurement of speech transmission quality; Part 1: Introduction to objective comparison

[i.2] ETSI EG 202 425: "Speech Processing, Transmission and Quality Aspects (STQ); Definition and

[i.3] ETSI EG 202 396-3: "Speech and multimedia Transmission Quality (STQ); Speech Quality

performance in the presence of background noise; Part 3: Background noise transmission -

NOTE: Information available at https://wiki.linuxfoundation.org/networking/netem.

[i.6] ETSI EN 300 175-8: "Digital Enhanced Cordless Telecommunications (DECT); Common

[i.7] ETSI EN 300 176-2: "Digital Enhanced Cordless Telecommunications (DECT); Test

artificial ear: device for the calibration of earphones incorporating an acoustic coupler and a calibrated microphone for

the measurement of the sound pressure and having an overall acoustic impedance similar to that of the median adult

codec: combination of an analogue-to-digital encoder and a digital-to-analogue decoder operating in opposite directions

Composite Source Signal (CSS): signal composed in time by various signal elements

diffuse field equalization: equalization of the HATS sound pick-up, equalization of the difference, in dB, between the

spectrum level of the acoustic pressure at the ear Drum Reference Point (DRP) and the spectrum level of the acoustic

pressure at the HATS Reference Point (HRP) in a diffuse sound field with the HATS absent using the reverse nominal

Ear Reference Point (ERP): virtual point for geometric reference located at the entrance to the listener's ear,

ear-Drum Reference Point (DRP): point located at the end of the ear canal, corresponding to the ear-drum position

freefield reference point: point located in the free sound field, at least in 1,5 m d