SIST ES 202 740 V1.7.1:2018

SLOVENSKI STANDARD
SIST ES 202 740 V1.7.1:2018
01-maj-2018
.DNRYRVWSUHQRVDJRYRUDLQYHþSUHGVWDYQLKYVHELQ6743UHQRVQH]DKWHYH]D
ãLURNRSDVRYQH]YRþQLãNHLQSURVWRURþQHWHUPLQDOH9R,3JOHGHQDNDNRYRVW
VWRULWHY4R6NRWMLKGRMHPDXSRUDEQLN
Speech and multimedia Transmission Quality (STQ) - Transmission requirements for
wideband VoIP loudspeaking and handsfree terminals from a QoS perspective as
perceived by the user
Ta slovenski standard je istoveten z: ETSI ES 202 740 V1.7.1 (2017-09)
ICS:
33.050.01 Telekomunikacijska Telecommunication terminal
terminalska oprema na equipment in general
splošno
SIST ES 202 740 V1.7.1:2018 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

The present document may be made available in electronic versions and/or in print. The content of any electronic and/or

print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any

existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the

print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.

Users of the present document should be aware that the document may be subject to revision or change of status.

Information on the current status of this and other ETSI documents is available at

If you find errors in the present document, please send your comment to one of the following services:

No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying

The content of the PDF version shall not be modified without the written authorization of ETSI.

DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.

3GPP and LTE™ are trademarks of ETSI registered for the benefit of its Members and

GSM® and the GSM logo are trademarks registered and owned by the GSM Association.

Intellectual Property Rights ................................................................................................................................ 5

Foreword ............................................................................................................................................................. 5

Modal verbs terminology .................................................................................................................................... 5

Introduction ........................................................................................................................................................ 5

1 Scope ........................................................................................................................................................ 6

2 References ................................................................................................................................................ 6

2.1 Normative references ......................................................................................................................................... 6

2.2 Informative references ........................................................................................................................................ 7

3 Definitions and abbreviations ................................................................................................................... 8

3.1 Definitions .......................................................................................................................................................... 8

3.2 Abbreviations ..................................................................................................................................................... 9

4 General considerations ........................................................................................................................... 10

4.1 Coding algorithm .............................................................................................................................................. 10

4.2 End-to-end considerations ................................................................................................................................ 10

5 Test equipment ....................................................................................................................................... 10

5.1 IP half channel measurement adaptor ............................................................................................................... 10

5.2 Environmental conditions for tests ................................................................................................................... 10

5.3 Accuracy of measurements and test signal generation ..................................................................................... 11

5.4 Network impairment simulation ....................................................................................................................... 11

5.5 Acoustic environment ....................................................................................................................................... 12

5.6 Influence of terminal delay on measurements .................................................................................................. 12

6 Requirements and associated measurement methodologies ................................................................... 13

6.1 Notes ................................................................................................................................................................ 13

6.2 Test setup.......................................................................................................................................................... 13

6.2.1 General ........................................................................................................................................................ 13

6.2.2 Setup for terminals ...................................................................................................................................... 14

6.2.2.1 Hands-free measurements ..................................................................................................................... 14

6.2.2.2 Measurements in loudspeaking mode ................................................................................................... 19

6.2.3 Test signal levels ......................................................................................................................................... 19

6.2.3.1 Send....................................................................................................................................................... 19

6.2.3.2 Receive .................................................................................................................................................. 20

6.2.4 Setup of background noise simulation ........................................................................................................ 20

6.2.5 Setup for variable echo path ....................................................................................................................... 20

6.3 Coding independent parameters ....................................................................................................................... 21

6.3.1 Send sensitivity/frequency response ........................................................................................................... 21

6.3.2 Send Loudness Rating (SLR)...................................................................................................................... 22

6.3.3 Mic mute ..................................................................................................................................................... 22

6.3.4 Send distortion ............................................................................................................................................ 23

6.3.5 Out-of-band signals in send direction ......................................................................................................... 23

6.3.6 Send noise ................................................................................................................................................... 24

6.3.7 Terminal Coupling Loss (TCL) .................................................................................................................. 24

6.3.8 Stability loss................................................................................................................................................ 25

6.3.9 Receive frequency response ........................................................................................................................ 26

6.3.10 Receive Loudness Rating (RLR) ................................................................................................................ 28

6.3.11 Receive distortion ....................................................................................................................................... 29

6.3.12 Out-of-band signals in receive direction ..................................................................................................... 30

6.3.13 Receive noise .............................................................................................................................................. 30

6.3.14 Double talk performance ............................................................................................................................ 31

6.3.14.1 General .................................................................................................................................................. 31

6.3.14.2 Attenuation range in send direction during double talk A .............................................................. 31

6.3.14.3 Attenuation range in receive direction during double talk A ......................................................... 32

6.3.14.4 Detection of echo components during double talk ................................................................................ 33

6.3.14.5 Minimum activation level and sensitivity of double talk detection ....................................................... 34

6.3.15 Switching characteristics ............................................................................................................................ 34

6.3.15.1 Note ....................................................................................................................................................... 34

6.3.15.2 Activation in send direction .................................................................................................................. 35

6.3.15.3 Silence suppression and comfort noise generation ................................................................................ 35

6.3.16 Background noise performance .................................................................................................................. 35

6.3.16.1 Performance in send direction in the presence of background noise ..................................................... 35

6.3.16.2 Speech quality in the presence of background noise ............................................................................. 36

6.3.16.3 Quality of background noise transmission (with far end speech).......................................................... 37

6.3.17 Quality of echo cancellation ....................................................................................................................... 37

6.3.17.1 Temporal echo effects ........................................................................................................................... 37

6.3.17.2 Spectral echo attenuation ...................................................................................................................... 38

6.3.17.3 Occurrence of artefacts ......................................................................................................................... 39

6.3.17.4 Variable echo path................................................................................................................................. 39

6.3.18 Variant impairments; network dependant ................................................................................................... 39

6.3.18.1 Clock accuracy send .............................................................................................................................. 39

6.3.18.2 Clock accuracy receive ......................................................................................................................... 39

6.3.18.3 Send packet delay variation................................................................................................................... 40

6.3.19 Send and receive delay - round trip delay ................................................................................................... 40

6.4 Codec specific requirements............................................................................................................................. 42

6.4.1 Objective listening speech quality MOS-LQO in send direction ................................................................ 42

6.4.2 Objective listening quality MOS-LQO in receive direction ....................................................................... 43

6.4.3 Quality of jitter buffer adjustment .............................................................................................................. 45

Annex A (informative): Processing delays in VoIP terminals ............................................................ 47

Annex B (informative): Bibliography ................................................................................................... 50

History .............................................................................................................................................................. 51

IPRs essential or potentially essential to the present document may have been declared to ETSI. The information

pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found

in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in

respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web

Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee

can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web

The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.

ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no

right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does

not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.

This ETSI Standard (ES) has been produced by ETSI Technical Committee Speech and multimedia Transmission

In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and

"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of

"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.

Traditionally, the analogue and digital telephones were interfacing switched-circuit 64 kbit/s PCM networks. With the

fast growth of IP networks, wideband terminals providing higher audio-bandwidth and directly interfacing

packet-switched networks (VoIP) are being rapidly introduced. Such IP network edge devices may include gateways,

specifically designed IP phones, soft phones or other devices connected to the IP based networks and providing

telephony service. Due to the unique characteristics of the IP networks including packet loss, delay, etc. new

performance specification, as well as appropriate measuring methods, will have to be developed. Terminals are getting

The advanced signal processing of terminals is targeted to speech signals. Therefore, wherever possible speech signals

are used for testing in order to achieve mostly realistic test conditions and meaningful results.

The present document provides speech transmission performance requirements for wideband VoIP loudspeaking and

NOTE: Requirement limits are given in tables, the associated curve when provided is given for illustration.

The present document provides speech transmission performance requirements for 8 kHz wideband VoIP loudspeaking

and hands-free terminals; it addresses all types of IP based terminals, including wireless, softphones and group audio

In contrast to other standards which define minimum performance requirements it is the intention of the present

document to specify terminal equipment requirements which enable manufacturers and service providers to enable good

In addition to basic testing procedures, the present document describes advanced testing procedures taking into account

References are either specific (identified by date of publication and/or edition number or version number) or

non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the

Referenced documents which are not found to be publicly available in the expected location might be found at

NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee

The following referenced documents are necessary for the application of the present document.

[1] ETSI I-ETS 300 245-6: "Integrated Services Digital Network (ISDN); Technical characteristics of

telephony terminals; Part 6: Wideband (7 kHz), loudspeaking and hands free telephony".

[3] Recommendation ITU-T G.109: "Definition of categories of speech transmission quality".

[5] Recommendation ITU-T G.722.1: "Low-complexity coding at 24 and 32 kbit/s for hands-free

[6] Recommendation ITU-T G.722.2: "Wideband coding of speech at around 16 kbit/s using Adaptive

[7] Recommendation ITU-T G.729.1: "G.729 based Embedded Variable bit-rate coder: An 8-32 kbit/s

[10] Recommendation ITU-T P.79: "Calculation of loudness ratings for telephone sets".

[11] Recommendation ITU-T P.310: "Transmission characteristics for narrow-band digital handset and

[12] Recommendation ITU-T P.340: "Transmission characteristics and speech quality parameters of

[13] Recommendation ITU-T P.341: "Transmission characteristics for wideband digital loudspeaking

[15] Recommendation ITU-T P.502: "Objective test methods for speech communication systems using

[16] Recommendation ITU-T P.581: "Use of head and torso simulator for hands-free and handset

[17] IEC 61260-1: "Electroacoustics - Octave-band and fractional-octave-band filters - Part 1:

[19] ETSI TS 103 224: "Speech and multimedia Transmission Quality (STQ); A sound field

[20] Recommendation ITU-T P.863.1: "Application guide for Recommendation ITU-T P.863".

[21] Recommendation ITU-T P.863: "Perceptual objective listening quality assessment".

[22] ETSI ES 202 737: "Speech and multimedia Transmission Quality (STQ); Transmission

requirements for narrowband VoIP terminals (handset and headset) from a QoS perspective as

[23] Recommendation ITU-T P.1010: "Fundamental voice transmission objectives for VoIP terminals

[25] TIA-920.130: "Telecommunications Telephone Terminal Equipment Transmission Requirements

[26] Recommendation ITU-T G.122: "Influence of national systems on stability and talker echo in

References are either specific (identified by date of publication and/or edition number or version number) or

non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the

NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee

The following referenced documents are not necessary for the application of the present document but they assist the

[i.1] ETSI EG 202 425: "Speech Processing, Transmission and Quality Aspects (STQ); Definition and

[i.2] ETSI EG 202 396-3: "Speech and multimedia Transmission Quality (STQ); Speech Quality

performance in the presence of background noise; Part 3: Background noise transmission -

[i.7] ETSI EG 201 377-1: "Speech and multimedia Transmission Quality (STQ); Specification and

measurement of speech transmission quality; Part 1: Introduction to objective comparison

For the purposes of the present document, the following terms and definitions apply:

artificial ear: device for the calibration of earphones incorporating an acoustic coupler and a calibrated microphone for

the measurement of the sound pressure and having an overall acoustic impedance similar to that of the median adult

codec: combination of an analogue-to-digital encoder and a digital-to-analogue decoder operating in opposite directions

ear-Drum Reference Point (DRP): point located at the end of the ear canal, corresponding to the ear-drum position

freefield equalization: artificial head is equalized in such a way that for frontal sound incidence in anechoic conditions

freefield reference point: point located in the free sound field, at least in 1,5 m distance from a sound source radiating

NOTE: In case of a head and torso simulator (HATS) in the centre of the artificial head with no artificial head

group-audio terminal: handsfree terminal primarily designed for use by several users which will not be equipped with

handsfree telephony terminal: telephony terminal using a loudspeaker associated with an amplifier as a telephone

HATS Hands-Free Reference Point (HATS HFRP): reference point "n" from Recommendation ITU-T P.58 [9] "n" is

one of the points numbered from 11 to 17 and defined in table 6a of Recommendation ITU-T P.58 [9], (coordinates of

NOTE: The HATS HFRP depends on the location(s) of the microphones of the terminal under test: the

appropriate axis lip-ring/HATS HFRP is to be as close as possible to the axis lip-ring/HFT microphone

Head And Torso Simulator (HATS) for telephonometry: manikin extending downward from the top of the head to

the waist, designed to simulate the sound pick-up characteristics and the acoustic diffraction produced by a median

loudspeaking function: function of a handset telephone using a loudspeaker associated with an amplifier as a

Mouth Reference Point (MRP): point located on axis and 25 mm in front of the lip plane of a mouth simulator

nominal setting of the volume control: setting which is closest to the nominal RLR

ITU-T International Telecommunication Union -Telecommunication standardization sector

NOTE: y being N for narrow-band, W for wideband, M for mixed and S for superwideband. See