SIST ISO 11628:1997

Graphic technology -- Prints and printing inks -- Determination of resistance of prints to acids

Specifies a method for assessing the resistance of prints to acids. Applicable to all printing processes and all printing substrates such as paper, board, plastics and metals.

Technologie graphique -- Impressions et encres d'imprimerie -- Détermination de la résistance des impressions aux acides

Grafična tehnologija - Odtisi in tiskarske barve - Ugotavljanje odpornosti odtisov na kisline

General Information

• Status: Withdrawn
• Publication Date: 31-May-1997
• Withdrawal Date: 30-Nov-2004
• ICS: 87.080 - Inks. Printing inks
• Technical Committee: GRT - Graphical technology
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 01-Dec-2004
• Due Date: 01-Dec-2004
• Completion Date: 01-Dec-2004
• Ref Project: ISO 11628:1995 - Graphic technology — Prints and printing inks — Determination of resistance of prints to acids

Relations

• Revised: ISO 2836:2004 - Graphic technology — Prints and printing inks — Assessment of resistance of prints to various agents
• Effective Date: 12-May-2008

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 11628
First edition
1995-05-15
Graphit technology - Prints and printing
inks - Determination of resistance of
prints to acids
- Impressions et encres d ’impr-imerie -
Technologie graphique
Determination de Ia rbsistance des impressions aux acides
Reference number
ISO 11628:1995(E)

---------------------- Page: 1 ----------------------
ISO 11628:1995(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 11628 was prepared by Technical Committee
I SO/rC 130, Graphit technology.
Annex A of this International Standard is for information only.
0 ISO 1995
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronrc or mechanical, rncluding photocopyrng and
microfilm, without Permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-121 1 Geneve 20 l Switzerland
Printed In Switzerland

---------------------- Page: 2 ----------------------
0 ISO ISO 11628:1995(E)
Introduction
This International Standard is in technical conformity with CEI specification
18-77 of the European Committee of the Paint and Printing Manufacturers’
Associations.

---------------------- Page: 3 ----------------------
This page intentionally left blank

---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD 0 ISO ISO 11628:1995(E)
- Prints and printing inks -
Graphit technology
Determination of resistance of prints to acids
4 Principle
1 Scope
The print is pressed between two sheets of filter
This International Standard specifies a method for as-
Paper previously wetted by a solution of the relevant
sessing the resistance of prints to acids.
acid.
lt is applicable to all printing processes and all printing
An assessment is made of any changes to the print
Substrates such as Paper, board, plastics and metals
and any bleeding of the colour onto the filter Paper.
(thin metal sheets and plate).
NOTES
2 Normative reference
2 The type and concentration of the acid and the duration
of exposure are not standardized, but should be Chosen ac-
The following Standard contains provisions which,
cording to the intended application of the print. Annex A
through reference in this text, constitute provisions
gives a list of commonly used types, concentrations and
of this International Standard. At the time of publi-
exposure durations.
cation, the edition indicated was valid. All Standards
3 The test Sample includes both printing ink and Substrate,
are subject to revision, and Parties to agreements
because resistance may be affected by ink, Substrate or the
based on this International Standard are encouraged
interaction between them. Test samples may be taken from
to investigate the possibility of applying the most re-
existing printed material, or may be prepared to be rep-
cent edition of the Standard indicated below. Mem-
resentative of a planned printed product.
bers of IEC and ISO maintain registers of currently
valid International Standards.
5 Apparatus and reagents
BS0 105-A03:1993, Textiles - Tests for colour fast-
ness - Part A03: Grey scale for assesshg staining.
5.1 White laboratory filter Paper, for Chemical
analysis, with a very smooth and soft surface. The
size of the Strips of filter Paper should be
3 Definition
60 mm x 90 mm.
For the purposes of this International Standard, the
5.2 Reference and test samples.
following definition applies.
3.1 resistance of prints to acids: Res
...

SLOVENSKI STANDARD
SIST ISO 11628:1997
01-junij-1997
*UDILþQDWHKQRORJLMD2GWLVLLQWLVNDUVNHEDUYH8JRWDYOMDQMHRGSRUQRVWLRGWLVRY
QDNLVOLQH
Graphic technology -- Prints and printing inks -- Determination of resistance of prints to
acids
Technologie graphique -- Impressions et encres d'imprimerie -- Détermination de la
résistance des impressions aux acides
Ta slovenski standard je istoveten z: ISO 11628:1995
ICS:
87.080 Barvila. Tiskarske barve Inks. Printing inks
SIST ISO 11628:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 11628:1997

---------------------- Page: 2 ----------------------

SIST ISO 11628:1997
INTERNATIONAL ISO
STANDARD 11628
First edition
1995-05-15
Graphit technology - Prints and printing
inks - Determination of resistance of
prints to acids
- Impressions et encres d ’impr-imerie -
Technologie graphique
Determination de Ia rbsistance des impressions aux acides
Reference number
ISO 11628:1995(E)

---------------------- Page: 3 ----------------------

SIST ISO 11628:1997
ISO 11628:1995(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 11628 was prepared by Technical Committee
I SO/rC 130, Graphit technology.
Annex A of this International Standard is for information only.
0 ISO 1995
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronrc or mechanical, rncluding photocopyrng and
microfilm, without Permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-121 1 Geneve 20 l Switzerland
Printed In Switzerland

---------------------- Page: 4 ----------------------

SIST ISO 11628:1997
0 ISO ISO 11628:1995(E)
Introduction
This International Standard is in technical conformity with CEI specification
18-77 of the European Committee of the Paint and Printing Manufacturers’
Associations.

---------------------- Page: 5 ----------------------

SIST ISO 11628:1997
This page intentionally left blank

---------------------- Page: 6 ----------------------

SIST ISO 11628:1997
INTERNATIONAL STANDARD 0 ISO ISO 11628:1995(E)
- Prints and printing inks -
Graphit technology
Determination of resistance of prints to acids
4 Principle
1 Scope
The print is pressed between two sheets of filter
This International Standard specifies a method for as-
Paper previously wetted by a solution of the relevant
sessing the resistance of prints to acids.
acid.
lt is applicable to all printing processes and all printing
An assessment is made of any changes to the print
Substrates such as Paper, board, plastics and metals
and any bleeding of the colour onto the filter Paper.
(thin metal sheets and plate).
NOTES
2 Normative reference
2 The type and concentration of the acid and the duration
of exposure are not standardized, but should be Chosen ac-
The following Standard contains provisions which,
cording to the intended application of the print. Annex A
through reference in this text, constitute provisions
gives a list of commonly used types, concentrations and
of this International Standard. At the time of publi-
exposure durations.
cation, the edition indicated was valid. All Standards
3 The test Sample includes both printing ink and Substrate,
are subject to revision, and Parties to agreements
because resistance may be affected by ink, Substrate or the
based on this International Standard are encouraged
interaction between them. Test samples may be taken from
to investigate the possibility of applying the most re-
existing printed material, or may be prepared to be rep-
cent edition of the Standard indicated below. Mem-
resentative of a planned printed product.
bers of IEC a
...