Electromagnetic compatibility and Radio spectrum Matters (ERM); Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands (for non-GMDSS applications only); Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

The present document states the minimum technical characteristics and methods of measurement required for portable Very High Frequency (VHF) radiotelephones not providing maritime distress and safety communications functions (i.e. not forming part of the Global Maritime Distress and Safety System (GMDSS)) operating in certain frequency bands allocated to the maritime mobile service using both 25 kHz and 12,5 kHz channels. The present document is intended to cover the provisions of Directive 1999/5/EC [1] (R&TTE Directive) Article 3.2, which states that "… radio equipment shall be so constructed that it effectively uses the spectrum allocated to
terrestrial/space radio communications and orbital resources so as to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of Article 3 of the R&TTE Directive [1] may apply to equipment within the scope of the present
document.

Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) – Prenosne radiotelefonske naprave VHF za pomorske mobilne storitve, ki delujejo v pasovih VHF (samo za uporabo zunaj GMDSS) - 2. del: Harmonizirani EN, ki zajema bistvene zahteve člena 3.2 direktive R&TTE

General Information

Status
Published
Publication Date
28-Feb-2007
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Mar-2007
Due Date
01-Mar-2007
Completion Date
01-Mar-2007
Mandate

Relations

Buy Standard

Standard
EN 301 178-2 V1.2.2:2007
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 301 178-2 V1.2.2:2007
01-marec-2007
(OHNWURPDJQHWQD]GUXåOMLYRVWLQ]DGHYHY]YH]L]UDGLMVNLPVSHNWURP (50 ±
NLGHOXMHMRY3UHQRVQHUDGLRWHOHIRQVNHQDSUDYH9+)]DSRPRUVNHPRELOQHVWRULWYH
SDVRYLK9+) VDPR]DXSRUDER]XQDM*0'66 GHO+DUPRQL]LUDQL(1NL]DMHPD
ELVWYHQH]DKWHYHþOHQDGLUHNWLYH5 77(
Electromagnetic compatibility and Radio spectrum Matters (ERM); Portable Very High
Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in
the VHF bands (for non-GMDSS applications only); Part 2: Harmonized EN covering
essential requirements of article 3.2 of the R&TTE Directive
Ta slovenski standard je istoveten z: EN 301 178-2 Version 1.2.2
ICS:
33.060.99 Druga oprema za radijske Other equipment for
komunikacije radiocommunications
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
47.020.70 Navigacijska in krmilna Navigation and control
oprema equipment
SIST EN 301 178-2 V1.2.2:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 301 178-2 V1.2.2:2007

---------------------- Page: 2 ----------------------

SIST EN 301 178-2 V1.2.2:2007

ETSI EN 301 178-2 V1.2.2 (2007-02)
Harmonized European Standard (Telecommunications series)

Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Portable Very High Frequency (VHF) radiotelephone
equipment for the maritime mobile service operating
in the VHF bands (for non-GMDSS applications only);
Part 2: Harmonized EN covering essential requirements
of article 3.2 of the R&TTE Directive

---------------------- Page: 3 ----------------------

SIST EN 301 178-2 V1.2.2:2007
 2 ETSI EN 301 178-2 V1.2.2 (2007-02)



Reference
REN/ERM-TG26-075-2
Keywords
maritime, radio, regulation, VHF
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2007.
All rights reserved.

TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 301 178-2 V1.2.2:2007
 3 ETSI EN 301 178-2 V1.2.2 (2007-02)
Contents
Intellectual Property Rights.5
Foreword.5
1 Scope.6
2 References.6
3 Definitions and abbreviations.7
3.1 Definitions.7
3.2 Abbreviations.7
4 Technical requirements specifications.7
4.1 Environmental profile.7
4.2 Conformance requirements.7
4.2.1 Transmitter frequency error .7
4.2.1.1 Definition.7
4.2.1.2 Limit.7
4.2.1.3 Conformance.7
4.2.2 Transmitter carrier power .8
4.2.2.1 Definition.8
4.2.2.2 Limit.8
4.2.2.3 Conformance.8
4.2.3 Transmitter frequency deviation.8
4.2.3.1 Definition.8
4.2.3.2 Limit.8
4.2.3.3 Conformance.8
4.2.4 Transmitter adjacent channel power .8
4.2.4.1 Definition.8
4.2.4.2 Limit.8
4.2.4.3 Conformance.8
4.2.5 Transmitter conducted spurious emissions conveyed to the antenna.8
4.2.5.1 Definition.8
4.2.5.2 Limit.8
4.2.5.3 Conformance.8
4.2.6 Transmitter cabinet radiation and conducted spurious emissions other than those conveyed to the
antenna.9
4.2.6.1 Definition.9
4.2.6.2 Limit.9
4.2.6.3 Conformance.9
4.2.7 Transient frequency behaviour of the transmitter .9
4.2.7.1 Definition.9
4.2.7.2 Limit.9
4.2.7.3 Conformance.9
4.2.8 Receiver maximum usable sensitivity .9
4.2.8.1 Definition.9
4.2.8.2 Limit.9
4.2.8.3 Conformance.9
4.2.9 Receiver co-channel rejection.9
4.2.9.1 Definition.9
4.2.9.2 Limit.9
4.2.9.3 Conformance.10
4.2.10 Receiver adjacent channel selectivity .10
4.2.10.1 Definition.10
4.2.10.2 Limit.10
4.2.10.3 Conformance.10
4.2.11 Receiver spurious response rejection.10
4.2.11.1 Definition.10
4.2.11.2 Limit.10
ETSI

---------------------- Page: 5 ----------------------

SIST EN 301 178-2 V1.2.2:2007
 4 ETSI EN 301 178-2 V1.2.2 (2007-02)
4.2.11.3 Conformance.10
4.2.12 Receiver intermodulation response.10
4.2.12.1 Definition.10
4.2.12.2 Limit.10
4.2.12.3 Conformance.10
4.2.13 Receiver blocking or desensitization .10
4.2.13.1 Definition.10
4.2.13.2 Limit.10
4.2.13.3 Conformance.11
4.2.14 Receiver conducted spurious emissions.11
4.2.14.1 Definition.11
4.2.14.2 Limit.11
4.2.14.3 Conformance.11
4.2.15 Receiver radiated spurious emissions .11
4.2.15.1 Definition.11
4.2.15.2 Limit.11
4.2.15.3 Conformance.11
5 Testing for compliance with technical requirements.11
5.1 Test conditions, power supply and ambient temperatures.11
5.2 Interpretation of the measurement results .11
5.3 Essential radio test suites.12
5.3.1 Transmitter frequency error .12
5.3.2 Transmitter carrier power .12
5.3.3 Transmitter frequency deviation.12
5.3.4 Transmitter adjacent channel power .12
5.3.5 Transmitter conducted spurious emissions conveyed to the antenna.12
5.3.6 Transmitter cabinet radiation and conducted spurious emissions other than those conveyed to the
antenna.13
5.3.7 Transient frequency behaviour of the transmitter .13
5.4 Other test specifications.13
5.4.1 General.13
5.4.2 Receiver maximum usable sensitivity .13
5.4.3 Receiver co-channel rejection.13
5.4.4 Receiver adjacent channel selectivity .13
5.4.5 Receiver spurious response rejection.13
5.4.6 Receiver intermodulation response.13
5.4.7 Receiver blocking or desensitization .13
5.4.8 Receiver conducted spurious emissions.13
5.4.9 Receiver radiated spurious emissions .14
Annex A (normative): HS Requirement and conformance Test specifications Table (HS-
RTT).15
Annex B (informative): The EN title in the official languages .18
Annex C (informative): Bibliography.20
History .21

ETSI

---------------------- Page: 6 ----------------------

SIST EN 301 178-2 V1.2.2:2007
 5 ETSI EN 301 178-2 V1.2.2 (2007-02)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [6] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC [1] of the European Parliament and
of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive").
The present document is part 2 of a multi-part deliverable covering the Electromagnetic compatibility and Radio
spectrum Matters (ERM);Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile
service operating in the VHF bands (for non-GMDSS applications only), as identified below:
Part 1: "Technical characteristics and methods of measurement";
Part 2: "Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive".

National transposition dates
Date of adoption of this EN: 26 January 2007
Date of latest announcement of this EN (doa): 30 April 2007
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 October 2007
Date of withdrawal of any conflicting National Standard (dow): 31 October 2008

ETSI

---------------------- Page: 7 ----------------------

SIST EN 301 178-2 V1.2.2:2007
 6 ETSI EN 301 178-2 V1.2.2 (2007-02)
1 Scope
The present document states the minimum technical characteristics and methods of measurement required for portable
Very High Frequency (VHF) radiotelephones not providing maritime distress and safety communications functions
(i.e. not forming part of the Global Maritime Distress and Safety System (GMDSS)) operating in certain frequency
bands allocated to the maritime mobile service using both 25 kHz and 12,5 kHz channels.
The present document is intended to cover the provisions of Directive 1999/5/EC [1] (R&TTE Directive) Article 3.2,
which states that "… radio equipment shall be so constructed that it effectively uses the spectrum allocated to
terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of Article 3 of the R&TTE Directive [1] may apply to equipment within the scope of the present
document.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
For a specific reference, subsequent revisions do not apply.
For a non-specific reference, the latest version applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
[1] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio
equipment and telecommunications terminal equipment and the mutual recognition of their
conformity (R&TTE Directive).
[2] Void.
[3] Void.
[4] ETSI EN 301 178-1 (V1.3.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service
operating in the VHF bands (for non-GMDSS applications only); Part 1: Technical characteristics
and methods of measurement".
[5] ETSI TR 100 028 series (V1.4.1): "Electromagnetic compatibility and Radio spectrum Matters
(ERM); Uncertainties in the measurement of mobile radio equipment characteristics".
[6] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a
procedure for the provision of information in the field of technical standards and regulations.
ETSI

---------------------- Page: 8 ----------------------

SIST EN 301 178-2 V1.2.2:2007
 7 ETSI EN 301 178-2 V1.2.2 (2007-02)
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in the R&TTE Directive [1] and the following
apply:
environmental profile: range of environmental conditions under which equipment within the scope of the present
document is required to comply with the provisions of the present document
supplier: entity referred to in the R&TTE Directive [1] responsible for the placing on the market of an equipment
within the scope of the Directive
3.2 Abbreviations
For the purposes of the present document, the following abbreviations apply:
EMC Electro-Magnetic Compatibility
emf electromotive force
GMDSS Global Maritime Distress and Safety System
LV Low Voltage
R&TTE Radio and Telecommunications Terminal Equipment
VHF Very High Frequency
4 Technical requirements specifications
4.1 Environmental profile
Tests defined in the present document shall be carried out at representative points within the boundary limits of the
declared operational environmental profile which, as a minimum, shall be that specified in the test conditions contained
in the present document.
As technical performance varies subject to environmental conditions, tests shall be carried out under a sufficient variety
of environmental conditions as specified in the present document to give confidence of compliance for the affected
technical requirements (which shall also be within the boundary limits of the declared operational environmental
profile).
4.2 Conformance requirements
4.2.1 Transmitter frequency error
4.2.1.1 Definition
The transmitter frequency error shall be as defined in EN 301 178-1 [4], clause 8.1.1.
4.2.1.2 Limit
The transmitter frequency error limit shall be as stated in EN 301 178-1 [4], clause 8.1.3.
4.2.1.3 Conformance
Conformance tests as defined in clause 5.3.1 shall be carried out.
ETSI

---------------------- Page: 9 ----------------------

SIST EN 301 178-2 V1.2.2:2007
 8 ETSI EN 301 178-2 V1.2.2 (2007-02)
4.2.2 Transmitter carrier power
4.2.2.1 Definition
The transmitter carrier power shall be as defined in EN 301 178-1 [4], clause 8.2.1.
4.2.2.2 Limit
The transmitter carrier power limit shall be as stated in EN 301 178-1 [4], clause 8.2.3.
4.2.2.3 Conformance
Conformance tests as defined in clause 5.3.2 shall be carried out.
4.2.3 Transmitter frequency deviation
4.2.3.1 Definition
The transmitter frequency deviation shall be as defined in EN 301 178-1 [4], clause 8.3.1.
4.2.3.2 Limit
The transmitter frequency deviation limit shall be as stated in EN 301 178-1 [4], clause 8.3.3.
4.2.3.3 Conformance
Conformance tests as defined in clause 5.3.3 shall be carried out.
4.2.4 Transmitter adjacent channel power
4.2.4.1 Definition
The transmitter adjacent channel power shall be as defined in EN 301 178-1 [4], clause 8.7.1.
4.2.4.2 Limit
The transmitter adjacent channel power limit shall be as stated in EN 301 178-1 [4], clause 8.7.3.
4.2.4.3 Conformance
Conformance tests as defined in clause 5.3.4 shall be carried out.
4.2.5 Transmitter conducted spurious emissions conveyed to the antenna
4.2.5.1 Definition
The transmitter conducted spurious emissions conveyed to the antenna shall be as defined in EN 301 178-1 [4],
clause 8.8.1.
4.2.5.2 Limit
The transmitter conducted emissions conveyed to the antenna limit shall be as stated in EN 301 178-1 [4], clause 8.8.3.
4.2.5.3 Conformance
Conformance tests as defined in clause 5.3.5 shall be carried out.
ETSI

---------------------- Page: 10 ----------------------

SIST EN 301 178-2 V1.2.2:2007
 9 ETSI EN 301 178-2 V1.2.2 (2007-02)
4.2.6 Transmitter cabinet radiation and conducted spurious emissions
other than those conveyed to the antenna
4.2.6.1 Definition
The transmitter cabinet radiation and conducted spurious emissions other than those conveyed to the antenna shall be as
defined in EN 301 178-1 [4], clause 8.9.1.
4.2.6.2 Limit
The transmitter cabinet radiation and conducted spurious emissions other than those conveyed to the antenna limit shall
be as stated in EN 301 178-1 [4], clause 8.9.3.
4.2.6.3 Conformance
Conformance tests as defined in clause 5.3.6 shall be carried out.
4.2.7 Transient frequency behaviour of the transmitter
4.2.7.1 Definition
The transient frequency behaviour of the transmitter shall be as defined in EN 301 178-1 [4], clause 8.11.1.
4.2.7.2 Limit
The transmitter frequency behaviour of the transmitter limit shall be as stated in EN 301 178-1 [4], clause 8.11.3.
4.2.7.3 Conformance
Conformance tests as defined in clause 5.3.7 shall be carried out.
4.2.8 Receiver maximum usable sensitivity
4.2.8.1 Definition
The receiver maximum usable sensitivity shall be as defined in EN 301 178-1 [4], clause 9.3.1.
4.2.8.2 Limit
The receiver maximum usable sensitivity limit shall be as stated in EN 301 178-1 [4], clause 9.3.3.
4.2.8.3 Conformance
Conformance tests as defined in clause 5.4.2 may be carried out.
4.2.9 Receiver co-channel rejection
4.2.9.1 Definition
The receiver co-channel rejection shall be as defined in EN 301 178-1 [4], clause 9.4.1.
4.2.9
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.