SIST EN 301 178 V2.1.1:2016

Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands (for non-GMDSS applications only) - Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU

The present document states the minimum technical characteristics and methods of measurement required for portable
Very High Frequency (VHF) radiotelephones not providing maritime distress and safety communications functions
(i.e. not forming part of the Global Maritime Distress and Safety System (GMDSS)) operating in certain frequency
bands allocated to the maritime mobile service using either 25 kHz or 25 kHz and 12,5 kHz channels.
The present document also specifies technical characteristics, methods of measurement and required test results.
The present document contains requirements to demonstrate that "... Radio equipment shall be so constructed that it both
effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference" [i.2] and that
"....radio equipment supports certain features ensuring access to emergency services" [i.2].

Prenosne radiotelefonske naprave VHF za pomorsko mobilno službo, ki delujejo v območju VHF (samo za uporabo zunaj GMDSS) - Harmonizirani standard, ki zajema bistvene zahteve člena 3.2 direktive 2014/53/EU

Ta dokument navaja minimalne tehnične karakteristike in merilne metode za prenosne radiotelefone VHF, ki ne zagotavljajo funkcij pomorske zasilne in varnostne komunikacije (tj. niso del globalnega pomorskega zasilnega in varnostnega sistema (GMDSS)) in delujejo v določenih frekvenčnih pasovih, dodeljenih pomorskim mobilnim storitvam, ki uporabljajo kanale 25 kHz ali 25 kHz in 12,5 kHz. Ta dokument določa tudi tehnične karakteristike, merilne metode in zahtevane rezultate preskusov. Ta dokument zajema zahteve za dokaz, da »... je radijska oprema sestavljena tako, da učinkovito uporablja in tudi podpira učinkovito uporabo radijskega spektra, tako da ne pride do škodljivega motenja« [i.2], ter da »... radijska oprema podpira določene funkcije, ki zagotavljajo dostop do storitev za nujne primere« [i.2].

General Information

• Status: Published
• Publication Date: 21-Jan-2016
• ICS: 33.060.99 - Other equipment for radiocommunications
• ICS: 33.100.01 - Electromagnetic compatibility in general
• ICS: 47.020.70 - Navigation and control equipment
• Technical Committee: MOC - Mobile Communications
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 11-Jan-2016
• Due Date: 17-Mar-2016
• Completion Date: 22-Jan-2016
• Ref Project: ETSI EN 301 178 V2.1.1 (2015-12) - Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands (for non-GMDSS applications only); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.(847.020.70Navigacijska in krmilna opremaNavigation and control equipment33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.99Druga oprema za radijske komunikacijeOther equipment for radiocommunicationsICS:Ta slovenski standard je istoveten z:EN 301 178 V2.1.1SIST EN 301 178 V2.1.1:2016en01-marec-2016SIST EN 301 178 V2.1.1:2016SLOVENSKI
STANDARD



SIST EN 301 178 V2.1.1:2016



ETSI EN 301 178 V2.1.1 (2015-12) Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands (for non-GMDSS applications only); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU
HARMONISED EUROPEAN STANDARD SIST EN 301 178 V2.1.1:2016



ETSI ETSI EN 301 178 V2.1.1 (2015-12) 2
Reference REN/ERM-TG26-138 Keywords maritime, radio, VHF ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: [phone]
Fax: [phone]
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2015. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 301 178 V2.1.1:2016



ETSI ETSI EN 301 178 V2.1.1 (2015-12) 3 Contents Intellectual Property Rights . 7 Foreword . 7 Modal verbs terminology . 7 1 Scope . 8 2 References . 8 2.1 Normative references . 8 2.2 Informative references . 8 3 Definitions, symbols and abbreviations . 9 3.1 Definitions . 9 3.2 Symbols . 9 3.3 Abbreviations . 9 4 General and operational requirements . 10 4.1 Construction . 10 4.2 Controls and indicators . 10 4.3 Microphone and loudspeaker . 11 4.4 Safety precautions . 11 4.5 Labelling. 11 5 Technical requirements specifications . 12 5.1 Environmental profile . 12 5.2 Conformance requirements . 12 5.2.1 Switching time . 12 5.2.2 Class of emission and modulation characteristics . 12 6 General conditions of measurement . 12 6.1 Arrangements for RF connections to the equipment . 12 6.1.1 RF connections to integral antenna equipment . 12 6.1.2 RF connection to equipment with a detachable antenna . 12 6.2 Arrangements for test signals applied to the receiver input . 12 6.3 Squelch . 12 6.4 Normal test modulation . 12 6.5 Artificial antenna . 13 6.6 Arrangements for test signals applied to the transmitter input . 13 6.7 Test channels . 13 6.8 Test conditions, power sources and ambient temperatures . 13 6.8.1 Normal and extreme test conditions. 13 6.8.2 Test power source . 13 6.9 Normal test conditions . 13 6.9.1 Normal temperature and humidity . 13 6.9.2 Normal power sources . 13 6.9.2.1 Battery power source. 13 6.9.2.2 Other power sources . 14 6.10 Extreme test conditions . 14 6.10.0 General . 14 6.10.1 Extreme temperatures . 14 6.10.2 Extreme values of test power sources . 14 6.10.2.1 Battery power source. 14 6.10.2.2 Other power sources . 14 6.11 Procedure for tests at extreme temperatures . 14 7 Environmental tests . 14 7.1 Procedure . 14 7.2 Performance check . 15 7.3 Drop test . 15 7.3.1 Definition . 15 7.3.2 Method of measurement . 15 SIST EN 301 178 V2.1.1:2016



ETSI ETSI EN 301 178 V2.1.1 (2015-12) 4 7.3.3 Requirement . 15 7.4 Temperature tests . 15 7.4.1 Definition . 15 7.4.2 Dry heat . 15 7.4.2.1 Definition . 15 7.4.2.2 Method of measurement . 15 7.4.2.3 Requirement . 16 7.4.3 Damp heat . 16 7.4.3.1 Definition . 16 7.4.3.2 Method of measurement . 16 7.4.3.3 Requirement . 16 7.4.4 Low temperature cycle . 16 7.4.4.1 Definition . 16 7.4.4.2 Method of measurement . 16 7.4.4.3 Requirement . 16 8 Transmitter . 16 8.1 Frequency error . 16 8.1.1 Definition . 16 8.1.2 Method of measurement . 17 8.1.3 Limits . 17 8.2 Carrier power . 17 8.2.1 Definitions . 17 8.2.2 Method of measurement . 17 8.2.3 Limits, Normal and extreme test conditions . 17 8.3 Frequency deviation . 17 8.3.1 Definition . 17 8.3.2 Maximum permissible frequency deviation . 17 8.3.2.1 Method of measurement . 17 8.3.2.2 Limits . 17 8.3.3 Reduction of frequency deviation at modulation frequencies above 3 kHz . 18 8.3.3.1 Method of measurement . 18 8.3.3.2 Limits . 18 8.4 Sensitivity of the modulator, including microphone . 19 8.4.1 Definition . 19 8.4.2 Method of measurement . 19 8.4.3 Limits . 19 8.5 Audio frequency response . 19 8.5.1 Definition . 19 8.5.2 Method of measurement . 19 8.5.3 Limit . 19 8.6 Audio frequency harmonic distortion of the emission. 20 8.6.1 Definition . 20 8.6.2 Method of measurement . 20 8.6.2.1 RF Coupling to the test demodulator . 20 8.6.2.2 Normal test conditions . 20 8.6.2.3 Extreme test conditions . 21 8.6.3 Limits . 21 8.7 Adjacent channel power . 21 8.7.1 Definition . 21 8.7.2 Method of measurement . 21 8.7.3 Limits . 21 8.8 Conducted spurious emissions conveyed to the antenna . 22 8.8.1 Definition . 22 8.8.2 Method of measurement . 22 8.8.3 Limit . 22 8.9 Cabinet radiation and conducted spurious emissions other than those conveyed to the antenna . 22 8.9.1 Definitions . 22 8.9.2 Method of measurement . 22 8.9.3 Limits . 23 8.10 Residual modulation of the transmitter . 23 8.10.1 Definition . 23 SIST EN 301 178 V2.1.1:2016



ETSI ETSI EN 301 178 V2.1.1 (2015-12) 5 8.10.2 Method of measurement . 23 8.10.3 Limit . 24 8.11 Transient frequency behaviour of the transmitter . 24 8.11.1 Definitions . 24 8.11.2 Method of measurement . 24 8.11.3 Limits . 25 9 Receiver . 27 9.1 Harmonic distortion and rated audio frequency output power . 27 9.1.1 Definition . 27 9.1.2 Methods of measurement . 27 9.1.3 Limits . 27 9.2 Audio frequency response . 27 9.2.1 Definition . 27 9.2.2 Method of measurement . 27 9.2.3 Limits . 28 9.3 Maximum usable sensitivity . 28 9.3.1 Definition . 28 9.3.2 Method of measurement . 29 9.3.3 Limits . 29 9.4 Co-channel rejection. 29 9.4.1 Definition . 29 9.4.2 Method of measurement . 29 9.4.3 Limit . 29 9.5 Adjacent channel selectivity . 30 9.5.1 Definition . 30 9.5.2 Method of measurement . 30 9.5.3 Limits . 30 9.6 Spurious response rejection . 30 9.6.1 Definition . 30 9.6.2 Method of measurement . 30 9.6.3 Limit . 31 9.7 Intermodulation response . 31 9.7.1 Definition . 31 9.7.2 Method of measurement . 31 9.7.3 Limit . 31 9.8 Blocking or desensitization . 31 9.8.1 Definition . 31 9.8.2 Method of measurement . 31 9.8.3 Limit . 32 9.9 Conducted spurious emissions . 32 9.9.1 Definition . 32 9.9.2 Method of measurement . 32 9.9.3 Limit . 32 9.10 Radiated spurious emissions. 32 9.10.1 Definition . 32 9.10.2 Method of measurements . 32 9.10.3 Limit . 33 9.11 Receiver noise and hum level . 33 9.11.1 Definition . 33 9.11.2 Method of measurement . 33 9.11.3 Limit . 34 9.12 Squelch operation . 34 9.12.1 Defi
...

Draft ETSI EN 301 178 V2.1.0 (2015-09)






HARMONISED EUROPEAN STANDARD
Portable Very High Frequency (VHF) radiotelephone equipment
for the maritime mobile service operating in the VHF bands
(for non-GMDSS applications only);
Harmonised Standard covering the essential requirements
of article 3.2 of the Directive 2014/53/EU

---------------------- Page: 1 ----------------------
2 Draft ETSI EN 301 178 V2.1.0 (2015-09)



Reference
REN/ERM-TG26-138
Keywords
maritime, radio, VHF
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2015.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 Draft ETSI EN 301 178 V2.1.0 (2015-09)
Contents
Intellectual Property Rights . 7
Foreword . 7
Modal verbs terminology . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 8
3 Definitions, symbols and abbreviations . 9
3.1 Definitions . 9
3.2 Symbols . 9
3.3 Abbreviations . 9
4 General and operational requirements . 10
4.1 Construction . 10
4.2 Controls and indicators . 10
4.3 Microphone and loudspeaker . 11
4.4 Safety precautions . 11
4.5 Labelling. 11
5 Technical requirements specifications . 12
5.1 Environmental profile . 12
5.2 Conformance requirements . 12
5.2.1 Switching time . 12
5.2.2 Class of emission and modulation characteristics . 12
6 General conditions of measurement . 12
6.1 Arrangements for RF connections to the equipment . 12
6.1.1 RF connections to integral antenna equipment . 12
6.1.2 RF connection to equipment with a detachable antenna . 12
6.2 Arrangements for test signals applied to the receiver input . 12
6.3 Squelch . 12
6.4 Normal test modulation . 12
6.5 Artificial antenna . 13
6.6 Arrangements for test signals applied to the transmitter input . 13
6.7 Test channels . 13
6.8 Test conditions, power sources and ambient te mperat ures . 13
6.8.1 Normal and extreme test conditions. 13
6.8.2 Test power source . 13
6.9 Normal test conditions . 13
6.9.1 Normal temperature and humidity . 13
6.9.2 Normal power sources . 13
6.9.2.1 Battery power source. 13
6.9.2.2 Other power sources . 14
6.10 Extreme test conditions . 14
6.10.0 General . 14
6.10.1 Extreme temperatures . 14
6.10.2 Extreme values of test power sources . 14
6.10.2.1 Battery power source. 14
6.10.2.2 Other power sources . 14
6.11 Procedure for tests at extreme temperatures . 14
7 Environmental tests . 14
7.1 Procedure . 14
7.2 Performance check . 15
7.3 Drop test . 15
7.3.1 Definition . 15
7.3.2 Method of measurement . 15
ETSI

---------------------- Page: 3 ----------------------
4 Draft ETSI EN 301 178 V2.1.0 (2015-09)
7.3.3 Requirement . 15
7.4 Temperature tests . 15
7.4.1 Definition . 15
7.4.2 Dry heat . 15
7.4.2.1 Definition . 15
7.4.2.2 Method of measurement . 15
7.4.2.3 Requirement . 16
7.4.3 Damp heat . 16
7.4.3.1 Definition . 16
7.4.3.2 Method of measurement . 16
7.4.3.3 Requirement . 16
7.4.4 Low temperature cycle . 16
7.4.4.1 Definition . 16
7.4.4.2 Method of measurement . 16
7.4.4.3 Requirement . 16
8 Transmitter . 16
8.1 Frequency error . 16
8.1.1 Definition . 16
8.1.2 Method of measurement . 17
8.1.3 Limits . 17
8.2 Carrier power . 17
8.2.1 Definitions . 17
8.2.2 Method of measurement . 17
8.2.3 Limits, Normal and extreme test conditions . 17
8.3 Frequency deviation . 17
8.3.1 Definition . 17
8.3.2 Maximum permissible frequency deviation . 17
8.3.2.1 Method of measurement . 17
8.3.2.2 Limits . 17
8.3.3 Reduction of frequency deviation at modulation frequencies above 3 kHz . 18
8.3.3.1 Method of measurement . 18
8.3.3.2 Limits . 18
8.4 Sensitivity of the modulator, including microphone . 19
8.4.1 Definition . 19
8.4.2 Method of measurement . 19
8.4.3 Limits . 19
8.5 Audio frequency response . 19
8.5.1 Definition . 19
8.5.2 Method of measurement . 19
8.5.3 Limit . 19
8.6 Audio frequency harmonic distortion of the emission. 20
8.6.1 Definition . 20
8.6.2 Method of measurement . 20
8.6.2.1 RF Coupling to the test demodulator . 20
8.6.2.2 Normal test conditions . 20
8.6.2.3 Extreme test conditions . 21
8.6.3 Limits . 21
8.7 Adjacent channel power . 21
8.7.1 Definition . 21
8.7.2 Method of measurement . 21
8.7.3 Limits . 21
8.8 Conducted spurious emissions conveyed to the antenna . 22
8.8.1 Definition . 22
8.8.2 Method of measurement . 22
8.8.3 Limit . 22
8.9 Cabinet radiation and conducted spurious emissions other than those conveyed to the antenna . 22
8.9.1 Definitions . 22
8.9.2 Method of measurement . 22
8.9.3 Limits . 23
8.10 Residual modulation of the transmitter . 23
8.10.1 Definition . 23
ETSI

---------------------- Page: 4 ----------------------
5 Draft ETSI EN 301 178 V2.1.0 (2015-09)
8.10.2 Method of measurement . 23
8.10.3 Limit . 24
8.11 Transient frequency behaviour of the transmitter . 24
8.11.1 Definitions . 24
8.11.2 Method of measurement . 24
8.11.3 Limits . 25
9 Receiver . 27
9.1 Harmonic distortion and rated audio frequency output power . 27
9.1.1 Definition . 27
9.1.2 Methods of measurement . 27
9.1.3 Limits . 27
9.2 Audio frequency response . 27
9.2.1 Definition . 27
9.2.2 Method of measurement . 27
9.2.3 Limits . 28
9.3 Maximum usable sensitivity . 28
9.3.1 Definition . 28
9.3.2 Method of measurement . 29
9.3.3 Limits . 29
9.4 Co-channel rejection. 29
9.4.1 Definition . 29
9.4.2 Method of measurement . 29
9.4.3 Limit . 29
9.5 Adjacent channel selectivity . 30
9.5.1 Definition . 30
9.5.2 Method of measurement . 30
9.5.3 Limits . 30
9.6 Spurious response rejection . 30
9.6.1 Definition . 30
9.6.2 Method of measurement . 30
9.6.3 Limit . 31
9.7 Intermodulation response . 31
9.7.1 Definition . 31
9.7.2 Method of measurement . 31
9.7.3 Limit . 31
9.8 Blocking or desensitization . 31
9.8.1 Definition . 31
9.8.2 Method of measurement . 31
9.8.3 Limit . 32
9.9 Conducted spurious emissions . 32
9.9.1 Definition . 32
9.9.2 Method of measurement . 32
9.9.3 Limit . 32
9.10 Radiated spurious emissions. 32
9.10.1 Definition . 32
9.10.2 Method of measurements . 32
9.10.3 Limit . 33
9.11 Receiver noise and hum level . 33
9.11.1 Definition . 33
9.11.2 Method of measurement . 33
9.11.3 Limit . 34
9.12 Squelch operation . 34
9.12.1 Definition .
...