This standard has one common requirements part plus specific parts for each of the radio equipment and services.  This harmonised standard under the EMC Directive and article 3.1b of the R&TTE Dirctive.  This does not include EMC requirements for equipment covered by the Marine Equipment Directive. This revision conatins additions and changes in order to cover the changes coming from the revisions of the DECT standards.
The present document, together with EN 301 489-1 [1], covers the assessment of Digital Enhanced Cordless Telecommunications (DECT) equipment, and associated ancillary equipment, in respect of ElectroMagnetic Compatibility (EMC).
Technical specifications related to the antenna port and emissions from the enclosure port of the radio equipment are not included in the present document. Such technical specifications are found in the relevant product standards for the effective use of the radio spectrum.
The present document specifies the applicable test conditions, performance assessment and performance criteria for Digital Enhanced Cordless Telecommunications (DECT) equipment, and associated ancillary equipment.
Definitions of types of cordless telecommunications equipment covered by the present document are given in annex A. In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present document and EN 301 489-1 [1], the provisions of the present document take precedence. The environmental classification and the emission and immunity requirements used in the present document are as stated in EN 301 489-1 [1], except for any special conditions included in the present document.

Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) - Standard elektromagnetne združljivosti (EMC) za radijsko opremo in storitve - 6. del: Posebni pogoji za opremo digitalnih izboljšanih brezvrvičnih telekomunikacij (DECT)

General Information

Status
Published
Publication Date
22-Oct-2008
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
03-Oct-2008
Due Date
08-Dec-2008
Completion Date
23-Oct-2008
Mandate

RELATIONS

Buy Standard

Standard
SIST EN 301 489-6 V1.3.1:2008
English language
18 pages
sale - 10%
Preview
sale - 10%
Preview

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.'(&7Electromagnetic compatibility and Radio spectrum Matters (ERM) - ElectroMagnetic Compatibility (EMC) standard for radio equipment and services - Part 6: Specific conditions for Digital Enhanced Cordless Telecommunications (DECT) equipment33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.070.30'(&7Digital Enhanced Cordless Telecommunications (DECT)33.060.01Radijske komunikacije na splošnoRadiocommunications in generalICS:Ta slovenski standard je istoveten z:EN 301 489-6 Version 1.3.1SIST EN 301 489-6 V1.3.1:2008en01-december-2008SIST EN 301 489-6 V1.3.1:2008SLOVENSKI

STANDARD
SIST EN 301 489-6 V1.3.1:2008

ETSI EN 301 489-6 V1.3.1 (2008-08)Harmonized European Standard (Telecommunications series) Electromagnetic compatibilityand Radio spectrum Matters (ERM);ElectroMagnetic Compatibility (EMC)standard for radio equipment and services;Part 6: Specific conditions for Digital Enhanced CordlessTelecommunications (DECT) equipment

SIST EN 301 489-6 V1.3.1:2008
ETSI ETSI EN 301 489-6 V1.3.1 (2008-08) 2

Reference REN/ERM-EMC-265-6 Keywords DECT, EMC, radio, regulation ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88

Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2008. All rights reserved.

DECTTM, PLUGTESTSTM, UMTSTM, TIPHONTM, the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. SIST EN 301 489-6 V1.3.1:2008

ETSI ETSI EN 301 489-6 V1.3.1 (2008-08) 3

Contents Intellectual Property Rights................................................................................................................................5 Foreword.............................................................................................................................................................5 1 Scope........................................................................................................................................................6 2 References................................................................................................................................................6 2.1 Normative references.........................................................................................................................................6 2.2 Informative references........................................................................................................................................7 3 Definitions and abbreviations...................................................................................................................7 3.1 Definitions..........................................................................................................................................................7 3.2 Abbreviations.....................................................................................................................................................7 4 Test conditions.........................................................................................................................................8 4.1 General...............................................................................................................................................................8 4.2 Arrangements for test signals.............................................................................................................................8 4.2.1 Arrangements for test signals at the input of transmitters.............................................................................8 4.2.1.1 Speech equipment...................................................................................................................................8 4.2.1.2 Non-speech equipment............................................................................................................................8 4.2.2 Arrangements for test signals at the output of transmitters...........................................................................8 4.2.3 Arrangements for test signals at the input of receivers.................................................................................8 4.2.4 Arrangements for test signals at the output of receivers...............................................................................8 4.2.5 Arrangements for testing transmitter and receiver together (as a system)....................................................9 4.3 Exclusion bands..................................................................................................................................................9 4.4 Narrow band responses on receivers or receivers which are part of transceivers...............................................9 4.5 Normal test modulation......................................................................................................................................9 5 Performance assessment.........................................................................................................................10 5.1 General.............................................................................................................................................................10 5.2 Arrangements for the assessment of host dependant equipment and plug-in cards..........................................10 5.2.1 Alternative A: composite equipment..........................................................................................................10 5.2.2 Alternative B: use of a test jig and three hosts............................................................................................10 5.3 Assessment procedures.....................................................................................................................................11 5.3.1 Loss of user control functions or stored user defined data..........................................................................11 5.3.2 Audio breakthrough....................................................................................................................................11 5.4 Ancillary equipment.........................................................................................................................................12 5.5 Equipment classification..................................................................................................................................12 6 Performance criteria...............................................................................................................................12 6.1 General.............................................................................................................................................................12 6.2 Performance criteria for Continuous phenomena of Transceivers (CT)...........................................................13 6.3 Performance criteria for Transient phenomena applied to Transceivers (TT)..................................................13 6.4 Performance criteria for Continuous phenomena applied to Receive-only equipment (CR)...........................13 6.5 Performance criteria for Transient phenomena applied to Receive-only equipment (TR)...............................14 6.6 Performance criteria for ancillary equipment tested on a stand alone basis.....................................................14 7 Applicability overview...........................................................................................................................14 7.1 Emission...........................................................................................................................................................14 7.1.1 General........................................................................................................................................................14 7.1.2 Special conditions.......................................................................................................................................14 7.2 Immunity..........................................................................................................................................................14 7.2.1 General........................................................................................................................................................14 7.2.2 Special conditions.......................................................................................................................................14 Annex A (normative): Definitions of cordless telecommunications equipment in the scope of the present document.....................................................................................15 A.1 Digital Enhanced Cordless Telecommunications (DECT) equipment...................................................15 Annex B (informative): The EN title in the official languages...........................................................16 SIST EN 301 489-6 V1.3.1:2008

ETSI ETSI EN 301 489-6 V1.3.1 (2008-08) 4

Annex C (informative): Bibliography...................................................................................................17 History..............................................................................................................................................................18

SIST EN 301 489-6 V1.3.1:2008
ETSI ETSI EN 301 489-6 V1.3.1 (2008-08) 5

Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/34/EC [i.2] (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations. The present document is intended to become a Harmonized Standard, the reference of which will be published in the Official Journal of the European Communities referencing the Directive 1999/5/EC [i.1] of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity ("the R&TTE Directive") [i.1]). The present document is part 6 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].

National transposition dates Date of adoption of this EN: 8 August 2008 Date of latest announcement of this EN (doa): 30 November 2008 Date of latest publication of new National Standard or endorsement of this EN (dop/e):

31 May 2009 Date of withdrawal of any conflicting National Standard (dow): 31 May 2010

SIST EN 301 489-6 V1.3.1:2008
ETSI ETSI EN 301 489-6 V1.3.1 (2008-08) 6

1 Scope The present document, together with EN 301 489-1 [1], covers the assessment of Digital Enhanced Cordless Telecommunications (DECT) equipment, and associated ancillary equipment, in respect of ElectroMagnetic Compatibility (EMC). Technical specifications related to the antenna port and emissions from the enclosure port of the radio equipment are not included in the present document. Such technical specifications are found in the relevant product standards for the effective use of the radio spectrum. The present document specifies the applicable test conditions, performance assessment and performance criteria for Digital Enhanced Cordless Telecommunications (DECT) equipment, and associated ancillary equipment.

Definitions of types of cordless telecommunications equipment covered by the present document are given in annex A. In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present document and EN 301 489-1 [1], the provisions of the present document take precedence. The environmental classification and the emission and immunity requirements used in the present document are as stated in EN 301 489-1 [1], except for any special conditions included in the present document. 2 References References are either specific (identified by date of publication and/or edition number or version number) or non-specific. • For a specific reference, subsequent revisions do not apply. • Non-specific reference may be made only to a complete document or a part thereof and only in the following cases:

- if it is accepted that it will be possible to use all future changes of the referenced document for the purposes of the referring document;

- for informative references. Referenced documents which are not found to be publicly available in the expected location might be found at http://docbox.etsi.org/Reference. For online referenced documents, information sufficient to identify and locate the source shall be provided. Preferably, the primary source of the referenced document should be cited, in order to ensure traceability. Furthermore, the reference should, as far as possible, remain valid for the expected life of the document. The reference shall include the method of access to the referenced document and the full network address, with the same punctuation and use of upper case and lower case letters. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents are indispensable for the application of the present document. For dated references, only the edition cited applies. For non-specific references, the latest edition of the referenced document (including any amendments) applies. [1] ETSI EN 301 489-1: "Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;

Part 1: Common technical requirements". [2] ITU-T Recommendation O.153 (1992): "Basic parameters for the measurement of error performance at bit rates below the primary rate". SIST EN 301 489-6 V1.3.1:2008

ETSI ETSI EN 301 489-6 V1.3.1 (2008-08) 7

[3] ETSI EN 300 175-2: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 2: Physical Layer (PHL)". [4] ETSI EN 300 175-3: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 3: Medium Access Control (MAC) Layer". [5] ETSI EN 300 176: "Digital Enhanced Cordless Telecommunications (DECT); Approval test specification". 2.2 Informative references [i.1] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity (R&TTE Directive). [i.2] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a procedure for the provision of information in the field of technical standards and regulations. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in EN 301 489-1 [1] and the following apply: bearer: burst of the wanted RF signal used to establish and maintain the communications link for digital modulated and operated cordless telephone and similar radio communications equipment DECT equipment: Digital Enhanced Cordless Telecommunications apparatus which includes one or more transceivers and/or receivers and/or parts thereof which conform to the requirements of EN 300 175-2 [3] host equipment: any equipment which has a complete user functionality when not connected to the cordless telephone or similar radio communications equipment, and to which this radio equipment provides additional functionality, and to which connection is necessary for this radio equipment to offer functionality, and in which the transceiver part of the radio equipment is physically installed non-speech equipment: cordless telephone or similar communications equipment intended for the provision and reception of digital data either originating from or destined to external digital speech processing circuitry or other external equipment speech equipment: cordless telephone or similar communications equipment containing transducers such as microphones and/or loudspeakers intended for the provision and reception of acoustic audio signals 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: BER Bit Error Ratio BPF Band Pass Filter BW BandWidth CF Carrier Frequency CFP Cordless Fixed Part

CPP Cordless Portable Part CR Continuous phenomena applied to cordless telephone or communication Receive-only equipment CT Continuous phenomena applied to cordless telephone or communication Transceivers DECT Digital Enhanced Cordless Telecommunications ERP Ear Reference Point EUT Equipment Under Test MRP Mouth Reference Point RF Radio Frequency SIST EN 301 489-6 V1.3.1:2008

ETSI ETSI EN 301 489-6 V1.3.1 (2008-08) 8
SPL Sound Pressure Level TR Transient phenomena
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.