SIST EN 301 489-6 V1.4.1:2015

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.'(&7Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 6: Specific conditions for Digital Enhanced Cordless Telecommunications (DECT) equipment33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.070.30'(&7Digital Enhanced Cordless Telecommunications (DECT)33.060.01Radijske komunikacije na splošnoRadiocommunications in generalICS:Ta slovenski standard je istoveten z:EN 301 489-6 V1.4.1SIST EN 301 489-6 V1.4.1:2015en,fr,de01-december-2015SIST EN 301 489-6 V1.4.1:2015SLOVENSKI

ETSI EN 301 489-6 V1.4.1 (2015-05) Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 6: Specific conditions for Digital Enhanced Cordless Telecommunications (DECT) equipment

Reference REN/ERM-EMC-328 Keywords DECT, EMC, radio, regulation ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE

Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88

Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.

DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 301 489-6 V1.4.1:2015

ETSI ETSI EN 301 489-6 V1.4.1 (2015-05) 3 Contents Intellectual Property Rights ................................................................................................................................ 5 Foreword ............................................................................................................................................................. 5 Modal verbs terminology .................................................................................................................................... 5 1 Scope ........................................................................................................................................................ 6 2 References ................................................................................................................................................ 6 2.1 Normative references ......................................................................................................................................... 6 2.2 Informative references ........................................................................................................................................ 6 3 Definitions and abbreviations ................................................................................................................... 7 3.1 Definitions .......................................................................................................................................................... 7 3.2 Abbreviations ..................................................................................................................................................... 7 4 Test conditions ......................................................................................................................................... 8 4.1 General ............................................................................................................................................................... 8 4.2 Arrangements for test signals ............................................................................................................................. 8 4.2.1 Arrangements for test signals at the input of transmitters ............................................................................. 8 4.2.1.1 Speech equipment ................................................................................................................................... 8 4.2.1.2 Non-speech equipment ............................................................................................................................ 8 4.2.2 Arrangements for test signals at the output of transmitters ........................................................................... 8 4.2.3 Arrangements for test signals at the input of receivers ................................................................................. 8 4.2.4 Arrangements for test signals at the output of receivers ............................................................................... 8 4.2.5 Arrangements for testing transmitter and receiver together (as a system) .................................................... 8 4.3 Exclusion bands .................................................................................................................................................. 9 4.4 Narrow band responses on receivers or receivers which are part of transceivers ............................................... 9 4.5 Normal test modulation ...................................................................................................................................... 9 5 Performance assessment ........................................................................................................................... 9 5.1 General ............................................................................................................................................................... 9 5.2 Arrangements for the assessment of host dependant equipment and plug-in cards ............................................ 9 5.2.1 Alternative A: composite equipment .......................................................................................................... 10 5.2.2 Alternative B: use of a test jig and three hosts ............................................................................................ 10 5.3 Assessment procedures ..................................................................................................................................... 10 5.3.1 Loss of user control functions or stored user defined data .......................................................................... 10 5.3.2 Audio breakthrough .................................................................................................................................... 10 5.4 Ancillary equipment ......................................................................................................................................... 11 5.5 Equipment classification .................................................................................................................................. 12 6 Performance criteria ............................................................................................................................... 12 6.1 General ............................................................................................................................................................. 12 6.2 Performance criteria for Continuous phenomena of Transceivers (CT) ........................................................... 12 6.3 Performance criteria for Transient phenomena applied to Transceivers (TT) .................................................. 13 6.4 Performance criteria for Continuous phenomena applied to Receive-only equipment (CR) ........................... 13 6.5 Performance criteria for Transient phenomena applied to Receive-only equipment (TR) ............................... 13 6.6 Performance criteria for ancillary equipment tested on a stand alone basis ..................................................... 13 7 Applicability overview ........................................................................................................................... 13 7.1 Emission ........................................................................................................................................................... 13 7.1.1 General ........................................................................................................................................................ 13 7.1.2 Special conditions ....................................................................................................................................... 13 7.2 Immunity .......................................................................................................................................................... 14 7.2.1 General ........................................................................................................................................................ 14 7.2.2 Special conditions ....................................................................................................................................... 14 Annex A (normative): Definitions of cordless telecommunications equipment in the scope of the present document ..................................................................................... 15 A.1 Digital Enhanced Cordless Telecommunications (DECT) equipment ................................................... 15 SIST EN 301 489-6 V1.4.1:2015

ETSI ETSI EN 301 489-6 V1.4.1 (2015-05) 4 Annex B (informative): Void ................................................................................................................. 16 Annex C (informative): Bibliography ................................................................................................... 17 History .............................................................................................................................................................. 18

ETSI ETSI EN 301 489-6 V1.4.1 (2015-05) 5 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been produced by ETSI in response to mandate M/284 issued from the European Commission under Directive 98/34/EC [i.2] as amended by Directive 98/48/EC [i.3]. The title and reference to the present document are intended to be included in the publication in the Official Journal of the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC [i.1]. The present document is part 6 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].

National transposition dates Date of adoption of this EN: 19 May 2015 Date of latest announcement of this EN (doa): 31 August 2015 Date of latest publication of new National Standard or endorsement of this EN (dop/e):

29 February 2016 Date of withdrawal of any conflicting National Standard (dow): 28 February 2017

Modal verbs terminology In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and "cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). "must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation. SIST EN 301 489-6 V1.4.1:2015

ETSI ETSI EN 301 489-6 V1.4.1 (2015-05) 6 1 Scope The present document, together with ETSI EN 301 489-1 [1], covers the assessment of Digital Enhanced Cordless Telecommunications (DECT) equipment, and associated ancillary equipment, in respect of ElectroMagnetic Compatibility (EMC). Technical specifications related to the antenna port and emissions from the enclosure port of the radio equipment are not included in the present document. Such technical specifications are found in the relevant product standards for the effective use of the radio spectrum. The present document specifies the applicable test conditions, performance assessment and performance criteria for Digital Enhanced Cordless Telecommunications (DECT) equipment, and associated ancillary equipment.

Definitions of types of cordless telecommunications equipment covered by the present document are given in annex A. In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present document and ETSI EN 301 489-1 [1], the provisions of the present document take precedence. The environmental classification and the emission and immunity requirements used in the present document are as stated in ETSI EN 301 489-1 [1], except for any special conditions included in the present document. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http://docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. [1] ETSI EN 301 489-1 (V1.9.2) (09-2011): "Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements". [2] Recommendation ITU-T O.153 (10-1992): "Basic parameters for the measurement of error performance at bit rates below the primary rate". [3] ETSI EN 300 175-2 (V2.5.1) (08-2013): "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 2: Physical Layer (PHL)". [4] ETSI EN 300 175-3 (V2.5.1) (08-2013): "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 3: Medium Access Control (MAC) Layer". [5] ETSI EN 300 176-1 (V2.1.1) (07-2009): "Digital Enhanced Cordless Telecommunications (DECT); Test specification; Part 1: Radio". [6] CENELEC EN 55024 (2010): "Information technology equipment - Immunity characteristics - Limits and methods of measurement". 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. SIST EN 301 489-6 V1.4.1:2015

ETSI ETSI EN 301 489-6 V1.4.1 (2015-05) 7 NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. [i.1] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity (R&TTE Directive). [i.2] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a procedure for the provision of information in the field of technical standards and regulations. [i.3] Directive 98/48/EC of the European Parliament and of the Council of 20 July 1998 amending Directive 98/34/EC laying down a procedure for the provision of information in the field of technical standards and regulations. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in ETSI EN 301 489-1 [1] and the following apply: bearer: burst of the wanted RF signal used to establish and maintain the communications link for digital modulated and operated cordless telephone and similar radio communications equipment DECT equipment: Digital Enhanced Cordless Telecommunications apparatus which includes one or more transceivers and/or receivers and/or parts thereof which conform to the requirements of ETSI EN 300 175-2 [3] host equipment: any equipment which has a complete user functionality when not connected to the cordless telephone or similar radio communications equipment, and to which this radio equipment provides additional functionality, and to which connection is necessary for this radio equipment to offer functionality, and in which the transceiver part of the radio equipment is physically installed non-speech equipment: cordless telephone or similar communications equipment intended for the provision and reception of digital data either originating from or destined to external digital speech processing circuitry or other external equipment speech equipment: cordless telephone or similar communications equipment containing transducers such as microphones and/or loudspeakers intended for the provision and reception of acoustic audio signals 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: AC Alter