HD 22.14 S3:2007

SLOVENSKI STANDARD
SIST HD 22.14 S3:2007
01-junij-2007
1DGRPHãþD
SIST HD 22.14 S2:2003

.DEOL]RPUHåHQRL]RODFLMR]DQD]QDþHQHQDSHWRVWLGRYNOMXþQR9±GHO

Starkstromleitungen mit vernetzter Isolierhülle für Nennspannungen bis 450/750 V – Teil

Conducteurs et câbles isolés avec des matériaux réticulés de tension assignée au plus

égale a 450/750 V – Partie 14: Câbles pour applications nécessitant une flexibilité élevée

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

This Harmonization Document was approved by CENELEC on 2006-12-01. CENELEC members are bound

to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for implementation of

Up-to-date lists and bibliographical references concerning such national implementations may be obtained on

This Harmonization Document exists in three official versions (English, French, German).

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the

Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,

Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia,

© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

This Harmonization Document was prepared by the Technical Committee CENELEC TC 20,

The text of the draft was submitted to the Unique Acceptance Procedure and was approved by

HD 22, Cables of rated voltages up to and including 450/750 V and having cross-linked

HD 22.7 S2 Cables with increased heat resistance for internal wiring for a conductor

HD 22.9 S3 Single core halogen-free non-sheathed cables for fixed wiring having low

1 Scope ..............................................................................................................................4

2 Normative references .....................................................................................................4

3 EPR insulated and sheathed cord for applications requiring high flexibility ..............4

3.1 Code designation ....................................................................................................4

3.2 Rated voltage..........................................................................................................4

3.3 Construction............................................................................................................4

3.4 Tests.......................................................................................................................5

3.5 Guide to use (informative) .......................................................................................5

4 (Spare).............................................................................................................................8

requiring high flexibility.................................................................................................8

5.1 Code designation ....................................................................................................8

5.2 Rated voltage..........................................................................................................8

5.3 Construction............................................................................................................8

5.4 Tests.......................................................................................................................9

5.5 Guide to use (informative) .......................................................................................9

6 EPR insulated and braided cord for applications requiring high flexibility...............11

6.1 Code designation ..................................................................................................11

6.2 Rated voltage........................................................................................................11

6.3 Construction..........................................................................................................11

6.4 Tests.....................................................................................................................12

6.5 Guide to use (informative) .....................................................................................12

Annex A (normative) Requirements for compatibility test ................................................14

Annex B (normative) Measurement of coverage by textile braid ......................................15

Bibliography........................................................................................................................17

Table 1 – Dimensions for type H03RR-H.................................................................................6

Table 2 – Tests for type H03RR-H ..........................................................................................7

Table 3 – Dimensions for type H03V4V4-H .............................................................................9

Table 4 – Tests for type H03V4V4-H.....................................................................................10

Table 5 – Dimensions for type H03RT-H ...............................................................................12

Table 6 – Tests for type H03RT-H.........................................................................................13

Table A.1 – Requirements ....................................................................................................14

Figure B.1 – Textile braid......................................................................................................16

This Part 14 of HD 22 details the particular specifications for EPR insulated and EPR sheathed,

XLPVC insulated and XLPVC sheathed, and EPR insulated and textile braid covered cords of

rated voltage 300/300 V, for use in applications where high flexibility is required.

Each cable shall comply with the appropriate requirements given in Part 1 of this HD and the

NOTE The overall dimensions of the cables in this part of HD 22 have been calculated in accordance with EN 60719.

The following referenced documents are indispensable for the application of this document. For

dated references, only the edition cited applies. For undated references, the latest edition of the

EN 50363-1 Insulating, sheathing and covering materials for low voltage energy cables –

EN 50363-2-1 Insulating, sheathing and covering materials for low voltage energy cables –

EN 50363-9-1 Insulating, sheathing and covering materials for low voltage energy cables –

EN 50363-10-1 Insulating, sheathing and covering materials for low voltage energy cables –

EN 60811 series Insulating and sheathing materials of electric and optical fibre cables –

The conductors shall be in accordance with the requirements given in EN 60228 for Class 6

The insulation shall be an EPR compound of Type EI 4 to EN 50363-1 applied around each

The insulation thickness shall comply with the specified value given in Table 1, column 2.

The sheath shall be an EPR compound of Type EM 3 to EN 50363-2-1, applied around the core

The sheath thickness shall comply with the specified value given in Table 1, column 3.

The sheath shall be extruded and applied in such a way that it fills any spaces between the

The mean overall diameter shall be within the limits given in Table 1, columns 4 and 5.

The cord shall have the marking H03RR-H printed either on the outer surface of the cord, or on

one of the cores. The marking, which shall meet the requirements of Subclauses 3.2 and 3.3 of

NOTE Legibility may be achieved by using contrasting colours, or by contrasting shades of the same colour, in