oSIST prEN ISO 22553-1:2020
(Main)This document defines terms for electro-deposition coatings.
It is applicable to electro-deposition coatings for automotive industries and other general industrial applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.
Beschichtungsstoffe - Elektrotauchlacke - Teil 1: Begriffe (ISO 22553-1:2019)
Peintures et vernis - Peintures d'électrodéposition - Partie 1: Vocabulaire (ISO 22553-1:2019)
Barve in laki - Elektrodepozicijski premazi - 1. del: Slovar (ISO 22553-1:2019)
General Information
Standards Content (sample)
SLOVENSKI STANDARD
oSIST prEN ISO 22553-1:2020
01-september-2020
Barve in laki - Nanašanje premazov z elektrodepozicijo - 1. del: Slovar (ISO 22553-
1:2019)Paints and varnishes - Electro-deposition coatings - Part 1: Vocabulary (ISO 22553-
1:2019)Beschichtungsstoffe - Elektrotauchlacke - Teil 1: Begriffe (ISO 22553-1:2019)
Peintures et vernis - Peintures d'électrodéposition - Partie 1: Vocabulaire (ISO 22553-
1:2019)Ta slovenski standard je istoveten z: prEN ISO 22553-1
ICS:
87.040 Barve in laki Paints and varnishes
oSIST prEN ISO 22553-1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------oSIST prEN ISO 22553-1:2020
---------------------- Page: 2 ----------------------
oSIST prEN ISO 22553-1:2020
INTERNATIONAL ISO
STANDARD 22553-1
First edition
2019-10
Paints and varnishes —
Electro-deposition coatings —
Part 1:
Vocabulary
Peintures et vernis — Peintures d'électrodéposition —
Partie 1: Vocabulaire
Reference number
ISO 22553-1:2019(E)
ISO 2019
---------------------- Page: 3 ----------------------
oSIST prEN ISO 22553-1:2020
ISO 22553-1:2019(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 22553-1:2020
ISO 22553-1:2019(E)
Contents Page
Foreword ........................................................................................................................................................................................................................................iv
Introduction ..................................................................................................................................................................................................................................v
1 Scope ................................................................................................................................................................................................................................. 1
2 Normative references ...................................................................................................................................................................................... 1
3 Terms and definitions ..................................................................................................................................................................................... 1
4 Abbreviated terms .............................................................................................................................................................................................. 5
Annex A (informative) Test methods for e-coats ...................................................................................................................................... 6
Bibliography ................................................................................................................................................................................................................................ 7
© ISO 2019 – All rights reserved iii---------------------- Page: 5 ----------------------
oSIST prEN ISO 22553-1:2020
ISO 22553-1:2019(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www .iso
.org/iso/foreword .html.This document was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee
SC 9, General test methods for paints and varnishes.A list of all parts in the ISO 22553 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/members .html.iv © ISO 2019 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 22553-1:2020
ISO 22553-1:2019(E)
Introduction
During the electro-deposition coating process, the non-volatile matter content from water-thinnable
electro-deposition coating materials is deposited on the workpiece caused by an electrophoretic
process. During that process, the areas on the inside as well as on the outside of the workpiece,
including all cavities, are reached. Depending on whether the workpiece is used as cathode or anode,
it is distinguished between cathodic or anodic deposition. The cathodic electro-deposition coating
process is commonly used (see Figure 1).Key
1 demineralized water 9 solvent
2 wastewater treatment 10 demineralized water
3 anolyte circulation 11 acid
4 anode 12 electro-deposition coating material
5 cathode 13 ion-selective membrane
6 anode box 14 vehicle body
7 binder 15 cathodic e-coat tank
8 pigment
Figure 1 — Example of a deposition processes during cathodic electro-deposition coating
With the combination of binder, pigment and deposition process, a very resistant coating is generated
on the workpiece after hardening, which significantly contributes to the corrosion protection in interior
and exterior areas.The electric properties of the material are also significant for the electric power consumption of the
process (density of volume charge).Since the e-coat is jointly responsible for the total appearance of the coating system, a good run of the
coating without visible defects is generally emphasized.Consequently, for extensive corrosion protection and for sealing the workpiece, an additional
application of seam-sealing materials, adhesives or foams is recommended.© ISO 2019 – All rights reserved v
---------------------- Page: 7 ----------------------
oSIST prEN ISO 22553-1:2020
ISO 22553-1:2019(E)
Inside the e-coat tanks, there is a possibility of bacterial contamination due to the dragged-in material
and the physical conditions (heat, aqueous media, sources of carbon, etc.).This document specifies terms and definitions for electro-deposition coatings. The subsequent parts of
the ISO 22553 series specify methods for the characterization of electro-deposition coatings and test
methods. An overview on the test methods is given in Annex A.vi © ISO 2019 – All rights
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.