73.060.20 - Manganese ores

The method is applicable to products having an arsenic content of 0,001 to 0.2 % (m/m). Should be read in conjunction with ISO 4297. Specifies principle, reactions, reagents, apparatus, sample, procedure and expression of results. A figure illustrates the apparatus for the distillation of arsenic.

The method is applicable to products having phosphorus contents from 0,02 to 0,5 % (m/m). ISO 4293 should be read in conjunction with ISO 4297. Specifies principle, reagents, apparatus, sample, procedure and expression of results.

Specifies general instructions concerning reagents, apparatus, sample, procedure, calibration graphs and test report.

The method is applicable to products having calcium contents from 0,01 to 15 % (m/m) and magnesium contents from 0,01 to 4 % (m/m). ISO 7953 should be read in conjunction with ISO 4297. Specifies principle, reagents, apparatus, sampling and samples, procedure and expression of results.

The method is applicable to products having sodium contents from 0,02 to 1,0 % (m/m), and potassium contents from 0,08 to 3,0 % (m/m). ISO 7969 should be read in conjunction with ISO 4297. Specifies principle, reagents, apparatus, sampling, procedure and expression of results.

The method is applicable to products having an iron content between 0,2 % (m/m) and 10 % (m/m). ISO 9681 should be read in conjunction with ISO 4297. Specifies principle, reagents, apparatus, sampling and samples, procedure, and expression of results.

Method I is applicable to manganese ores having chromium contents less than 0.1 % (m/m), method II is applicable to manganese ores having chromium contents greater than 0.1 % (m/m). This second edition cancels and replaces the first edition (i.e. ISO 619-1975). Should be read in conjunction with ISO 4297.

The method is applicable to a concentration range of 0,1 to 4,0 % (m/m) of aluminium, 0,005 to 1,0 % (m/m) of copper, 0,005 to 1,0 % (m/m) of lead and 0,005 to 0,25 (m/m) of zinc. ISO 5889 should be read in conjunction with ISO 4297. Specifies principle, reagents, apparatus, sampling, procedure and expression of results.

Describes three methods: methods I and II are gravimetric methods which are applicable to maganese ores having sulphur contents greater than 0.01 % (m/m), and method III is a titrimetric method. Should be read in conjunction with ISO 4297. Specifies principle, reagents, apparatus, sample, procedure and expression of results. A figure illustrates the apparatus for determination of sulphur content in accordance with method III.

This third edition cancels and replaces the second edition (ISO 312-1980), of which it constitutes a minor revision. Specifies principle, reagents, apparatus, sample, procedure and expression of results. A figure gives an example of apparatus.

Method A is applicable to products having a total iron content from 1 to 25 % (m/m), and method B is applicable to products having a total iron content from 0.2 to 2 % (m/m). ISO 7990 should be read in conjunction with ISO 4297. Specifies principle, reactions (method A only), reagents, apparatus, sampling and samples, procedure and expression of results.

The photometric method (A) is applicable to products having aluminium contents from 0,1 to 1,5 % (m/m), the oxine gravimetric method (B) is applicable to products having aluminium contents over 1,5 % (m/m). Cancels and replaces the first edition (ISO 4295:1978), of which it constitutes a technical revision. Should be read in conjunction with ISO 4297.

The method is applicable to products having calcium and magnesium contents greater than 0,3 % (m/m). Should be read in conjunction with ISO 4297. Specifies principle, reagents, apparatus, sample, procedure and expression of results.

The method is applicable to a concentration range of 0,08 to 3 % (m/m) of potassium and 0,02 to 1 % (m/m) of sodium. ISO 4571 should be read in conjunction with ISO 4297. Specifies principle, reagents, apparatus, procedure and expression of results.

Two methods are specified. Method A is applicable to products having a nickel content of 0.01 to 1.0 % (m/m), method B is applicable to products having a nickel content of 0.005 to 1.0 % (m/m). Both methods specify principle, reactions (method A only), reagents, apparatus, sample, procedure and expression of results.

The method is applicable to products having a silicon content greater than 0,5 % (m/m) and a fluorine content not more than 0,1 % (m/m). Should be read in conjunction with ISO 4297. Specifies principle, reagents, apparatus, procedure and expression of results.

The method is applicable to the determination of a manganese content equal to or greater than 15 % (m/m). ISO 4298 should be read in conjunction with ISO 4297. Specifies principle, reactions, reagents, apparatus, sampling, procedure and expression of results.

The method is intended to be applied at the places of dispatch and/or acceptance of the ore. Annex A specifies a method to be used in the case of adhesive or wet manganese ores. Annex B specifies methods of correction for sprinkled water and/or rain-water. Cancels and replaces the first edition (ISO 4299:1980) of which it constitutes a minor revision.

The checking applies to manganese and chromium ores, whether natural or processed, being carried out in accordance with the methods specified in the relevant International Standards. Includes general conditions for division of experimental samples and experimental methods of division a) in three or more stages or b) in one or two stages.