prEN ISO 5830
(Main)This International Standard specifies the dimensions and
tolerances for male electrode caps for resistance spot welding
when a female taper (see IS0 1089) is used to fix the electrode
adaptor (see IS0 5829).
It only applies to electrode caps for which the electrode force
Fmsx, given for the diameter dl, does not exceed 4,O kN.
Widerstandspunktschweißen - Elektrodeneinsteckkappen (ISO 5830:1984)
Soudage par points par résistance - Embouts amovibles mâles d'électrode (ISO 5830:1984)
Uporovno točkovno varjenje - Elektrodne kape z zunanjim konusom (ISO 5830:1984)
General Information
Standards Content (sample)
SLOVENSKI STANDARD
oSIST prEN ISO 5830:2020
01-oktober-2020
Uporovno točkovno varjenje - Kape elektrod (ISO 5830:1984)
Resistance spot welding - Male electrode caps (ISO 5830:1984)
Widerstandspunktschweißen - Elektrodeneinsteckkappen (ISO 5830:1984)
Soudage par points par résistance - Embouts amovibles mâles d'électrode (ISO
5830:1984)
Ta slovenski standard je istoveten z: prEN ISO 5830
ICS:
25.160.30 Varilna oprema Welding equipment
oSIST prEN ISO 5830:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------oSIST prEN ISO 5830:2020
---------------------- Page: 2 ----------------------
oSIST prEN ISO 5830:2020
International Standard 0 5830
INTERNATIONAL ORGANIZATION FOR STANDAROIZATION*MEX&lYHAPO/lHAR OPrAHH3AUMR no CTAH&lAPTW3ALLMH*ORGANlSATlON INTERNATIONALE DE NORMALISATION
Resistance spot welding - Male electrode capsSoudage par points par résistance - Embouts amovibles mâles d'électrode
First edition - 1984-10-15
UDC 621.791.037.2 : 621.791.763 Ref. No. IS0 5830-1984 (E)
Descriptors : welding, resistance welding, spot welding, resistance welding electrodes, electrode holders, dimensions, designation, marking.
Price based on 2 pages---------------------- Page: 3 ----------------------
oSIST prEN ISO 5830:2020
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards bodies (IS0 member bodies). The work of preparing International
IS0 technical committees. Each memberStandards is normally carried out through
body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, govern-
ISO, also take part in the work.mental and non-governmental, in liaison with
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the IS0 Council. They are approved in accordance with IS0 procedures requiring at
least 75 % approval by the member bodies voting.International Standard
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.