EN ISO 9539:2010

Gas welding equipment - Materials for equipment used in gas welding, cutting and allied processes (ISO 9539:2010)

ISO 9539:2010 specifies the general, and some of the special, requirements on materials used for the construction of equipment used in gas welding, cutting and allied processes.

Gasschweißgeräte - Werkstoffe für Geräte für Einrichtungen zum Gasschweißen, Schneiden und verwandte Prozesse (ISO 9539:2010)

Diese Internationale Norm legt die allgemeinen und besonderen Anforderungen an die Werkstoffe fest, die für die Herstellung von Geräten für Gasschweißen, Schneiden und verwandte Prozesse notwendig sind.
Zusätzliche Anforderungen an Werkstoffe für Geräte können in anderen Normen festgelegt sein. Diese Internationale Norm gilt nicht für Werkstoffe für Schläuche zum Schweißen nach ISO 3821.

Matériel de soudage aux gaz - Matériaux utilisés pour le matériel de soudage aux gaz, coupage et techniques connexes (ISO 9539:2010)

L'ISO 9539:2010 fixe les exigences générales et certaines exigences particulières relatives aux matériaux utilisés dans la construction des matériels de soudage aux gaz, coupage et techniques connexes.

Oprema za plamensko varjenje - Materiali za naprave za plamensko varjenje, rezanje in sorodne postopke (ISO 9539:2010)

Ta mednarodni standard določa splošne in nekatere posebne zahteve za materiale, ki se uporabljajo za izdelavo naprav za plamensko varjenje, rezanje in sorodne postopke. Dodatne zahteve za materiale za nekatero opremo so podane v drugih standardih. Ta mednarodni standard ne velja za materiale, ki se uporabljajo za izdelavo varilnih cevk in jih določa ISO 3821.

General Information

• Status: Published
• Publication Date: 14-Jan-2010
• Withdrawal Date: 30-Jul-2010
• ICS: 25.160.20 - Welding consumables
• ICS: 25.160.30 - Welding equipment
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/SC 7 - Equipment for gas welding, cutting and allied processes
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 15-Jan-2010
• Due Date: 18-Jun-2010
• Completion Date: 15-Jan-2010
• Ref Project: SIST EN ISO 9539:2010 - Gas welding equipment - Materials for equipment used in gas welding, cutting and allied processes (ISO 9539:2010)

Relations

• Replaces: EN 29539:1992 - Materials for equipment used in gas welding, cutting and allied processes (ISO 9539:1988)
• Effective Date: 23-Jan-2010
• Amended By: EN ISO 9539:2010/A1:2013 - Gas welding equipment - Materials for equipment used in gas welding, cutting and allied processes (ISO 9539:2010/AMD 1:2013)
• Effective Date: 01-Feb-2012

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 9539:2010
01-april-2010
1DGRPHãþD
SIST EN 29539:1998
Oprema za plamensko varjenje - Materiali za naprave za plamensko varjenje,
rezanje in sorodne postopke (ISO 9539:2010)
Gas welding equipment - Materials for equipment used in gas welding, cutting and allied
processes (ISO 9539:2010)
Gasschweißgeräte - Werkstoffe für Geräte für Einrichtungen zum Gasschweißen,
Schneiden und verwandte Prozesse (ISO 9539:2010)
Matériel de soudage aux gaz - Matériaux utilisés pour le matériel de soudage aux gaz,
coupage et techniques connexes (ISO 9539:2010)
Ta slovenski standard je istoveten z: EN ISO 9539:2010
ICS:
25.160.30 Varilna oprema Welding equipment
SIST EN ISO 9539:2010 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 9539:2010

---------------------- Page: 2 ----------------------

SIST EN ISO 9539:2010


EUROPEAN STANDARD
EN ISO 9539

NORME EUROPÉENNE

EUROPÄISCHE NORM
January 2010
ICS 25.160.20 Supersedes EN 29539:1992
English Version
Gas welding equipment - Materials for equipment used in gas
welding, cutting and allied processes (ISO 9539:2010)
Matériel de soudage aux gaz - Matériaux utilisés pour le Gasschweißgeräte - Werkstoffe für Geräte für
matériel de soudage aux gaz, coupage et techniques Einrichtungen zum Gasschweißen, Schneiden und
connexes (ISO 9539:2010) verwandte Prozesse (ISO 9539:2010)
This European Standard was approved by CEN on 9 January 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9539:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 9539:2010
EN ISO 9539:2010 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 9539:2010
EN ISO 9539:2010 (E)
Foreword
This document (EN ISO 9539:2010) has been prepared by Technical Committee ISO/TC 44 "Welding and
allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding”, the secretariat of which is
held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by July 2010, and conflicting national standards shall be withdrawn at the
latest by July 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 29539:1992.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 9539:2010 has been approved by CEN as a EN ISO 9539:2010 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 9539:2010

---------------------- Page: 6 ----------------------

SIST EN ISO 9539:2010

INTERNATIONAL ISO
STANDARD 9539
Second edition
2010-01-15

Gas welding equipment — Materials for
equipment used in gas welding, cutting
and allied processes
Matériel de soudage aux ga
...