EN 13480-2:2017/FprA8

Metallic industrial piping - Part 2: Materials

This document specifies the requirements for steel products used for industrial piping and supports.
For some metallic materials other than steel, such as spheroidal graphite cast iron, aluminium, nickel, copper, titanium, requirements are or will be formulated in separate parts of this document.
For metallic materials which are not covered by a harmonized material standard and are not likely to be in near future, specific rules are given in this part or the above cited parts of this document.

Metallische industrielle Rohrleitungen - Teil 2: Werkstoffe

Tuyauteries industrielles métalliques - Partie 2: Matériaux

Kovinski industrijski cevovodi - 2. del: Materiali - Dopolnilo A8

General Information

• Status: Not Published
• ICS: 23.040.01 - Pipeline components and pipelines in general
• Technical Committee: CEN/TC 267 - Industrial piping and pipelines
• Drafting Committee: CEN/TC 267/WG 2 - Metallic materials
• Current Stage: 5060 - Closure of Vote - Formal Approval
• Due Date: 15-Jul-2021
• Completion Date: 15-Jul-2021
• Directive: 2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 13480-2:2018/kFprA8:2021 - Metallic industrial piping - Part 2: Materials

RELATIONS

• Amends: EN 13480-2:2017 - Metallic industrial piping - Part 2: Materials
• Effective Date: 28-Aug-2019

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 13480-2:2018/oprA8:2020
01-maj-2020
Kovinski industrijski cevovodi - 2. del: Materiali - Dopolnilo A8
Metallic industrial piping - Part 2: Materials
Metallische industrielle Rohrleitungen - Teil 2: Werkstoffe
Tuyauteries industrielles métalliques - Partie 2: Matériaux
Ta slovenski standard je istoveten z: EN 13480-2:2017/prA8
ICS:
23.040.10 Železne in jeklene cevi Iron and steel pipes
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
SIST EN 13480-2:2018/oprA8:2020 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 13480-2:2018/oprA8:2020
---------------------- Page: 2 ----------------------
SIST EN 13480-2:2018/oprA8:2020
DRAFT
EUROPEAN STANDARD
EN 13480-2:2017
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA8
May 2020
ICS 23.040.01
English Version
Metallic industrial piping - Part 2: Materials

Tuyauteries industrielles métalliques - Partie 2: Metallische industrielle Rohrleitungen - Teil 2:

Matériaux Werkstoffe

This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 267.

This draft amendment A8, if approved, will modify the European Standard EN 13480-2:2017. If this draft becomes an

amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for

inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13480-2:2017/prA8:2020 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 13480-2:2018/oprA8:2020
EN 13480-2:2017/prA8:2020 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

1 Modification to 3.1.2, temperature adjustment term T ................................................................... 4

2 Modification to 3.1.3, design reference temperature T ................................................................... 4

3 Modification to 3.2, Symbols and units ................................................................................................... 4

4 Modification to Clause 4, Requirements for materials to be used for pressure

containing parts in industrial piping ....................................................................................................... 5

5 Modification to Annex A, Grouping system for steels for pressure equipment ........................ 6

6 Modification to Annex B.1, General .......................................................................................................... 8

7 Modification to Annex B.2.2.1, General ................................................................................................... 8

8 Modification to Annex B.2.2.6, Temperature adjustment ................................................................ 8

---------------------- Page: 4 ----------------------
SIST EN 13480-2:2018/oprA8:2020
EN 13480-2:2017/prA8:2020 (E)
European foreword

This document (EN 13480-2:2017/prA8:2020) has been prepared by Technical Committee CEN/TC 267

“Industrial piping and pipelines”, the secretariat of which is held by AFNOR.
This document is currently submitted to the CEN Enquiry.

This document has been prepared under a standardization request given to CEN by the European

Commission and the European Free Trade Association, and supports essential requirements of

EU Directive(s).

For relationship with EU Directive, see informative Annex ZA, which is an integral part of

EN 13480-2:2017.

This document includes the text of the amendment itself. The amended/corrected pages of

EN 13480-2:2017 will be published as Issue 4 of the European Standard.

Amendments EN 13480-2:2017/prA4 to EN 13480-2:2017/prA6 are withdrawn from the work

program of Technical Committee CEN/TC 267 “Industrial piping and pipelines” following CEN Rules

related to the time limit for activating Preliminary Work Items.
---------------------- Page: 5 ----------------------
SIST EN 13480-2:2018/oprA8:2020
EN 13480-2:2017/prA8:2020 (E)
1 Modification to 3.1.2, temperature adjustment term T
Replace “T ” by “T ”. Definition 3.1.2 shall read as follows:
S A
“ 3.1.2
temperature adjustment term T

temperature relevant to the calculation of the design reference temperature T and dependent on the

calculated tensile membrane stress at the appropriate minimum metal temperature

Note 1 to entry Values for temperature adjustment term TA are given in Table B.2–12.

Note 2 to entry For tensile membrane stress reference is made to EN 13480-3:2017, Clause 12.”.

2 Modification to 3.1.3, design reference temperature T
Replace “T ” by “T ”. Definition 3.1.3 shall read as follows:
S A
“3.1.3
design reference temperature T

temperature used for determining the impact energy requirements and determined by adding the

temperature adjustment T to the minimum metal temperature T
A M
T =T +T
R M A
3 Modification to 3.2, Symbols and units

Replace “T ” by “T ”. In Table 3.2-1, the line related to the “temperature adjustment term” shall read as

S A
follows:
T temperature adjustment term °C
...