94/27/EC - Restrictions on the marketing and use of certain dangerous substances and preparations (Dir. 76/769/EEC 12th amendment)

This European Standard specifies a method for accelerated wear and corrosion, to be used prior to the detection of nickel release from coated items that come into direct and prolonged contact with the skin.

This European Standard specifies a method for accelerated wear and corrosion, to be used prior to the detection of nickel release from coated items that come into direct and prolonged contact with the skin.

This European Standard specifies a method for accelerated wear and corrosion, to be used prior to the detection of nickel release from coated items that come into direct and prolonged contact with the skin.

This European Standard specifies a method for the determination of nickel in aluminium, titanium, copper, silver, gold and their alloys and in steels by flame atomic absorption spectrophotometry. The method is primarily suitable when the nickel content of a sample lies between 0,03% and 0,07% (m/m).

This European Standard specifies a method for simulating the release of nickel from all post assemblies which are inserted into pierced ears and other pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin in order to determine whether such items are in compliance with the European Directive 76/769/EEC as amended by 94/27/EC and 2004/96/EC. DRAFTING REMARK Subject to the final positive decision of the European Commission, CEN/TC 347/TG 1 supports the following wording to be included in the scope of this standard: Spectacle frames and sunglasses are excluded from the scope of this European Standard.

CEN/TC - Modifications in list entries 5.8 and 5.9.

This European Standard specifies a method for simulating the release of nickel from all post assemblies which are inserted into pierced ears and other pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin in order to determine whether such articles are in compliance with the Commission Regulation (EC) No 552/2009 amending Regulation (EC) No 1907/2006 on REACH as regards Annex XVII.
Spectacle frames and sunglasses are excluded from the scope of this European Standard.
NOTE   Spectacle frames and sunglasses are subject to the requirements of EN 16128:2011 which provides an unchanged re-publication of the technical requirements that had previously been specified in EN 1811:1998, but restricted in scope to apply only to spectacle frames and sunglasses.

This European Standard specifies a method for simulating the release of nickel from articles intended to come into direct and prolonged contact with the skin in order to determine whether such items release nickel at a rate greater than 0,5 µg/cm2/week.

This European Standard specifies a method for simulating the release of nickel from articles intended to come into direct and prolonged contact with the skin in order to determine whether such items release nickel at a rate greater than 0,5 ug/cm2/week.

This European Standard specifies a method for simulating the release of nickel from articles intended to come
into direct and prolonged contact with the skin in order to determine whether such items release nickel at a
rate greater than 0,5 µg/cm2/week.

This European Standard specifies a method for accelerated wear and corrosion, to be used prior to the detection of nickel release from coated items that come into direct and prolonged contact with the skin.

This European Standard specifies a method for simulating the release of nickel from articles intended to come into direct and prolonged contact with the skin in order to determine whether such items release nickel at a rate greater than 0,5 ug/cm2/week.

This European Standard specifies a method for the determination of nickel in aluminium, titanium, copper, silver, gold and their alloys and in steels by flame atomic absorption spectrophotometry. The method is primarily suitable when the nickel content of a sample lies between 0,03% and 0,07% (m/m).

This European Standard specifies a method for accelerated wear and corrosion, to be used for the detection of nickel release from coated items that come into direct and prolonged contact with the skin.

This European Standard specifies a method for accelerated wear and corrosion, to be used for the detection of nickel release from coated items that come into direct and prolonged contact with the skin.