prEN ISO 407
(Main)Standard Details
Small medical gas cylinders - Pin-index yoke-type valve connections (ISO/DIS 407:2020)
Kleine Gasflaschen für die medizinische Anwendung - Ventilseitenstutzen mit Anschlussbügel nach dem PIN-Index-System (ISO/DIS 407:2020)
Petites bouteilles à gaz médicaux - Raccords de robinets du type étrier avec ergots de sécurité (ISO/DIS 407:2020)
Male plinske jeklenke za uporabo v medicini - Ventilski priključni nastavki po sistemu pin-index (ISO/DIS 407:2020)
General Information
RELATIONS
Standards Content (sample)
SLOVENSKI STANDARD
oSIST prEN ISO 407:2020
01-marec-2020
Male plinske jeklenke za uporabo v medicini - Ventilski priključni nastavki po
sistemu pin-index (ISO/DIS 407:2020)
Small medical gas cylinders - Pin-index yoke-type valve connections (ISO/DIS 407:2020)
Kleine Gasflaschen für die medizinische Anwendung - Ventilseitenstutzen mitAnschlussbügel nach dem PIN-Index-System (ISO/DIS 407:2020)
Petites bouteilles à gaz médicaux - Raccords de robinets du type étrier avec ergots de
sécurité (ISO/DIS 407:2020)Ta slovenski standard je istoveten z: prEN ISO 407
ICS:
11.040.10 Anestezijska, respiratorna in Anaesthetic, respiratory and
reanimacijska oprema reanimation equipment
23.020.35 Plinske jeklenke Gas cylinders
23.060.40 Tlačni regulatorji Pressure regulators
oSIST prEN ISO 407:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------oSIST prEN ISO 407:2020
---------------------- Page: 2 ----------------------
oSIST prEN ISO 407:2020
DRAFT INTERNATIONAL STANDARD
ISO/DIS 407
ISO/TC 58/SC 2 Secretariat: AFNOR
Voting begins on: Voting terminates on:
2020-02-06 2020-04-30
Small medical gas cylinders — Pin-index yoke-type valve
connections
Petites bouteilles à gaz médicaux — Raccords de robinets du type à étrier avec ergots de sécurité
ICS: 11.040.10THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 407:2020(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. ISO 2020
---------------------- Page: 3 ----------------------
oSIST prEN ISO 407:2020
ISO/DIS 407:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 407:2020
ISO/DIS 407:2020(E)
Contents Page
Foreword ........................................................................................................................................................................................................................................iv
1 Scope ................................................................................................................................................................................................................................. 1
2 Normative references ...................................................................................................................................................................................... 1
3 Terms and definitions ..................................................................................................................................................................................... 1
4 Valve ................................................................................................................................................................................................................................... 1
5 Yoke .................................................................................................................................................................................................................................... 2
6 Basic dimensions.................................................................................................................................................................................................. 2
6.1 General ........................................................................................................................................................................................................... 2
6.2 Pin-index yoke-type valve body................................................................................................................................................ 3
6.3 Single-pin yoke-type valve connection system............................................................................................................ 4
6.4 Two-pin yoke-type valve connection system with the pins in a single row ....................................... 4
6.5 Two-pin yoke-type valve connection system with the pins in a double row .................................... 5
6.6 Basic dimensions ................................................................................................................................................................................... 5
7 Requirements for alternative designs of yoke-type valve connections .......................................................6
7.1 Requirements for the design of the connecting yoke ............................................................................................ 6
7.2 Examples of alternative construction for the connecting yoke ..................................................................... 6
8 Dimensions and positions of the holes and pins for yoke-type valve connections .........................9
8.1 General ........................................................................................................................................................................................................... 9
8.2 Outlet connection with single-pin system ....................................................................................................................... 9
8.3 Outlet connections with two-pin/single-row system .........................................................................................10
8.3.1 Outlet connection for oxygen .............................................................................................................................10
8.3.2 Outlet connection for oxygen/carbon dioxide mixture (CO ≤ 7 %) ...............................11
8.3.3 Outlet connection for oxygen/helium mixture (He ≤ 80 %) ...................................................12
8.3.4 Outlet connection for ethylene .........................................................................................................................13
8.3.5 Outlet connection for nitrous oxide .............................................................................................................14
8.3.6 Outlet connection for cyclopropane .............................................................................................................15
8.3.7 Outlet connection for helium/oxygen mixture (O < 20 %) .................. ..................................16
8.3.8 Outlet connection for carbon dioxide and carbon dioxide/oxygen mixture(CO > 7 %) ........................................................................................................................................................................17
8.3.9 Outlet connection for medical air ...................................................................................................................18
8.3.10 Outlet connection for nitrogen .........................................................................................................................19
8.4 Outlet connection with two-pin/double-row system .........................................................................................20
© ISO 2020 – All rights reserved iii---------------------- Page: 5 ----------------------
oSIST prEN ISO 407:2020
ISO/DIS 407:2020(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/ iso/ foreword .html.This document was prepared by Technical Committee ISO/TC 58, Gas cylinders, Subcommittee SC 2,
Cylinders fittings.This fourth edition cancels and replaces the third edition (ISO 407:2004), which has been technically
revised.The main changes compared to the previous edition are as follows:
— addition of a note in Figure 1 on the introduction of a radius to avoid stress concentration;
— addition of dimension "m" in Figure 1;— the basic dimensions for pin index yoke type value connections have been revised (see Table 2);
— addition of a requirement for the design of the connecting yoke.Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.iv © ISO 2020 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 407:2020
DRAFT INTERNATIONAL STANDARD ISO/DIS 407:2020(E)
Small medical gas cylinders — Pin-index yoke-type valve
connections
1 Scope
This document concerns pin-index yoke-type valve connections for medical gas cylinders, with a
working pressure up to a maximum of 200 bar and/or test pressure up to a maximum of 300 bar.
NOTE This type of connection is primarily used for small cylinders (5 l or below).
It specifies:— basic dimensions;
— requirements for alternative designs of the yoke-type valve connections;
— dimensions and positions for the holes and pins for the outlet connections.
It also specifies the dimensions and positions for the holes and pins for the outlet connections for the
gases and gas mixtures given in Table 1.2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 32:1977, Gas cylinders for medical use — Marking for identification of content
3 Terms and definitionsNo terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at http:// www .iso .org/ obp— IEC Electropedia: available at http:// www .electropedia .org/
4 Valve
Each small medical gas cylinder can be fitted with a yoke valve (see Clause 6). The yoke valve shall have
location holes of the dimensions and in the positions indicated in Clause 8 for the appropriate gas or gas
mixture.The name or chemical symbol of the gas or gas mixture shall be clearly and indelibly stamped on the valve.
© ISO 2020 – All rights reserved 1---------------------- Page: 7 ----
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.