35.100.10 - Physical layer

This European Standard defines the mandatory and optional requirements for the medium specific physical and data link layer for HBES Class 1 Twisted Pair TP1. Data link layer interface and general definitions, which are media independent, are given in EN 50090 4 2.

The present document provides the ETSI endorsement of ANSI/SCTE Standard 220-1 [1].
ANSI/SCTE Standard 220-1 is part of a series of specifications that defines the fourth generation of high-speed dataover-
cable systems, commonly referred to as the DOCSIS 3.1 specifications. The standard was developed for the
benefit of the cable industry, and includes contributions by operators and vendors from North and South America,
Europe and Asia.
This generation of the DOCSIS specifications builds up...view more

The present document is one of the parts of the specification of the Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI). The present document specifies the physical channel arrangements. DECT physical channels are radio communication paths between two radio end points. A radio end point is either part of the fixed infrastructure, a privately owned Fixed Part (FP), typically a base station, or a Portable Part (PP), typically a handset. The assignment of one or more particul...view more

This European Standard specifies the requirements of parameters for the physical and the link layer for systems using radio to read remote meters. The primary focus is to use the Short Range Device (SRD) unlicensed telemetry bands. The standard encompasses systems for walk-by, drive-by and fixed installations. As a broad definition, this European Standard can be applied to various application layers.

This European Standard specifies the requirements of parameters for the physical and the link layer for systems using radio to read remote meters. The primary focus is to use the Short Range Device (SRD) unlicensed telemetry bands. The standard encompasses systems for walk-by, drive-by and fixed installations. As a broad definition, this European Standard can be applied to various application layers.

This draft European standard is applicable to the physical and link layer parameters of baseband communication over twisted pair (M Bus) for meter communication systems. It is especially applicable to thermal energy meters, heat cost allocators, water meters and gas meters.
NOTE    It is usable also for other meters (like electricity meters) and for sensors and actuators. For generic descriptions concerning communication systems for meters and remote reading of meters see EN 13757-1.

This draft European Standard specifies Transport and Security Services for communication systems for meters and remote reading of meters.
This draft European Standard specifies secure communication capabilities by design and supports the building of a secure system architecture.
This draft European standard is applicable to the protection of consumer data to ensure privacy.
This draft European Standard is intended to be used with the lower layer specifications determined in EN 13757-2, EN 137...view more

This draft European standard is applicable to the physical and link layer parameters of baseband communication over twisted pair (M Bus) for meter communication systems. It is especially applicable to thermal energy meters, heat cost allocators, water meters and gas meters.
NOTE    It is usable also for other meters (like electricity meters) and for sensors and actuators. For generic descriptions concerning communication systems for meters and remote reading of meters see EN 13757-1.

This draft European Standard specifies Transport and Security Services for communication systems for meters and remote reading of meters.
This draft European Standard specifies secure communication capabilities by design and supports the building of a secure system architecture.
This draft European standard is applicable to the protection of consumer data to ensure privacy.
This draft European Standard is intended to be used with the lower layer specifications determined in EN 13757-2, EN 137...view more

This International Standard aims at establishing a unified standard concerning the lower
communication layer common to multimedia applications, and does not deal with the upper
communication layer which depends upon individual applications.
This document specifies a unidirectional visible light communication protocol using visible
light, named "visible light beacon system for multimedia applications". This document does
not specify the type of receivers. Dimming can be done by such methods ...view more

The present document is one of the parts of the specification of the Digital Enhanced Cordless Telecommunications
(DECT) Common Interface (CI).
The present document specifies the physical channel arrangements. DECT physical channels are radio communication
paths between two radio end points. A radio end point is either part of the fixed infrastructure, a privately owned Fixed
Part (FP), typically a base station, or a Portable Part (PP), typically a handset. The assignment of one or more part...view more

ISO/IEC TR 22512:2017 provides guidance for the implementation of ISO/IEC 17982.

IEC 62943:2017 aims at establishing a unified standard concerning the lower communication layer common to multimedia applications, and does not deal with the upper communication layer which depends upon individual applications. This document specifies a unidirectional visible light communication protocol using visible light, named "visible light beacon system for multimedia applications".

IEC 62943:2017 aims at establishing a unified standard concerning the lower communication layer common to multimedia applications, and does not deal with the upper communication layer which depends upon individual applications. This document specifies a unidirectional visible light communication protocol using visible light, named "visible light beacon system for multimedia applications".

This European Standard gives the standardization framework of communication systems applicable to the exchange of data from metering devices to other devices within a mesh network.
This European Standard specifies how to interpret prEN 16836-2:2015 and prEN 16836-3:2015 which give a list of references to the ZigBee documents. This series is applicable to communications systems that involve messages and networking between a meter or multiple meters and other devices in a mesh network, such as in...view more

This European Standard specifies the medium access control/physical layer MAC/PHY and networking layer of a communication protocol for the exchange of data from metering devices to other devices within a mesh network.
The referenced documents in this European Standard contain specifications, interface descriptions, object descriptions, protocols and algorithms pertaining to this protocol standard, the device objects, device profile, the application framework, the network layer, and security ser...view more

This part of this International Standard specifies the physical and data link layer for a high level communication, directly between battery electric vehicles (BEV) or plug-in hybrid electric vehicles (PHEV), and the fixed electrical charging installation (Electric Vehicle Supply Equipment (EVSE)), used in addition to the Basic Signaling, as described in IEC 61851. It covers the overall information exchange between all actors involved in the electrical energy exchange. This International Standar...view more

This European Standard specifies the physical layer parameters of a local meter readout system (“Local Bus”) for the communication with and the readout of a single meter or a small cluster of meters via a single battery powered readout device (“master”) which can be connected temporarily or stationary for the communication directly to a meter (i.e. local readout) or via a fixed wiring or a small bus (i.e. remote readout).
For generic descriptions concerning communication systems for meters and ...view more

This European Standard specifies the physical layer parameters of a local meter readout system (Local Bus) for the communication with and the readout of a single meter or a small cluster of meters via a single battery powered readout device (master) which can be connected temporarily or stationary for the communication directly to a meter (i.e. local readout) or via a fixed wiring or a small bus (i.e. remote readout).
For generic descriptions concerning communication systems for meters and remo...view more

This European Standard specifies the protocols to use when performing relaying in wireless meter readout networks. This European Standard is an extension to wireless meter readout specified in EN 13757-4. It supports the routing of modes P and Q, and simple single-hop repeating of modes S, T, C, F and N.
The main use of this standard is to support simple retransmission as well as routed wireless networks for the readout of meters.
NOTE   Electricity meters are not covered by this standard, as ...view more