FprEN ISO 11807-2

Integrated optics - Vocabulary - Part 2: Terms used in classification (ISO/FDIS 11807-2:2021)

Integrierte Optik - Begriffe - Teil 2: Begriffe für die Klassifizierung (ISO/FDIS 11807-2:2021)

Dieses Dokument legt Begriffe zur Klassifizierung von integriert-optischen Elementen, integriert-optischen Komponenten und integriert-optischen Baugruppen fest, wie sie beispielsweise in den Bereichen optische Nachrichtentechnik und Sensorik eingesetzt werden.

Optique intégrée - Vocabulaire - Partie 2: Termes utilisés pour la classification (ISO/FDIS 11807-2:2021)

Integrirana optika - Slovar - 2. del: Strokovni izrazi v klasifikaciji (ISO/FDIS 11807-2:2021)

General Information

• Status: Not Published
• ICS: 01.040.31 - Electronics (Vocabularies)
• ICS: 31.260 - Optoelectronics. Laser equipment
• Technical Committee: CEN/TC 123 - Lasers and photonics
• Current Stage: 5060 - Closure of Vote - Formal Approval
• Due Date: 08-Sep-2021
• Completion Date: 08-Sep-2021
• Ref Project: kSIST FprEN ISO 11807-2:2021 - Integrated optics - Vocabulary - Part 2: Terms used in classification (ISO/FDIS 11807-2:2021)

RELATIONS

• Revised: EN ISO 11807-2:2005 - Integrated optics - Vocabulary - Part 2: Terms used in classification (ISO 11807-2:2001)
• Effective Date: 28-Dec-2016

Standards Content (sample)

SLOVENSKI STANDARD
oSIST prEN ISO 11807-2:2020
01-maj-2020

Integrirana optika - Slovar - 2. del: Strokovni izrazi v klasifikaciji (ISO/DIS 11807-

2:2020)

Integrated optics - Vocabulary - Part 2: Terms used in classification (ISO/DIS 11807-

2:2020)

Integrierte Optik - Begriffe - Teil 2: Begriffe für die Klassifizierung (ISO/DIS 11807-

2:2020)

Optique intégrée - Vocabulaire - Partie 2: Termes utilisés pour la classification (ISO/DIS

11807-2:2020)
Ta slovenski standard je istoveten z: prEN ISO 11807-2
ICS:
01.040.31 Elektronika (Slovarji) Electronics (Vocabularies)
31.260 Optoelektronika, laserska Optoelectronics. Laser
oprema equipment
oSIST prEN ISO 11807-2:2020 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 11807-2:2020
---------------------- Page: 2 ----------------------
oSIST prEN ISO 11807-2:2020
DRAFT INTERNATIONAL STANDARD
ISO/DIS 11807-2
ISO/TC 172/SC 9 Secretariat: DIN
Voting begins on: Voting terminates on:
2020-03-30 2020-06-22
Integrated optics — Vocabulary —
Part 2:
Terms used in classification
Optique intégrée — Vocabulaire —
Partie 2: Termes utilisés pour la classification
ICS: 01.040.31; 31.260
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 11807-2:2020(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. ISO 2020
---------------------- Page: 3 ----------------------
oSIST prEN ISO 11807-2:2020
ISO/DIS 11807-2:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 11807-2:2020
ISO/DIS 11807-2:2020(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

Introduction ..................................................................................................................................................................................................................................v

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms and definitions ..................................................................................................................................................................................... 1

3.1 Types of component configuration ........................................................................................................................................ 1

3.2 Types of function ................................................................................................................................................................................... 2

3.3 Passive elements, components, and modules .............................................................................................................. 3

3.4 Dynamic elements, components, and modules ........................................................................................................... 7

3.5 Active elements, components, and modules ................................................................................................................. 7

Bibliography ................................................................................................................................................................................................................................ 9

© ISO 2020 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST prEN ISO 11807-2:2020
ISO/DIS 11807-2:2020(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/ patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following

URL: www .iso .org/ iso/ foreword .html.

This document was prepared by Technical Committee ISO/TC 172 Optics and photonics, Subcommittee

SC 9, Laser and electro optical systems

This second edition cancels and replaces the first edition (ISO 11807-2:2001), which has been technically

revised.
The main changes compared to the previous edition are as follows:

— Terminologies that have not been frequently used over the last 5 to 10 years are revised to those

matching to current trends.

— In particular, in 3.1 types of component configuration, configuration is revised by adding a new

configuration, component, while “chip” is replaced for “component” and”module.”

— In 3.2 “controllable” is replaced by “dynamic,” which is placed between passive and active.

— In the revision process, terminologies and definitions are compared to similar terminology definition

in IEC and harmonized.
A list of all parts in the ISO 11807 series can be found on the ISO website.
Annex A of this document is for information only.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www .iso .org/ members .html .
iv © ISO 2020 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 11807-2:2020
ISO/DIS 11807-2:2020(E)
Introduction

Integrated optical devices are classified using three major fields based on user-oriented criteria. In the

following text, the attribute “integrated optical” will usually be omitted.

The first criterion for classification is that the devices may be single-mode or multi-mode components.

Secondly, integrated optical devices are classified according to complexity of the configuration (see

Clause 3 and Figure 1: elements, components, and devices).

The third criterion for classification is the function of the component. In 3.2, components are classified

according to a general definition of the function, (passive, controllable, active). In 3.3, more specific

subclassification is made according to functional criteria. The functional classification is defined for

integrated optical elements, but can also be used in a similar manner for components and devices. In

the latter cases, the classification refers to the element of highest functional complexity (i.e. passive,

controllable, active).
© ISO 2020 – All rights reserved v
---------------------- Page: 7 ----------------------
oSIST prEN ISO 11807-2:2020
---------------------- Page: 8 ----------------------
oSIST prEN ISO 11807-2:2020
DRAFT INTERNATIONAL STANDARD ISO/DIS 11807-2:2020(E)
Integrated optics — Vocabulary —
Part 2:
Terms used in classification
1 Scope

This document defines terms used in the classification of integrated optical elements, integrated optical

components and integrated optical devices, which find applications, for example, in the fields of optical

communications and sensors.
2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of document. For dated references, only the edition cited applies. For undated

references, the latest edition of the referenced document (including any amendments) applies.

ISO 11807-1, Integrated optics -Vocabulary - Part 1: Basic terms and symbols

ISO 14881, Integrated optics - Interfaces - Parameters relevant to coupling properties

3 Terms and definitions

For the purposes of this document, the terms and definitions given in ISO 11807-1 and ISO 14881 and

the following apply.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

— IEC Electropedia: available at http:// www .electropedia .org/
— ISO Online browsing platform: available at https:// www .iso .org/ obp
3.1 Types of component configuration
3.1.1
integrated optical element
optical element which performs a basic function of integrated optics
Note 1 to entry: See Figure 1.
3.1.2
integrated optical component
packaged unit which contains at least one integrated optical element
Note 1 to entry: See Figure 1.
3.1.2
integrated optical module

packaged integration of optical components and/or elements, accomplishing defined functionality

Note 2 to entry: See Figure 1.
© ISO 2020 – All rights reserved 1
---------------------- Page: 9 ----------------------
oSIST prEN ISO 11807-2:2020
ISO/DIS 11807-2:2020(E)
3.1.3
integrated optical device

generic optical unit, either an optical element, an optical component, an optical assembly, an optical

sub-assembly, or an optical module.
Note 1 to entry: See Figure 1.
a) integrated optical element b) integrated optical component
c) integrated optical module d) integrated optical device
Key
1 Interfaces

Figure 1 — Illustration of the classification into elements, components and devices

3.2 Types of function

Note 1 to entry The types of function defined here are specified for elements, whereby they are valid for all

correspon
...