prEN 6081

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.PHUHLuft- und Raumfahrt - Vollniet, Universalkopf, enge Toleranz - Zoll-ReiheSérie aérospatiale - Rivets de précision, tête universelle - Série en inchesAerospace series - Rivet, universal head, close tolerance - Inch series49.030.60KoviceRivetsICS:Ta slovenski standard je istoveten z:prEN 6081oSIST prEN 6081:2019en,fr,de01-januar-2019oSIST prEN 6081:2019SLOVENSKI

Aerospace series æ Rivetá universal headá close tolerance æ Inch series Série aérospatiale æ Rivets de précisioná tête universelle æ Série en inches

Luftæ und Raumfahrt æ Vollnietá Universalkopfá enge Toleranz æ ZollæReihe This draft European Standard is submitted to CEN members for enquiryä It has been drawn up by the Technical Committee ASDæSTANä

If this draft becomes a European Standardá CEN members are bounwhich stipulate the conditions for giving this European Standard the status of a national standard without any alterationä

This draft European Standard was established by CEN in three ofer language made by translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä

CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä

Recipients of this draft are invited to submitá with their commentsá notification of any relevant patent rights of which they are aware and to provide supporting documentationä

Warning ã This document is not a European Standardä It is distributed for review and commentsä It is subject to change without notice and shall not be referred to as a European Standardä

EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG

t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä prEN

prEN 6081:2018 (E) 2 Contents Page European foreword ....................................................................................................................................................... 3 Introduction .................................................................................................................................................................... 4 1 Scope .................................................................................................................................................................... 5 2 Normative references .................................................................................................................................... 5 3 Terms and definitions ................................................................................................................................... 5 4 Requirements ................................................................................................................................................... 6 4.1 Configuration, dimensions, tolerances and mass ................................................................................ 6 4.2 Material and surface treatment ................................................................................................................. 9 5 Designation..................................................................................................................................................... 11 6 Marking ............................................................................................................................................................ 11 6.1 Material identification ............................................................................................................................... 11 6.2 Manufacturer's identification .................................................................................................................. 12 6.3 Identification of oversize rivets .............................................................................................................. 12 7 Technical specification ............................................................................................................................... 12 7.1 Aluminium alloy rivet ................................................................................................................................. 12 7.2 Titanium alloy rivet ..................................................................................................................................... 13 8 Quality management system .................................................................................................................... 13 Annex A (informative)

Record of revision .......................................................................................................... 14 Bibliography ................................................................................................................................................................. 15

prEN 6081:2018 (E) 3 European foreword This document (prEN 6081:2018) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This document is currently submitted to the CEN Enquiry. This document will supersede EN 6081:2016. oSIST prEN 6081:2019

prEN 6081:2018 (E) 4 Introduction This document is published at Airbus agreed version prEN 6081 edition P3. Former issue 1 and 2 and drafts may exist of Airbus development only but without any ASD–STAN official publication. In consequence configuration management discrepancies with these unofficial documents are under Airbus responsibility. oSIST prEN 6081:2019

prEN 6081:2018 (E) 5 1 Scope This document specifies the dimensions, tolerances and mass of rivets with universal head, close tolerance, inch series, for aerospace application. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2114, Aerospace series - Aluminium 1050A-H14 - Wire for solid rivets - D

10 mm1 EN 2115, Aerospace series - Aluminium alloy 2117-T42 - Wire for solid rivets – D

10 mm EN 2116, Aerospace series - Aluminium alloy 2017A-T42 - Wire for solid rivets - D

10 mm EN 2117, Aerospace series - Aluminium alloy AL-P5056A (5056A)-H32 - Wire for solid rivets – D

10 mm EN 2424, Aerospace series - Marking of aerospace products EN 3115, Aerospace series - Aluminium alloy 7050-T73 - Wire for solid rivets – D

10 mm prEN 6104, Aerospace series - Rivets, solid, in aluminium or aluminium alloy - Inch series - Technical Specification1 prEN 6118, Aerospace series - Process specification - Aluminium base protection for fasteners1 ISO 8080, Aerospace - Anodic treatment of titanium and titanium alloys - Sulfuric acid process AMS 4982, Titanium alloy wire 44.5 Cb2 MIL-C-5541, Chemical conversion coatings on aluminium and aluminium alloys3 NASM 5674, Rivets, structural, aluminium alloy, titanium columbium alloy, general specification for4 3 Terms and definitions No terms and definitions are listed in this document. ISO and IEC maintain terminological databases for use in standardization at the following addresses: