EN 3238:2010

Aerospace series - Metallic materials - Test method - Shear test for wires and rivets

This standard specifies the requirements for shear testing rivet wire and rivets in metallic materials for aerospace applications.
It shall be applied when referred to in the EN technical specification or material standard unless otherwise specified on the drawing, order or inspection schedule.

Luft- und Raumfahrt - Metallische Werkstoffe - Prüfverfahren - Prüfung der Scherfestigkeit von Drähten und Nieten

Diese Norm legt die Anforderungen an die Prüfung der Scherfestigkeit von Nietdraht und Nieten bei
metallischen Werkstoffen zur Anwendung in der Luft- und Raumfahrt fest.
Sie ist anzuwenden, wenn auf sie in der Europäischen Technischen Spezifikation oder Werkstoffnorm
verwiesen wird, sofern auf der Konstruktionszeichnung, in der Bestellung oder in der Prüfanweisung nichts
anderes festgelegt ist.

Série aérospatiale - Matériaux métalliques - Méthodes d'essais - Essai de cisaillement pour fils et rivets

Aeronavtika - Kovinski materiali - Preskusne metode - Strižni preskus za žice in kovice

Ta standard določa zahteve za strižni preskus za žico za kovičenje in kovice v kovinskih materialih za uporabo v aeronavtiki.
Uporablja se, kadar se nanaša na tehnično specifikacijo EN ali standard za materiale, razen če je drugače določeno na risbi, naročilu ali urniku pregleda.

General Information

• Status: Published
• Publication Date: 05-Oct-2010
• Withdrawal Date: 29-Apr-2011
• ICS: 49.025.01 - Materials for aerospace construction in general
• ICS: 49.030.60 - Rivets
• ICS: 49.030.99 - Other fasteners
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4 - Metallic
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 06-Oct-2010
• Completion Date: 06-Oct-2010
• Ref Project: SIST EN 3238:2011 - Aerospace series - Metallic materials - Test method - Shear test for wires and rivets

Relations

• Revised: EN 3228:2022 - Aerospace series - Nuts, hexagonal, plain, reduced height, normal across flats, in steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C
• Effective Date: 26-Jun-2019

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aeronavtika - Kovinski materiali - Preskusne metode - Strižni preskus za žice in koviceLuft- und Raumfahrt - Metallische Werkstoffe - Prüfverfahren - Prüfung der Scherfestigkeit von Drähten und NietenSérie aérospatiale - Matériaux métalliques - Méthodes d'essais - Essai de cisaillement pour fils et rivetsAerospace series - Metallic materials - Test method - Shear test for wires and rivets49.025.05Železove zlitine na splošnoFerrous alloys in generalICS:Ta slovenski standard je istoveten z:EN 3238:2010SIST EN 3238:2011en,de01-november-2011SIST EN 3238:2011SLOVENSKI
STANDARD



SIST EN 3238:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3238
October 2010 ICS 49.030.99 English Version
Aerospace series - Metallic materials - Test method - Shear test for wires and rivets
Série aérospatiale - Matériaux métalliques - Méthodes d'essais - Essai de cisaillement pour fils et rivets
Luft- und Raumfahrt - Metallische Werkstoffe - Prüfverfahren - Prüfung der Scherfestigkeit von Drähten und Nieten This European Standard was approved by CEN on 5 May 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3238:2010: ESIST EN 3238:2011



EN 3238:2010 (E) 2 Contents Page Foreword .3Introduction .41 Scope .52 Normative references .5 Terms, .53 definitions, parameters and symbols .53.1 General terms .53.2 Other terms .53.2.1 Shear strength .53.2.2 Parameters and symbols .64 Health and safety .65 Principle .66 Testing requirements .66.1 Resources .66.1.1 Equipment/plant .66.1.2 Materials/reagents .
...