FprCEN/TS 17394-4
(Main)The method described in this document complements
— EN 17394 2:— , Textiles and textile products – Part 2: Safety of children's clothing – Security of attachment of buttons – Test method
— CEN/TS 17394 3:2020, Textiles and textile products – Part 3: Safety of children's clothing - Security of attachment of metal mechanically applied press fasteners - Test method
and is applicable to all other components including labels, badges, sequins, rhinestones, eyelets and non-metal press fasteners, which are too small to be gripped in test equipment jaws or their integrity is disrupted by gripping.
The performance requirements are provided in CEN/TS 17394 1:2020, Textiles and textile products – Part 1: Safety of children's clothing - Security of attachment of attached components to infants' clothing - Specification
The method is an extremely aggressive wash method has been developed to assess if the components remain attached.
It is specifically applicable to clothing, where the detachment of these components might result in accidents to children.
This document does not apply to:
a) child care articles;
b) shoes, boots and similar footwear;
c) toys (see NOTE 2);
d) other articles sold with clothing;
NOTE 1 The above items are covered by other CEN Technical Committees and as such are out of scope of this document.
NOTE 2 Toy disguise costumes including carnival costumes are examples of clothing which are also toys and fall within the scope of the Toy Safety Directive.
Textilien und textile Produkte - Teil 4: Sicherheit von Kinderbekleidung - Sicherheit der Befestigung von Komponenten außer Knöpfen und mechanisch befestigten Druckknöpfen - Prüfverfahren
Textiles et produits textiles - Partie 4 : Sécurité des vêtements d’enfants - Sécurité d’attache des composants à l’exception des boutons et des boutons-pression métalliques appliqués mécaniquement - Méthode d’essai
Tekstilije in tekstilni izdelki - 4. del: Varnost otroških oblačil - Varnost pritrditve pritrjenih delov, razen gumbov in kovinskih pritiskačev - Preskusna metoda
General Information
Standards Content (sample)
SLOVENSKI STANDARD
kSIST-TS FprCEN/TS 17394-4:2019
01-september-2019
Tekstilije in tekstilni izdelki - 4. del: Varnost otroških oblačil - Varnost pritrditve
pritrjenih delov, razen gumbov in kovinskih pritiskačev - Preskusna metodaTextiles and textile products - Part 4: Safety of children's clothing - Security of attachment
of components except buttons and metal mechanically applied press fasteners - Test
methodTextilien und textile Produkte - Sicherheit von Kinderbekleidung - Teil 4: Sicherheit der
Befestigung von Komponenten außer Knöpfen und mechanisch befestigtenDruckknöpfen - Prüfverfahren
Textiles et produits textiles - Partie 4 : Sécurité des vêtements d’enfants - Sécurité
d’attache des composants à l’exception des boutons et des boutons-pressionmétalliques appliqués mécaniquement - Méthode d’essai
Ta slovenski standard je istoveten z: FprCEN/TS 17394-4
ICS:
61.020 Oblačila Clothes
97.190 Otroška oprema Equipment for children
kSIST-TS FprCEN/TS 17394-4:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------kSIST-TS FprCEN/TS 17394-4:2019
---------------------- Page: 2 ----------------------
kSIST-TS FprCEN/TS 17394-4:2019
FINAL DRAFT
TECHNICAL SPECIFICATION
FprCEN/TS 17394-4
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
July 2019
ICS
English Version
Textiles and textile products - Part 4: Safety of children's
clothing - Security of attachment of components except
buttons and metal mechanically applied press fasteners -
Test method
Textiles et produits textiles - Partie 4 : Sécurité des Textilien und textile Produkte - Sicherheit von
vêtements d'enfants - Sécurité d'attache des Kinderbekleidung - Teil 4: Sicherheit der Befestigung
composants à l'exception des boutons et des boutons- von Komponenten außer Knöpfen und mechanisch
pression métalliques appliqués mécaniquement - befestigten Druckknöpfen - Prüfverfahren
Méthode d'essaiThis draft Technical Specification is submitted to CEN members for Vote. It has been drawn up by the Technical Committee
CEN/TC 248.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.Warning : This document is not a Technical Specification. It is distributed for review and comments. It is subject to change
without notice and shall not be referred to as a Technical Specification.EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprCEN/TS 17394-4:2019 E
worldwide for CEN national Members.---------------------- Page: 3 ----------------------
kSIST-TS FprCEN/TS 17394-4:2019
FprCEN/TS 17394-4:2019 (E)
Contents Page
European foreword ....................................................................................................................................................... 3
Introduction .................................................................................................................................................................... 4
1 Scope .................................................................................................................................................................... 5
2 Normative references .................................................................................................................................... 5
3 Terms and definitions ................................................................................................................................... 6
4 Principle ............................................................................................................................................................. 7
5 Sampling ............................................................................................................................................................. 7
5.1 Selection of test specimens and reference specimen ......................................................................... 7
6 Test methods .................................................................................................................................................... 7
6.1 Apparatus ........................................................................................................................................................... 7
6.2 Materials ............................................................................................................................................................. 8
6.3 Procedure........................................................................................................................................................... 8
6.3.1 Wash temperature and drying method ................................................................................................... 8
6.3.2 Initial assessment of test specimens ........................................................................................................ 8
6.3.3 Preparation of the washing machine ....................................................................................................... 8
6.3.4 Wash load ........................................................................................................................................................... 8
6.3.5 Detergent ........................................................................................................................................................... 8
6.3.6 Wash cycle ......................................................................................................................................................... 9
6.3.7 Rinsing and spinning ..................................................................................................................................... 9
6.3.8 Drying .................................................................................................................................................................. 9
6.3.9 Final assessment ............................................................................................................................................. 9
7 Test report ...................................................................................................................................................... 10
Annex A (normative) Nominal percentage compositon of EN ISO 6330:2012 Annex K non-
phosphate reference detergent 3 .......................................................................................................... 11
A.1 General warning ........................................................................................................................................... 11
A.2 ECE reference detergent 98 without optical brightener ................................................................ 11
Bibliography ................................................................................................................................................................. 12
---------------------- Page: 4 ----------------------kSIST-TS FprCEN/TS 17394-4:2019
FprCEN/TS 17394-4:2019 (E)
European foreword
This document (FprCEN/TS 17394-4:2019) has been prepared by Technical Committee CEN/TC 248
“Textiles and textile products”, the secretariat of which is held by BSI.This document is currently submitted to the vote on TS.
---------------------- Page: 5 ----------------------
kSIST-TS FprCEN/TS 17394-4:2019
FprCEN/TS 17394-4:2019 (E)
Introduction
The aim of this document is to assess the security of attachment of components except buttons and
metal mechanically applied press fasteners.This document provides a method of test. A document providing performance specification for infants'
clothing is under development.This document has been developed from Annex C of CEN/TR 16792:2014 Safety of children's clothing.
Recommendations for the design and manufacture of children's clothing - Mechanical safety.
The method given in this document involves a washing and drying process and provides an example of
a wash to assess the durability of attachment of components. It is not to assess the performance of the
garment. For this reason, the test conditions are much more aggressive than the conditions used in
normal laundering. The following is an example of suitable a wash test which gives a very aggressive
wash action. At the time of drafting this document, an equivalent wash programme for the Wascator
washing machine, as specified in EN ISO 6330, is not available.---------------------- Page: 6 ----------------------
kSIST-TS FprCEN/TS 17394-4:2019
FprCEN/TS 17394-4:2019 (E)
1 Scope
The method described in this document complements
— prEN 17394-2:2019, Safety of children's clothing – Security of attachment of buttons – Test Method
— FprCEN/TS 17394-3:2019, Safety of Children's Clothing - Security of Attachment of metal
mechanically applied press fasteners - Test methodand is applicable to all other components including labels, badges, sequins, rhinestones, eyelets and
non-metal press fasteners, which are too small to be gripped in test equipment jaws or their integrity is
disrupted by gripping.The performance requirements are provided in FprCEN/TS 17394-1:2019, Safety of children's clothing
- Security of attachment of attached components to Infants' clothing - Specification
The method is an extremely aggressive wash method has been developed to assess if the components
remain attached.It is specifically applicable to clothing, where the detachment of these components might result in
accidents to children.This document does not apply to:
a) child care articles;
b) shoes, boots and similar footwear;
c) toys (see Note 2);
d) other articles sold with clothing;
NOTE 1 The above items are covered by other CEN Technical Committees and as such are out of scope of this
document.NOTE 2 Toy disguise costumes including carnival costumes are examples of clothing which are also toys and
fall within the scope of the Toy Safety Directive.2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN ISO...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.