2001/95/EC - Directive 2001/95/EC of the European Parliament and of the Council of 3 December 2001 on general product safety

20201123 - TC - Corrects the element designation from "Mg" to "Mn" in the 12th dash of 6.1

This European Standard specifies safety requirements and test methods relating to the materials, construction, performance, packaging and product information for:
-  Re-usable feeding teats and drinking accessories;
-  Re-usable feeding bottles and drinking cups;
-  Single-use feeding bottles, feeding teats, feeding bags and drinking accessories, which do not contain fluid when purchased.
It does not apply to drinking equipment designed for medical applications or for use under medical supervision.
This document is not applicable to soothers.
Note: Safety requirements and test methods for soothers are specified in EN 1400.

This document specifies functional requirements (see Clause 3) and specific safety requirements in addition to the general safety requirements in EN 913 (see Clause 4), which is read in conjunction with this standard.
This document is applicable to two types of parallel bars (see Table 1) intended for use under supervision of a competent person.

This classification covers bicycle usage conditions and a method of identifying bicycles and components for use within that system.
This classification provides a uniform set of usage definitions within the bicycle industry. Included within this classification is a set of graphical indicators to provide retailers and consumers with an indication of the intended use of a particular bicycle or aftermarket components.

EN-IEC 62368-1 is a product safety standard that classifies energy sources, prescribes safeguards against those energy sources, and provides guidance on the application of, and requirements for, those safeguards. The prescribed safeguards are intended to reduce the likelihood of pain, injury and, in the case of fire, property damage. The objective of the INTRODUCTION is to help designers to understand the underlying principles of safety in order to design safe equipment. These principles are informative and not an alternative to the detailed requirements of this document.

This European Standard specifies the requirements, tests and marking of hinged combination ladders with one or several hinge joints.
This European Standard is not applicable to hinge-joints of combination and standing ladders as defined by EN 131 1.
This part of the standard is intended to be used in conjunction with EN 131 1, EN 131 2 and EN 131 3.

This European Standard specifies safety requirements for free standing children's high chairs that elevate  children to dining table height usually for the purposes of feeding or eating. Children's high chairs are for children up to 3 years of age who are capable of sitting unaided.
With the exception of special high chairs for medical purposes, this standard applies to children's high chairs for domestic and non-domestic use.
NOTE   If a children's high chair has to or can be converted into other functions, additional European Standards may apply.

This document specifies the requirements, tests and marking of hinged combination ladders with one or several hinge joints.
This document is not applicable to hinge-joints of combination and standing ladders as defined by EN 131-1.
This part of the standard is intended to be used in conjunction with EN 131-1, EN 131-2 and EN 131-3.

2019-10-01: BT decision D163/015.: decouple from OJEU citation process
2019-09-02 NEXT STEP: BT consultation on 1 Oct. 2019
2019-09-02: doc for BT meeting 1 Oct asking to decouple + no HAS assessment needed
2019-08-06 text for FV submitted, asking to decouple from OJEU
2019-05-24 TC 108X+CCMC+EC+HAS Cons comments resolution meeting
2019-03-15 - GEM - issues with ENQ text for PR= 67625 - way forward proposed to TC (incl. WS with EC)
2019-03-01 GEM:  HAS assessment challenged
2018-11-09 - GEM - project is extremely important and urgent  for industry. The standard needs to be 'harmonized', it is imperative to get to a positive assessment prior to launching ENQ. --> See GEM before starting any action
2018-07-09 - GEM - Common modifications to prEN 62368-1 (PR = 67625)..
Synchronyze enquiry with enquiry for  adoption of  IEC 62368-1 Ed.3 (PR=67625).
HAS Consultant assessment of main + amdt required - assessment to be triggered by Common Mods.

This European Standard is applicable to the processes relating to the preparing for re-use of WEEE.
NOTE 1   This European Standard covers the preparing for re-use of WEEE arising from electrical and electronic equipment as listed in Annex I and Annex III of Directive 2012/19/EU.
This European Standard is applicable to preparing for re-use operators only and does not cover activities connected with used or second-hand equipment that have not become waste. It applies to all preparing for re-use operators, no matter their size or main focus of activity.
This European Standard assists in quantifying re-use, recycling and recovery rates in conjunction with EN 50625-1.
In case of treatment operations (including the collection and logistics of WEEE) other than preparing for re-use the EN 50625 series applies.
Preparing for re-use processes can include the removal of whole components or parts where they are intended to either be used in the repair of faulty equipment or sold as re-use parts.
The following EEE are not in the scope of this standard:
-    industrial monitoring and control instruments;
-    in vitro diagnostic medical devices, medical devices or active implantable devices.
NOTE 2   Examples of industrial monitoring and control instruments include equipment intended for use in potentially explosive atmospheres, and monitoring and control equipment that performs a safety function as part of industrial control system.
NOTE 3   In vitro diagnostic medical devices, medical devices and active implantable devices have the capacity to collect and harbour pathogens, depending on the environment in which they operated. It is essential to follow clinically proven means for decontamination. Relevant Directives are 93/42/EEC and 98/79/EC.

This European Standard specifies safety requirements for free standing children's high chairs that elevate  children to dining table height usually for the purposes of feeding or eating. Children's high chairs are for children up to 3 years of age who are capable of sitting unaided.
With the exception of special high chairs for medical purposes, this standard applies to children's high chairs for domestic and non-domestic use.
NOTE   If a children's high chair has to or can be converted into other functions, additional European Standards may apply.

This document is applicable to the processes relating to the preparing for re-use of WEEE. NOTE 1 This document covers the preparing for re-use of WEEE arising from electrical and electronic equipment as listed in Annex I and Annex III of Directive 2012/19/EU. This document is applicable to preparing for re-use operators only and does not cover activities connected with used or second-hand equipment that have not become waste. It applies to all preparing for re-use operators, no matter their size or main focus of activity. This document assists in quantifying re-use, recycling and recovery rates in conjunction with EN 50625 1. In case of treatment operations (including the collection and logistics of WEEE) other than preparing for re-use, the EN 50625 series applies. Preparing for re-use processes includes the removal of whole components or parts where they are intended to either be used in the repair of faulty equipment or sold as re-use parts. The following EEE are not in the scope of this document: - industrial monitoring and control instruments; - in vitro diagnostic medical devices, medical devices or active implantable devices. NOTE 2 Examples of industrial monitoring and control instruments include equipment intended for use in potentially explosive atmospheres, and monitoring and control equipment that performs a safety function as part of industrial control system. NOTE 3 in vitro diagnostic medical devices, medical devices and active implantable devices have the capacity to collect and harbour pathogens, depending on the environment in which they operated. It is essential to follow clinically proven means for decontamination. Relevant Directives are 93/42/EEC and 98/79/EC.

This European Standard specifies safety requirements for cribs (including cradles, suspended baby beds and bedside sleepers) for domestic and non-domestic use with an internal length of the base less than or equal to 900 mm used to lay young babies for sleeping until they are able to sit unaided, or push up on its hands and knees. Products that can be converted into other items may be covered by other relevant European standards.
Electrical safety is not covered in this standard.
This standard does not cover cribs used for medical purposes.
Mattresses provided with the crib are not covered by this standard.

This document specifies safety requirements and test methods for cribs (including cradles, suspended cribs and bedside sleepers) for domestic and non-domestic use.
The requirements apply to cribs with a maximum internal length of crib base of 900 mm which are intended to provide sleeping accommodation for infants, until they are able to sit unaided or pull or push themselves up on their hands and knees.
This document does not apply to electrical safety.
It does not apply to cribs used for medical purposes or used in hospitals.
Products that can be converted into other items may be covered by other relevant European Standards.
Annex A (informative) includes a rationale.
Annex B (informative) includes an A-deviation.

This European Standard defines terms and specifies the general design characteristics of ladders.
It applies to portable ladders.
It does not apply to ladders designed for specific professional use such as fire brigade ladders, roof ladders and mobile ladders.
NOTE 1   For multiple hinge joint ladders EN 131-4 applies.
NOTE 2   For telescopic ladders EN 131-6 applies.
NOTE 3   For mobile ladders with platforms EN 131-7 applies.
NOTE 4   This standard does not apply to step stools for which EN 14183 applies.

This European Standard defines terms and specifies the general design characteristics of ladders.
It applies to portable ladders.
It does not apply to ladders designed for specific professional use such as fire brigade ladders, roof ladders and mobile ladders.
NOTE 1   For multiple hinge joint ladders EN 131-4 applies.
NOTE 2   For telescopic ladders EN 131-6 applies.
NOTE 3   For mobile ladders with platforms EN 131-7 applies.
NOTE 4   This standard does not apply to step stools for which EN 14183 applies.

This European Standard specifies the general design features, requirements and test methods and defines terms for leaning and standing telescopic ladders.
Ladders with extension elements are not covered by this part of EN 131.
This part of the standard is intended to be used in conjunction with EN 131-1:2007+A1:2011, EN 131 2:2010+A1:2012, EN 131-3:2007 and if applicable EN 131-4:2007.

This European Standard specifies safety requirements for children's cots for domestic use with an
internal length greater than 900 mm but not more than 1 400 mm.
The requirements apply to a cot that is fully assembled and ready for use.
For cots that can be converted into other items e.g. changing units, playpens additional requirements
can apply.
This European Standard does not apply to carry cots, cribs and cradles for which a separate European
standard exists.

IEC corrigendum

This European Standard specifies safety requirements and test methods for children’s bath tubs and stands and for non stand-alone bathing aids that are intended to be used in conjunction with a children’s bath tub.
This European Standard does not cover children’s bath tubs and stands designed for children with special needs.
NOTE: If the product has several functions or can be converted into another function, the relevant European Standards apply to it.

This European Standard specifies safety requirements for children's cots for domestic use with an internal length greater than 900 mm but not more than 1 400 mm.
The requirements apply to a cot that is fully assembled and ready for use.
For cots that can be converted into other items e.g. changing units, playpens additional requirements can apply.
This European Standard does not apply to carry cots, cribs and cradles for which a separate European standard exists.

This document specifies the general design features, requirements and test methods and defines terms for leaning and standing telescopic ladders.
Ladders with extension elements are not covered by this part of EN 131.
This part of the standard is intended to be used in conjunction with EN 131 1, EN 131 2, EN 131 3 and if applicable EN 131 4.

This document specifies requirements for lighters to ensure a reasonable degree of safety for normal
use or reasonably foreseeable misuse of such lighters by users.
This document applies to all flame-producing products commonly known as cigarette lighters, cigar
lighters and pipe lighters.
It does not apply to matches and flame-producing products intended solely for igniting materials other
than cigarettes, cigars, and pipes.

This document specifies requirements for lighters to ensure a reasonable degree of safety for normal use or reasonably foreseeable misuse of such lighters by users.
This document applies to all flame-producing products commonly known as cigarette lighters, cigar lighters and pipe lighters.
It does not apply to matches and flame-producing products intended solely for igniting materials other than cigarettes, cigars, and pipes.

This European Standard specifies safety requirements and test methods for stand-alone bathing aids.
This European Standard does not cover bathing aids and bath rings designed for children with special needs.
NOTE 1   Non stand-alone bathing aids that are intended to be used in conjunction with a child’s bath tub are covered in WI 00252100, Child use and care articles - Bath tubs for children.
NOTE 2    If the product has several functions or can be converted into another function, the relevant European Standards apply.

This European Standard specifies general safety requirements and test methods for all pieces of gymnastic and sports equipment and for all pieces of equipment for the use of physical education, training and competition, intended for use supervised by a competent person and not specified in other, individual standards and/or federation rules.
This European Standard is not applicable to other sport equipment, playground equipment, stationary training equipment or educational training equipment.

This document specifies safety requirements and test methods for children’s bath tubs and stands and for non-standalone bathing aids that are designed and intended to be used only in conjunction with a children’s bath tub.
This document does not cover children’s bath tubs and stands and non-standalone bathing aids designed for children with special needs.
NOTE 1   Standalone bathing aids are covered in EN 17022.
NOTE 2   Where the product has several functions or can be converted into another function it is due to comply with relevant standard(s).

This document specifies general safety requirements and test methods for all pieces of gymnastic and sports equipment and for all pieces of equipment for the use of physical education, training and competition, intended for use supervised by a competent person and not specified in other, individual standards and/or federation rules.

This document specifies safety requirements and test methods for standalone bathing aids intended to be used in a bath tub.
This European Standard does not cover bathing aids designed for children with special needs.
Bathing aids that are intended to be used only in conjunction with a child’s bath tub are not covered by this standard.
NOTE 1   Non-standalone bathing aids that are intended to be used only in conjunction with a child’s bath tub are covered in FprEN 17072:2018, Child care articles - Bath tubs, stands and non-standalone bathing aids - Safety requirements and test methods.
NOTE 2   Where the product has several functions or can be converted into another function it is due to comply with relevant standard(s).

This European Standard specifies safety requirements relating to the materials, construction, performance, packaging and product information for soothers.
This European Standard is applicable to products that resemble or function as a soother. Some soothers may be marketed with other functions. This standard is applicable to these products (some examples are given in Annex C).
This European Standard does not apply to products designed for specialist clinical medical applications, e.g. those relating to Pierre-Robin Syndrome or premature babies (see Annex C).
The standard is not applicable to feeding teats. Safety requirements and test methods for feeding teats are included in all parts of EN 14350 [2], [3].

This European Standard specifies requirements for the safety of children's cot duvets, excluding
removable duvet covers, used in the child’s sleeping environment (i.e. not under supervision), and
designed to provide sufficient warmth when sleeping in a cot or similar product (e.g. crib/cradle) in
which a child is contained. This document specifies requirements for cot duvets suitable for children up
to 36 months. Cot duvets with permanent decorative outer fabrics also known as cot quilts or coverlet
are also in the scope.
NOTE The informative Annex E lists topics of further investigations which might lead to necessary
improvement of the safety requirements of children's cot duvets.
The requirements for removable cot duvet covers are excluded from this document and are covered in
EN 16779-2.
If a part of the children's cot duvet is designed to offer additional function (e.g. play function), in
addition of the following requirements, this part will be subjected to safety requirements related to
relevant standards (see A.1).

This European Standard specifies requirements for the safety of children's cot bumpers used in the
children's sleeping environment (i.e. not under supervision) when sleeping in a cot or similar product
(e.g. crib/cradle) in which a child is contained.
NOTE The informative Annex C lists topics of further investigation which might lead to necessary
improvement of the safety requirements of cot bumpers.
If a part of the children's cot bumpers is designed to offer additional function (e.g. play function), this
part will, in addition to the following requirements, be subjected to safety requirements related to
relevant standards (see A.1).

This document specifies requirements for the safety of children's sleep bags which are used in the
children's sleeping environment (i.e. not under supervision), and designed to provide sufficient warmth
so as to remove the need for additional bedding when sleeping in a cot or similar product (e.g.
crib/cradle) in which a child is contained. It is applicable to products for use by younger children based
on the ability of the children to not being able to climb out of the cot (approximately under the age of 24
months).
NOTE The informative Annex D lists topics of further investigations, which might lead to necessary
improvement of the safety requirements of children's sleep bags.
This document does not apply to products designed for use during the care of premature children or
children of low birthweight or for outdoor use or to products designed to keep a child warm in a
pushchair or car seats (e.g. foot muff).
If a part of the children's sleep bag is designed to offer additional function (e.g. play function), this part
will, in addition to the following requirements, be subjected to safety requirements related to relevant
standards (see A.1).

This European Standard specifies safety requirements relating to the materials, construction, performance, packaging and product information for soothers.
This European Standard is applicable to products that resemble or function as a soother. Some soothers may be marketed with other functions. This standard is applicable to these products (some examples are given in Annex C).
This European Standard does not apply to products designed for specialist clinical medical applications, e.g. those relating to Pierre-Robin Syndrome or premature babies (see Annex C).
The standard is not applicable to feeding teats. Safety requirements and test methods for feeding teats are included in all parts of EN 14350 [2], [3].

This draft European Standard specifies requirements for the safety of children's cot duvets, excluding removable duvet covers, used in the child’s sleeping environment (i.e. not under supervision), and designed to provide sufficient warmth when sleeping in a cot or similar product (e.g. crib/cradle) in which a child is contained. This document specifies requirements for cot duvets suitable for children up to 36 months. Cot duvets with permanent decorative outer fabrics also known as cot quilts or coverlet are also in the scope.
NOTE   The informative Annex E lists topics of further investigations which might lead to necessary improvement of the safety requirements of children's cot duvets.
The requirements for removable cot duvet covers are excluded from this document and are covered in prEN 16779 2 (in preparation).
If a part of the children's cot duvet is designed to offer additional function (e.g. play function), in addition of the following requirements, this part will be subjected to safety requirements related to relevant standards (see A.1).

This document specifies requirements for the safety of children's sleep bags which are used in the children's sleeping environment (i.e. not under supervision), and designed to provide sufficient warmth so as to remove the need for additional bedding when sleeping in a cot or similar product (e.g. crib/cradle) in which a child is contained. It is applicable to products for use by younger children based on the ability of the children to not being able to climb out of the cot (approximately under the age of 24 months).
NOTE   The informative Annex D lists topics of further investigations, which might lead to necessary improvement of the safety requirements of children's sleep bags.
This document does not apply to products designed for use during the care of premature children or children of low birthweight or for outdoor use or to products designed to keep a child warm in a pushchair or car seats (e.g. foot muff).
If a part of the children's sleep bag is designed to offer additional function (e.g. play function), this part will, in addition to the following requirements, be subjected to safety requirements related to relevant standards (see A.1).

This European Standard specifies requirements for the safety of children's cot bumpers used in the children's sleeping environment (i.e. not under supervision) when sleeping in a cot or similar product (e.g. crib/cradle) in which a child is contained.
NOTE   The informative Annex C lists topics of further investigation which might lead to necessary improvement of the safety requirements of cot bumpers.
If a part of the children's cot bumpers is designed to offer additional function (e.g. play function), this part will, in addition to the following requirements, be subjected to safety requirements related to relevant standards (see A.1).

This part of this European Standard is applicable to barbecues which burn solid fuels, except single use barbecues. Barbecues which are intended to be converted from other fuels to solid fuels also should conform to this standard.
This European Standard specifies requirements for materials, construction, design, test methods, markings and instructions relating to them.

This document specifies safety requirements for stepper, stairclimber and climber machines (hereafter
called training equipment) performed from either a standing or sitting position. The requirements are
in addition to the general safety requirements of ISO 20957-1, with which this document is intended to
be read in conjunction.
This document is applicable to stationary training equipment type stepper, stairclimber and climber
training equipment, within classes S and H. Additional requirements are provided for accuracy class A.

This part of EN 957 specifies safety requirements for exercise bicycles with a fixed wheel or without freewheel that have an inertia of > 0,6 kg x m² in addition to the general safety requirements of EN 957-1 and should be read in conjunction with it. This part of EN 957 is applicable to stationary training equipment type exercise bicycle with a fixed wheel or without freewheel (type 10) within the classes S and H. Any attachment provided with the exercise bicycle with a fixed wheel or without freewheel for the performance of additional exercises are subject to the requirements of EN 957-1.

This European Standard advises on the safe use of ladders covered by the scope of EN 131 1 and fulfilling the requirements of EN 131 1, EN 131 2 and, for single or multiple hinged-joint ladders, EN 131 4, for telescopic ladders EN 131 6 and for mobile platform ladders EN 131 7.

This part of this European Standard is applicable to barbecues which burn solid fuels, except single use barbecues. Barbecues which are intended to be converted from other fuels to solid fuels also should conform to this standard.
This European Standard specifies requirements for materials, construction, design, test methods, markings and instructions relating to them.

ISO 20957-10:2017 specifies safety requirements for exercise bicycles with a fixed wheel or without freewheel that have an inertia of >0,6 kg·m2. The requirements are in addition to the general safety requirements of ISO 20957‑1, with which ISO 20957-10:2017 is intended to be read in conjunction.
Any attachment provided with the exercise bicycle with a fixed wheel or without freewheel for the performance of additional exercises is subject to the requirements of ISO 20957‑1.

ISO 20957-8.2017 specifies safety requirements for stepper, stairclimber and climber machines (hereafter called training equipment) performed from either a standing or sitting position. The requirements are in addition to the general safety requirements of ISO 20957‑1, with which ISO 20957-8.2017 is intended to be read in conjunction.
ISO 20957-8.2017 is applicable to stationary training equipment type stepper, stairclimber and climber training equipment, within classes S and H. Additional requirements are provided for accuracy class A.

This European Standard is applicable for CLASS C classified floating leisure articles for use on and in water according to EN 15649-1 regardless of whether the buoyancy is achieved by inflation or inherent buoyant material.
This document (EN 15649-5) is applicable with EN 15649-1 and EN 15649-2.

This European Standard is applicable for CLASS E floating leisure articles for use on and in water according to EN 15649-1 regardless whether the buoyancy is achieved by inflation or inherent buoyant material.
This document (EN 15649-7) is applicable with EN 15649-1 and EN 15649-2.
Class E devices are intended for use in bathing areas or in protected and safe shore zones.

This European Standard is applicable for CLASS D floating leisure articles for use on and in water according to EN 15649-1 regardless whether the buoyancy is achieved by inflation or inherent buoyant material.
This document (EN 15649-6) is applicable with EN 15649-1 and EN 15649-2.

This European Standard specifies safety requirements and test methods related to materials, safety, performance and consumer information for classified floating leisure articles for use on and in the water according to EN 15649-1.
This document is applicable with EN 15649-1 and EN 15649-2.
This European Standard is applicable for Class B floating leisure articles for use on and in the water according to EN 15649-1 regardless whether the buoyancy is achieved by inflation or inherent buoyant material.Class B devices provide a buoyant structure with one or more body openings into which the user is positioned partly immersed.