FprCEN/TS 17723
(Main)Plant biostimulants - Determination of chloride
Plant biostimulants - Determination of chloride
This document specifies a potentiometric method for the determination of chloride (Cl-) content in the presence or in the absence of organic material. This method is applicable to plant biostimulants.
Biostimulanzien für die pflanzliche Anwendung - Chloridbestimmung
In diesem Dokument wird ein potentiometrisches Verfahren zur Bestimmung des Gehalts an Chlorid (Cl−) bei Vorhandensein oder Nichtvorhandensein von organischem Material festgelegt. Dieses Verfahren ist anwendbar auf Biostimulanzien für die pflanzliche Anwendung.
Rastlinski biostimulansi - Določevanje klorida
General Information
Standards Content (sample)
SLOVENSKI STANDARD
kSIST-TS FprCEN/TS 17723:2021
01-november-2021
Rastlinski biostimulansi - Določevanje klorida
Plant biostimulants - Determination of chloride
Biostimulanzien für die pflanzliche Anwendung - Chloridbestimmung
Ta slovenski standard je istoveten z: FprCEN/TS 17723
ICS:
65.080 Gnojila Fertilizers
kSIST-TS FprCEN/TS 17723:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------kSIST-TS FprCEN/TS 17723:2021
---------------------- Page: 2 ----------------------
kSIST-TS FprCEN/TS 17723:2021
FINAL DRAFT
TECHNICAL SPECIFICATION
FprCEN/TS 17723
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
September 2021
ICS 65.080
English Version
Plant biostimulants - Determination of chloride
Biostimulanzien für die pflanzliche Anwendung -
Chloridbestimmung
This draft Technical Specification is submitted to CEN members for Vote. It has been drawn up by the Technical Committee
CEN/TC 455.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.Warning : This document is not a Technical Specification. It is distributed for review and comments. It is subject to change
without notice and shall not be referred to as a Technical Specification.EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprCEN/TS 17723:2021 E
worldwide for CEN national Members.---------------------- Page: 3 ----------------------
kSIST-TS FprCEN/TS 17723:2021
FprCEN/TS 17723:2021 (E)
Contents Page
European foreword ........................................................................................................................................... 3
Introduction ........................................................................................................................................................ 4
1 Scope ........................................................................................................................................................ 5
2 Normative references ........................................................................................................................ 5
3 Terms and definitions ....................................................................................................................... 5
4 Sampling ................................................................................................................................................. 5
5 Principle ................................................................................................................................................. 5
5.1 Interferences ......................................................................................................................................... 5
6 Reagents ................................................................................................................................................. 6
7 Apparatus ............................................................................................................................................... 6
8 Procedure ............................................................................................................................................... 6
8.1 Measurement temperature ............................................................................................................. 6
8.2 Preparation of the test portion ...................................................................................................... 6
8.3 Blank test ................................................................................................................................................ 7
8.4 Titration .................................................................................................................................................. 7
8.4.1 Test portion (sample) ........................................................................................................................ 7
8.4.2 Blank test ................................................................................................................................................ 7
8.5 Recovery test ......................................................................................................................................... 7
9 Expression of results .......................................................................................................................... 7
10 Test report ............................................................................................................................................. 9
Annex A (Informative) Preparation and standardization of 0,1 mol/l Silver Nitrate solution
................................................................................................................................................................. 10
Annex B (Informative) More exact calculation of the equivalence point of the titration.... 11
Bibliography ..................................................................................................................................................... 12
---------------------- Page: 4 ----------------------kSIST-TS FprCEN/TS 17723:2021
FprCEN/TS 17723: 2021 (E)
European foreword
This document (FprCEN/TS 17723:2021) has been prepared by Technical Committee CEN/TC455
“Plant Biostimulants”, the secretariat of which is held by AFNOR.This document is currently submitted to the Vote on TS.
This document has been prepared under a Standardization Request given to CEN by the European
Commission and the European Free Trade Association.---------------------- Page: 5 ----------------------
kSIST-TS FprCEN/TS 17723:2021
FprCEN/TS 17723:2021 (E)
Introduction
This document was prepared by the experts of CEN/TC 455 ‘Plant Biostimulants’. The European
Committee for Standardization (CEN) was requested by the European Commission (EC) to draft
European standards or European standardization deliverables to support the implementation of
Regulation (EU) 2019/1009 Of 5 June 2019 laying down rules on the making available on the market
of EU fertilising products (“FPR” or “Fertilising Products Regulation”). This request, presented as
SReq M/564, also contributes to the Communication on “Innovating for Sustainable Growth: A Bio
economy for Europe”. The Working Group 5 “Labelling and denominations”, was created to develop
a work program as part of this request.The technical committee CEN/TC 455 ‘Plant Biostimulants’ was established to carry out the work
program that will prepare a series of standards. The interest in biostimulants has increased
significantly in Europe as a valuable tool to use in agriculture. Standardization was identified as
having an important role in order to promote the use of biostimulants. The work of CEN/TC 455
seeks to improve the reliability of the supply chain, thereby improving the confidence of farmers,
industry, and consumers in biostimulants, and will promote and support commercialization of the
European biostimulant industry.To improve the market of EU Plant Biostimulants products, they should be labelled in accordance
with the labelling requirements set out in Annex III of Regulation 2019/1009 [5], which prescribes
that the phrase “poor in chloride” or similar may only be used if the chloride (Cl ) content is below
30 g/kg of dry matter.This means that the manufacturer has the possibility to note on the label that the Plant Biostimulant
is “poor in chloride”, only if the manufacturer has done the analysis and the chloride content is well
below 30 g/kg of dry matter.The trend of the last few years is to reduce the use of harmful chemicals both for operators and the
environment, favouring the use of the most advanced technologies that have a lower impact;
therefore the potentiometric is preferable to other techniques.Furthermore, the potentiometric method is not influenced by interferences due to colour or turbidity
of the sample solution.WARNING – Persons using this document should be familiar with usual laboratory practice. This
document does not purport to address all of the safety issues, if any, associated with its use. It is the
responsibility of the user to establish appropriate health and safety practices and to ensure
compliance with any national regulatory conditions.IMPORTANT – It is absolutely essential that tests conducted according to this document are carried
out by suitably trained staff.---------------------- Page: 6 ----------------------
kSIST-TS FprCEN/TS 17723:2021
FprCEN/TS 17723: 2021 (E)
1 Scope
This document specifies a potentiometric method for the determination of chloride (Cl ) content in
the presence or in the absence of organic material. This method is applicable to plant biostimulants.
2 Normative referencesThe following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.FprCEN/TS 17702-2, Plant biostimulants – Sampling and sample preparation – Part 2: Sample
preparationFprCEN/TS 17724, Plant Biostimulants – Terminology
EN ISO 3696:1995, Water for analytical laboratory use - Specification and test methods (ISO
3696:1987)3 Terms and definitions
For the purposes of this document, the terms and definitions given in FprCEN/TS 17724 and the
following apply.3.1
chloride content of plant biostimulants
mass fraction of chlorides, expressed in g/kg of dry matter, determined in accordance with the
procedure described in this document4 Sampling
Sampling is not part of this method specified in this document. A recommended sampling method is
given in FprCEN/TS 17702-1.Laboratory sample preparation shall be carried out in accordance with FprCEN/TS 17702-2.
Homogeneous samples are recommended.5 Principle
5.1 General
Soluble chlorides are extracted from the sample with water containing nitric acid. The chloride
content of the solution is titrated with silver nitrate standard solution and the end point is
determined potentiometrically by using either a silver ion selective electrode plus a reference
electrode or a combined electrode.5.2 Interferences
Maintain the sample at a lower pH can avoid the silver ion interact with OH to form silver oxide
(Ag O) precipitation, minimize other anionic ions interference with the AgCl formation, and improve
the binding between the titrant and the analyte.---------------------- Page: 7 ----------------------
kSIST-TS FprCEN/TS 17723:2021
FprCEN/TS 17723:2021 (E)
6 Reagents
Use only reagents of recognized analytical grade.
6.1 Water
Water free from chlorides in compliance with quality grade 2, according to EN ISO 3696:1995 shall
be used.6.2 Nitric acid solution
Nitric acid solution: dilute 1:1 concentrated nitric acid (70 %) with water (6.1).
6.3 Silver nitrate standard solution, c = 0,1 mol/l sol...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.