FprCEN/TS 17701-1
(Main)Plant biostimulants - Determination of specific elements - Part 1: Digestion by aqua regia for subsequent determination of elements
Plant biostimulants - Determination of specific elements - Part 1: Digestion by aqua regia for subsequent determination of elements
This document specifies the procedure for the digestion of different plant biostimulants with aqua regia to enable a subsequent determination of arsenic (As), cadmium (Cd), copper (Cu), chromium (Cr), mercury (Hg), nickel (Ni), lead (Pb) and zinc (Zn). The procedure can be also applied for determination of other elements. The procedure is applicable for all solid and/or liquid plant biostimulants.
This document is also applicable to the blends of fertilizing products where plant biostimulants are the main part of the blend. Otherwise, the Technical Specification for the main part of the blend applies.
The extracts are suitable for analysis using CEN/TS 17701-2 (ICP-AES) and CEN/TS 17701-3 (Hg analysis).
NOTE Alternatively, inductively coupled plasma mass spectrometry (ICP-MS) can be used for the measurement if the user proves that the method gives the same results.
Biostimulanzien für die pflanzliche Anwendung - Bestimmung spezifischer Elemente - Teil 1: Aufschluss durch Königswasser zur anschließenden Bestimmung der Elemente
Dieses Dokument legt die Verfahrensweise für den Aufschluss verschiedener Biostimulanzien für die pflanzliche Anwendung mit Königswasser fest, um eine anschließende Bestimmung von Arsen (As), Cadmium (Cd), Kupfer (Cu), Chrom (Cr), Quecksilber (Hg), Nickel (Ni), Blei (Pb) und Zink (Zn) zu ermöglichen. Die Verfahrensweise kann auch für die Bestimmung anderer Elemente verwendet werden. Die Verfahrensweise gilt für alle festen und/oder flüssigen Biostimulanzien für die pflanzliche Anwendung.
Dieses Dokument gilt auch für die Mischungen von Düngeprodukten, in denen die Biostimulanzien für die pflanzliche Anwendung der Hauptbestandteil der Mischung sind. Andernfalls gilt die Technische Spezifikation für den Hauptbestandteil der Mischung.
Die Extrakte sind für die Analyse nach CEN/TS 17701-2 (ICP AES) und CEN/TS 17701-3 (Quecksilber-Analyse) geeignet.
ANMERKUNG Alternativ kann die Massenspektrometrie mit induktiv gekoppeltem Plasma (ICP MS) für die Messung genutzt werden, sofern der Anwender nachweist, dass das Verfahren zu den gleichen Ergebnissen führt.
Biostimulants des plantes - Détermination des éléments spécifiques - Partie 1 : Digestion par eau régale pour la détermination subséquente des éléments
Rastlinski biostimulansi - Določevanje specifičnih elementov - 1. del: Razklop z zlatotopko za določevanje elementov
General Information
Standards Content (sample)
SLOVENSKI STANDARD
kSIST-TS FprCEN/TS 17701-1:2021
01-november-2021
Rastlinski biostimulansi - Določevanje določenih elementov - 1. del: Razklop z
zlatotopko za določevanje elementov
Plant biostimulants - Determination of specific elements - Part 1: Digestion by aqua regia
for subsequent determination of elementsBiostimulanzien für die pflanzliche Anwendung - Bestimmung spezifischer Elemente -
Teil 1: Aufschluss durch Königswasser zur anschließenden Bestimmung der ElementeBiostimulants des plantes - Détermination des éléments spécifiques - Partie 1 : Digestion
par eau régale pour la détermination subséquente des élémentsTa slovenski standard je istoveten z: FprCEN/TS 17701-1
ICS:
65.080 Gnojila Fertilizers
kSIST-TS FprCEN/TS 17701-1:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------kSIST-TS FprCEN/TS 17701-1:2021
---------------------- Page: 2 ----------------------
kSIST-TS FprCEN/TS 17701-1:2021
FINAL DRAFT
TECHNICAL SPECIFICATION
FprCEN/TS 17701-1
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
September 2021
ICS 65.080
English Version
Plant biostimulants - Determination of specific elements -
Part 1: Digestion by aqua regia for subsequent
determination of elements
Biostimulants des plantes - Détermination des Biostimulanzien für die pflanzliche Anwendung -
éléments spécifiques - Partie 1 : Digestion par eau Bestimmung spezifischer Elemente - Teil 1: Aufschluss
régale pour la détermination subséquente des durch Königswasser zur anschließenden Bestimmung
éléments der ElementeThis draft Technical Specification is submitted to CEN members for Vote. It has been drawn up by the Technical Committee
CEN/TC 455.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.Warning : This document is not a Technical Specification. It is distributed for review and comments. It is subject to change
without notice and shall not be referred to as a Technical Specification.EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprCEN/TS 17701-1:2021 E
worldwide for CEN national Members.---------------------- Page: 3 ----------------------
kSIST-TS FprCEN/TS 17701-1:2021
FprCEN/TS 17701-1:2021 (E)
Contents Page
European foreword ....................................................................................................................................................... 3
Introduction .................................................................................................................................................................... 4
1 Scope .................................................................................................................................................................... 5
2 Normative references .................................................................................................................................... 5
3 Terms and definitions ................................................................................................................................... 5
4 Principle ............................................................................................................................................................. 5
5 Sampling and sample preparation ............................................................................................................ 5
6 Reagents ............................................................................................................................................................. 5
7 Apparatus ........................................................................................................................................................... 6
8 Procedure........................................................................................................................................................... 6
9 Test report ......................................................................................................................................................... 7
Annex A (informative) Adjustment to different digestion procedures and measurement
apparatuses ....................................................................................................................................................... 8
A.1 Adjustment of the procedure to different final volumes .................................................................. 8
A.2 Calculation of the sample weight ............................................................................................................... 8
A.2.1 General ................................................................................................................................................................ 8
A.2.2 Calculation of the weight of the sample – dry matter......................................................................... 9
A.2.3 Calculation of the weight of the sample for analysis .......................................................................... 9
A.2.4 Example .............................................................................................................................................................. 9
Bibliography ................................................................................................................................................................. 10
---------------------- Page: 4 ----------------------kSIST-TS FprCEN/TS 17701-1:2021
FprCEN/TS 17701-1:2021 (E)
European foreword
This document (FprCEN/TS 17701-1:2021) has been prepared by the Technical Committee CEN/TC 455
“Plant Biostimulants”, the secretariat of which is held by AFNOR.This document is currently submitted to the Vote on TS.
The CEN/TS 17701 series, Plant biostimulants - Determination of specific elements, consists of the
following parts:— CEN/TS 17701-1, Plant biostimulants - Determination of specific elements - Part 1: Digestion by aqua
regia for subsequent determination of elements;— CEN/TS 17701-2, Plant biostimulants - Determination of specific elements - Part 2: Determination of
total content of Cd, Pb, Ni, As, Cr, Cu and Zn;— CEN/TS 17701-3, Plant biostimulants - Determination of specific elements - Part 3: Determination of
mercury.---------------------- Page: 5 ----------------------
kSIST-TS FprCEN/TS 17701-1:2021
FprCEN/TS 17701-1:2021 (E)
Introduction
This document was prepared by the experts of CEN/TC 455 ‘Plant Biostimulants’. The European
Committee for Standardization (CEN) was requested by the European Commission (EC) to draft
European standards or European standardization deliverables to support the implementation of
Regulation (EU) 2019/1009 of 5 June 2019 laying down rules on the making available on the market of
EU fertilising products (“FPR” or “Fertilising Products Regulation”).This request, presented as SR M/564, also contributes to the Communication on “Innovating for
Sustainable Growth: A Bio economy for Europe”. The Working Group 4 “Other safety parameters”, was
created to develop a work program as part of this Request. The technical committee CEN/TC 455 ‘Plant
Biostimulants’ was established to carry out the work program that will prepare a series of standards. The
interest in biostimulants has increased significantly in Europe as a valuable tool to use in agriculture.
Standardization was identified as having an important role in order to promote the use of biostimulants.
The work of CEN/TC 455 seeks to improve the reliability of the supply chain, thereby improving the
confidence of farmers, industry, and consumers in biostimulants, and will promote and support
commercialisation of the European biostimulant industry.The preparation of this document is based on a standardization request to CEN by the European
Commission and the European Free Trade Association (Mandate M/564) concerning the modernization
of methods of analysis of fertilizers in the framework of Regulation (EU) 2019/1009 of the European
Parliament and of the Council.Aqua regia is applied to digest different matrices for the subsequent determination of many elements.
For example, a multi-matrix standard for aqua regia extraction of soils, sludges and biowaste was
prepared by CEN/TC 444. A similar procedure was applied for determination of aqua regia extractable
contents of arsenic, mercury, cadmium, chromium, nickel and lead in fertilizers and liming materials
(standard prepared by CEN/TC 260). CEN/TC 260 also prepared a standard for extraction of a total
micronutrients content in fertilizers using aqua regia. CEN/TC 223 published a standard for a similar
procedure for soil improvers and growing media. Wide use of the aqua regia digestion, availability of the
instruments and the possibility to merge the standards for different matrices in future, were the main
reasons for also applying this method of digestion for plant biostimulants. A simple pre-concentration
procedure is a part of this document to also cover the digestion of liquid samples with low dry matter
content in the case that the measurement method is not sufficiently sensitive. An Annex A describes in
detail the calculation of the initial sample weight to be taken for the pre-concentration step to achieve
concentrations of the individual elements above the limit of quantification.WARNING – Persons using this document should be familiar with usual laboratory practice. This
document does not purport to address all of the safety issues, if any, associated with its use. It is
the responsibility of the user to establish appropriate health and safety practices and to ensure
compliance with any national regulatory conditions.IMPORTANT – It is absolutely essential that tests conducted according to this document are
carried out by suitably trained staff.---------------------- Page: 6 ----------------------
kSIST-TS FprCEN/TS 17701-1:2021
FprCEN/TS 17701-1:2021 (E)
1 Scope
This document specifies the procedure for the digestion of different plant biostimulants with aqua regia
to enable a subsequent determination of arsenic (As), cadmium (Cd), copper (Cu), chromium (Cr),
mercury (Hg), nickel (Ni), lead (Pb) and zinc (Zn). The procedure can be also applied for determination
of other elements. The procedure is applicable for all solid and/or liquid plant biostimulants.
This document is also applicable to the blends of fertilizing products where plant biostimulants are the
main part of the blend. Otherwise, the Technical Specification for the main part of the blend applies.
The extracts are suitable for analysis using CEN/TS 17701-2 (ICP-AES) and CEN/TS 17701-3 (Hg
analysis).NOTE Alternatively, inductivel
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.