ISO/DIS 2100-218

Aerospace elements of electrical and optical connection -- Test methods

Connections électriques et optiques d'éléments aérospatiaux -- Méthodes d'essai

Standards Content (sample)

DRAFT INTERNATIONAL STANDARD
ISO/DIS 2100-218
ISO/TC 20/SC 1 Secretariat: SAC
Voting begins on: Voting terminates on:
2017-07-25 2017-10-16
Aerospace elements of electrical and optical connection —
Test methods —
Part 218:
Ageing of terminal lugs and in-line splices by temperature
and current cycling
Connections électriques et optiques d’éléments aérospatiaux — Méthodes d’essai —

Partie 218: Vieillissement des cosses et des prolongateurs par cyclage en température et en courant

ICS: 49.060
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
This document is circulated as received from the committee secretariat.
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 2100-218:2017(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. ISO 2017
---------------------- Page: 1 ----------------------
ISO/DIS 2100-218:2017(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form

or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior

written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of

the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2017 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/DIS 2100-218:2017(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Preparation of specimens ........................................................................................................................................................................... 1

4 Method ............................................................................................................................................................................................................................ 1

4.1 Severity .......................................................................................................................................................................................................... 1

4.1.1 Crimped terminal lugs and in-line splices on copper cable ........................................................ 1

4.1.2 Crimped terminal lugs and in-line splices on aluminium cable .............................................. 2

5 Method ............................................................................................................................................................................................................................ 2

6 Requirement ............................................................................................................................................................................................................. 2

6.1 Crimped terminal lugs and in-line splices on copper cable ............................................................................. 2

6.2 Crimped terminal lugs and in-line splices on aluminium cable ................................................................... 2

© ISO 2017 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO/DIS 2100-218:2017(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee
...