ISO 13832:2013

Aerospace — Wire, aluminium alloy and copper-clad aluminium conductors — General performance requirements

ISO 13832:2013 specifies the dimensions, electrical characteristics and mechanical characteristics of aluminium-based and copper-clad aluminium (CCA) conductors, for lightweight aircraft electrical cables and aerospace applications. It applies to stranded conductors over the nominal cross-sectional area range 0,22 mm2 to 107 mm2 inclusive. It is not applicable to conductors for conventional copper-based cables, fire-resistant cables or for thermocouple extension cables. Conductors for copper-based cables are specified in ISO 2635, for fire-resistant cables are specified in ISO 1967 and for thermocouple extension cables are specified in ISO 8056 1.

Aéronautique et espace — Conducteurs en alliage d'aluminium chemisé cuivre pour câbles électriques — Exigences générales de performance

General Information

• Status: Published
• Publication Date: 18-Mar-2013
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ISO/TC 20/SC 1 - Aerospace electrical requirements
• Drafting Committee: ISO/TC 20/SC 1/WG 5 - Aircraft electric cables - General requirements
• Current Stage: 9093 - International Standard confirmed
• Completion Date: 20-Feb-2024

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 13832
First edition
2013-03-15
Aerospace — Wire, aluminium alloy and
copper-clad aluminium conductors —
General performance requirements
Aéronautique et espace — Conducteurs en alliage d’aluminium chemisé
cuivre pour câbles électriques — Exigences générales de performance
Reference number
ISO 13832:2013(E)
©
ISO 2013

---------------------- Page: 1 ----------------------
ISO 13832:2013(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 13832:2013(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Characteristics . 2
4.1 General . 2
4.2 Conductor materials . 2
4.3 Material and metal plating for individual strands and code . 2
4.4 Electrical and mechanical characteristics . 2
4.5 Construction of conductors . 3
5 Tests and requirements . 3
5.1 Tensile strength and elongation . 3
5.2 Mass per unit length . 3
5.3 Resistance . 4
5.4 Strand-plating continuity . 4
5.5 Strand-plating adherence . 4
5.6 Strand-plating thickness . 4
6 Packaging and labelling .
...