kSIST FprEN IEC 61326-2-1:2020
(Main)Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications
2018-12-06: CD draft assessment requested
Elektrische Mess-, Steuer-, Regel- und Laborgeräte – EMV-Anforderungen – Teil 2-1: Besondere Anforderungen – Prüfanordnung, Betriebsbedingungen und Leistungsmerkmale für empfindliche Prüf- und Messgeräte für Anwendungen ohne EMV-Schutzmaßnahmen
Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la CEM - Partie 2-1: Exigences particulières - Configurations d'essai, conditions fonctionnelles et critères de performance pour essai de sensibilité et équipement de mesure pour les applications non protégées de la CEM
IEC 61326-2-1:2020 est disponible sous forme de IEC 61326-2-1:2020 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L’IEC 61326:2020 donne des spécifications plus détaillées des configurations d’essai, des conditions fonctionnelles et des critères de performance pour les matériels avec des circuits d’essai et de mesure (internes et/ou externes au matériel) qui n’ont pas de protection CEM pour des raisons opérationnelles et/ou fonctionnelles, comme spécifié par le fabricant. Le fabricant spécifie l’environnement auquel le produit est destiné et sélectionne les spécifications pertinentes du niveau d’essai de l’IEC 61326-1:2020.
Električna oprema za merjenje, kontrolo in laboratorijsko uporabo - Zahteve za elektromagnetno združljivost (EMC) - 2-1. del: Posebne zahteve - Preskusne konfiguracije, obratovalni pogoji in merila učinkovitosti za delovanje EMC nezaščiteno uporabo občutljive preskuševalne in merilne opreme v razmerah brez zaščite proti elektromagnetnim motnjam EMC
General Information
RELATIONS
Standards Content (sample)
SLOVENSKI STANDARD
oSIST prEN IEC 61326-2-1:2019
01-oktober-2019
Električna oprema za merjenje, kontrolo in laboratorijsko uporabo - Zahteve za
elektromagnetno združljivost (EMC) - 2-1. del: Posebne zahteve - Preskusne
konfiguracije, obratovalni pogoji in merila za delovanje občutljive preskuševalne
in merilne opreme v razmerah brez zaščite proti elektromagnetnim motnjam EMCElectrical equipment for measurement, control and laboratory use - EMC requirements -
Part 2-1: Particular requirements - Test configurations, operational conditions and
performance criteria for sensitive test and measurement equipment for EMC unprotected
applicationsElektrische Mess-, Steuer-, Regel- und Laborgeräte – EMV-Anforderungen – Teil 2-1:
Besondere Anforderungen – Prüfanordnung, Betriebsbedingungen undLeistungsmerkmale für empfindliche Prüf- und Messgeräte für Anwendungen ohne EMV-
SchutzmaßnahmenMatériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la
CEM - Partie 2-1: Exigences particulières - Configurations d'essai, conditionsfonctionnelles et critères de performance pour essai de sensibilité et équipement de
mesure pour les applications non protégées de la CEMTa slovenski standard je istoveten z: prEN IEC 61326-2-1:2019
ICS:
19.080 Električno in elektronsko Electrical and electronic
preskušanje testing
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
oSIST prEN IEC 61326-2-1:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------oSIST prEN IEC 61326-2-1:2019
---------------------- Page: 2 ----------------------
oSIST prEN IEC 61326-2-1:2019
65A/923/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61326-2-1 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2019-08-23 2019-11-15
SUPERSEDES DOCUMENTS:
65A/904/CD, 65A/914A/CC
IEC SC 65A : SYSTEM ASPECTS
SECRETARIAT: SECRETARY:
United Kingdom Mr Petar Luzajic
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
TC 77, SC 77A
Other TC/SCs are requested to indicate their interest, if any, in
this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel votingThe attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for Vote
(CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.TITLE:
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-1: Particular
requirements – Test configurations, operational conditions and performance criteria for sensitive test and
measurement equipment for EMC unprotected applicationsPROPOSED STABILITY DATE: 2023
NOTE FROM TC/SC OFFICERS:
Copyright © 2019 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.---------------------- Page: 3 ----------------------
oSIST prEN IEC 61326-2-1:2019
65A/923/CDV – 2 – IEC CDV 61326-2-1 © IEC 2019
1 CONTENTS
2 FOREWORD ........................................................................................................................... 3
3 1 Scope ............................................................................................................................... 5
4 2 Normative references ....................................................................................................... 5
5 3 Terms and definitions ....................................................................................................... 5
6 4 General ............................................................................................................................ 5
7 5 EMC test plan ................................................................................................................... 5
8 5.1 General ................................................................................................................... 5
9 5.2 Configuration of EUT during testing ......................................................................... 6
10 5.3 Operation conditions of EUT during testing .............................................................. 6
11 5.4 Specification of functional performance ................................................................... 7
12 5.5 Test description ....................................................................................................... 7
13 6 Immunity requirements ..................................................................................................... 7
14 6.1 Conditions during the tests ...................................................................................... 7
15 6.2 Immunity test requirements ..................................................................................... 7
16 6.3 Random aspects...................................................................................................... 7
17 6.4 Performance criteria ................................................................................................ 7
18 7 Emission requirements ..................................................................................................... 7
19 8 Test results and test report ............................................................................................... 7
20 9 Instructions for use ........................................................................................................... 7
---------------------- Page: 4 ----------------------oSIST prEN IEC 61326-2-1:2019
IEC CDV 61326-2-1 © IEC 2019 – 3 – 65A/923/CDV
22 INTERNATIONAL ELECTROTECHNICAL COMMISSION
23 ____________
25 ELECTRICAL EQUIPMENT FOR MEASUREMENT,
26 CONTROL AND LABORATORY USE –
27 EMC REQUIREMENTS –
29 Part 2-1: Particular requirements –
30 Test configurations, operational conditions and performance criteria
31 for sensitive test and measurement equipment
32 for EMC unprotected applications
35 FOREWORD
36 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
37 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
38 international co-operation on all questions concerning standardization in the electrical and electronic fields. To
39 this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
40 Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
41 Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
42 in the subject dealt with may participate in this preparatory work. International, governmental and non-
43 governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
44 with the International Organization for Standardization (ISO) in accordance with conditions determined by
45 agreement between the two organizations.46 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
47 consensus of opinion on the relevant subjects since each technical committee has representation from all
48 interested IEC National Committees.49 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
50 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
51 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
52 misinterpretation by any end user.53 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
54 transparently to the maximum extent possible in their national and regional publications. Any divergence
55 between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
56 the latter.57 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
58 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
59 services carried out by independent certification bodies.60 6) All users should ensure that they have the latest edition of this publication.
61 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
62 members of its technical committees and IEC National Committees for any personal injury, property damage or
63 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
64 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
65 Publications.66 8) Attention is drawn to the Normative references
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.