kSIST FprEN IEC 60152:2021
(Main)Identification by hour numbers of the phase conductors of 3-phase electric systems
Identification by hour numbers of the phase conductors of 3-phase electric systems
This document specifies methods and rules for the designation of phase difference between two items in a three-phase AC system. The designations are intended to be applied in the technical documentation of industrial installations, equipment and products, and also on markings of equipment and products.
Kennzeichnung der Phasenleiter in einem elektrischen Dreiphasensystem durch Uhrziffern
Repérage par indices horaires des conducteurs des réseaux triphasés
L'IEC 61052:2021 spécifie les méthodes et les règles en vue de la désignation du déphasage entre deux entités dans un réseau en courant alternatif triphasé. Les désignations sont destinées à figurer dans la documentation technique des installations, matériels et produits industriels, ainsi que sur les marquages des matériels et produits. L'IEC 61052:2021 annule et remplace la 1re édition parue en 1963. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) le titre a été mis à jour en vue de refléter le contenu du nouveau document; b) le concept d'identification des conducteurs par indices horaires a été supprimé, car il est considéré comme dépassé et qu’il existe d'autres moyens d'identification des conducteurs; c) la définition de l’indice horaire (indice d’horloge) et celle du déphasage ont été ajoutées.
Identifikacija vodnikov trifaznih omrežij po urnih indeksih
General Information
Standards Content (sample)
SLOVENSKI STANDARD
oSIST prEN IEC 60152:2021
01-januar-2021
Identifikacija vodnikov trifaznih omrežij po urnih indeksih
Identification by hour numbers of the phase conductors of 3-phase electric systems
Repérage par indices horaires des conducteurs des réseaux triphasésTa slovenski standard je istoveten z: prEN IEC 60152:2020
ICS:
29.020 Elektrotehnika na splošno Electrical engineering in
general
oSIST prEN IEC 60152:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------oSIST prEN IEC 60152:2021
---------------------- Page: 2 ----------------------
oSIST prEN IEC 60152:2021
3/1459/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60152 ED2
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2020-11-06 2021-01-29
SUPERSEDES DOCUMENTS:
3/1446/CD, 3/1458/CC
IEC TC 3 : DOCUMENTATION, GRAPHICAL SYMBOLS AND REPRESENTATIONS OF TECHNICAL INFORMATION
SECRETARIAT: SECRETARY:Sweden Mr Thomas Borglin
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
TC 2,SC 3C,SC 3D,TC 9,TC 14,TC 23,SC
23G,TC 38,TC 61,SC 61B,SC 61C,SC 61D,SC
Other TC/SCs are requested to indicate their interest, if
61H,TC 62
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel votingThe attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.TITLE:
Identification by hour numbers of the phase conductors of 3-phase electric systems
PROPOSED STABILITY DATE: 2030NOTE FROM TC/SC OFFICERS:
This CDV is developed in response to the decision no. 15 of the TC 3 meeting in Shanghai, China,
2019-10-24/25.Copyright © 2020 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.---------------------- Page: 3 ----------------------
oSIST prEN IEC 60152:2021
3/1459/CDV – 2 – IEC CD 60152 IEC:2020
2 CONTENTS
4 FOREWORD ........................................................................................................................... 3
5 1 Scope .............................................................................................................................. 5
6 2 Normative references ...................................................................................................... 5
7 3 Terms and definitions ...................................................................................................... 5
8 4 Hour numbers .................................................................................................................. 5
9 5 Phase difference ............................................................................................................. 6
11 Figure 1 – Illustration of hour number for three-phase transformer Dy11 ................................. 6
12 Figure 2 – Examples of hour numbers representing phase differences .................................... 6
---------------------- Page: 4 ----------------------oSIST prEN IEC 60152:2021
IEC CD 60152 IEC:2020 – 3 – 3/1459/CDV
18 INTERNATIONAL ELECTROTECHNICAL COMMISSION
19 ____________
21 DESIGNATION OF PHASE DIFFERENCES BY HOUR NUMBERS IN
22 THREE-PHASE AC SYSTEMS
25 FOREWORD
26 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
27 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
28 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
29 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
30 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
31 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
32 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
33 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
34 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
35 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
36 consensus of opinion on the relevant subjects since each technical committee has representation from all
37 interested IEC National Committees.38 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
39 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
40 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
41 misinterpretation by any end user.42 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
43 transparently to the maximum extent possible in their national and regional publications. Any divergence between
44 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
45 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
46 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
47 services carried out by independent certification bodies.48 6) All users should ensure that they have the latest edition of this publication.
49 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
50 members of its technical committees and IEC National Committees for any personal injury, property damage or
51 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
52 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
53 Publications.54 8) Attention is drawn to the Normative references cited in this publication. Use of the referen
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.