Generic specification of information on products by properties - Part 1: Principles and methods (IEC 62569-1:2017)

The IEC 62569 series defines principles and methods for the specification of objects by object
properties, for example in data sheets, by utilizing predefined and internationally standardized
(dictionary) properties residing in the data dictionary of IEC 61360.
The IEC 62569 series is being developed to transfer the former paper-based applications of
blank detail specifications or product descriptions towards supporting electronic business
allowing the evaluation and management of described items by computers.
This part of IEC 62569 specifies several qualifiers to be used with object or (dictionary)
properties and their values indicating life cycle and other aspects of the property. It is a
prerequisite for the usage of the other parts of IEC 62569.

Allgemeine Regeln zur Erstellung von Produktspezifikationen - Teil 1: Grundsätze und Methoden (IEC 62569-1:2017)

Spécification générique relative aux informations sur les produits données par les propriétés - Partie 1: Principes et méthodes (IEC 62569-1:2017)

L'IEC 62569-1:2017 spécifie plusieurs qualificatifs à utiliser avec les propriétés d'objet ou (dictionnaire) et leurs valeurs indiquant le cycle de vie et d'autres aspects de la propriété . C'est une condition préalable à l'utilisation des autres parties de l'IEC 62569. Cette première édition annule et remplace l’IEC PAS 62569-1:2009. Cette édition constitue une révision technique.

Osnovne specifikacije informacij o izdelkih z lastnostmi - 1. del: Načela in metode (IEC 62569-1:2017)

Skupina standardov IEC 62569 določa načela in metode za specifikacijo objektov glede na njihove lastnosti, na primer v obliki podatkovnih listov, na podlagi vnaprej določenih in mednarodno standardiziranih (slovarskih) lastnosti, opredeljenih v podatkovnem slovarju standarda IEC 61360.
V pripravi je skupina standardov IEC 62569 za prenos starejših specifikacij z manj podrobnostmi ali opise proizvodov za namene zagotavljanja podpore za elektronsko poslovanje ter računalniško vrednotenje in upravljanje opisanih elementov.
Ta del standarda IEC 62569 določa več kvalifikatorjev za uporabo z objektom ali (slovarskimi) lastnostmi in njihovimi vrednostmi, ki označujejo življenjski cikel in druge vidike lastnine. To je predpogoj za uporabo drugih delov standarda IEC 62569.

General Information

Status
Published
Publication Date
03-Jan-2018
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
07-Nov-2017
Due Date
12-Jan-2018
Completion Date
04-Jan-2018

Buy Standard

Standard
SIST EN 62569-1:2018 - BARVE na PDF-str 14,15,23,24,28
English language
39 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 62569-1:2018
01-februar-2018

2VQRYQHVSHFLILNDFLMHLQIRUPDFLMRL]GHONLK]ODVWQRVWPLGHO1DþHODLQPHWRGH

,(&

Generic specification of information on products by properties - Part 1: Principles and

methods (IEC 62569-1:2017)

Allgemeine Regeln zur Erstellung von Produktspezifikationen - Teil 1: Grundsätze und

Methoden (IEC 62569-1:2017)

Spécification générique relative aux informations sur les produits données par les

propriétés - Partie 1: Principes et méthodes (IEC 62569-1:2017)
Ta slovenski standard je istoveten z: EN 62569-1:2017
ICS:
01.110 7HKQLþQDGRNXPHQWDFLMD]D Technical product
L]GHONH documentation
29.020 Elektrotehnika na splošno Electrical engineering in
general
SIST EN 62569-1:2018 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 62569-1:2018
---------------------- Page: 2 ----------------------
SIST EN 62569-1:2018
EUROPEAN STANDARD EN 62569-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2017
ICS 01.110; 29.020
English Version
Generic specification of information on products by properties -
Part 1: Principles and method
(IEC 62569-1:2017)

Spécification générique relative aux informations sur les Allgemeine Regeln zur Erstellung von

produits données par les propriétés - Partie 1: Principes et Produktspezifikationen - Teil 1: Grundsätze und Methoden

méthodes (IEC 62569-1:2017)
(IEC 62569-1:2017)

This European Standard was approved by CENELEC on 2017-08-16. CENELEC members are bound to comply with the CEN/CENELEC

Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC

Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the

same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,

Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,

Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Ref. No. EN 62569-1:2017 E
---------------------- Page: 3 ----------------------
SIST EN 62569-1:2018
EN 62569-1:2017
European foreword

The text of document 3/1310/FDIS, future edition 1 of IEC 62569-1, prepared by IEC/TC 3

"Information structures and elements, identification and marking principles, documentation and

graphical symbols" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as

EN 62569-1:2017.
The following dates are fixed:
(dop) 2018-05-16
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2020-08-16
• latest date by which the national standards conflicting with
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice

The text of the International Standard IEC 62569-1:2017 was approved by CENELEC as a European

Standard without any modification.

In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60027 (series) NOTE Harmonized as EN 60027 (series).
IEC 61360-6:2016 NOTE Harmonized as EN 61360-6:2017.
IEC 61987-10:2009 NOTE Harmonized as EN 61987-10:2009.
IEC 62264 (series) NOTE Harmonized as EN 62264 (series).
IEC 81346-1 NOTE Harmonized as EN 81346-1.
IEC 82079-1:2012 NOTE Harmonized as EN 82079-1:2012.
IEC 80000 (series) NOTE Harmonized as EN 80000 (series).
ISO 80000 (series) NOTE Harmonized as EN ISO 80000 (series).
ISO 14040:2006 NOTE Harmonized as EN ISO 14040:2006.
---------------------- Page: 4 ----------------------
SIST EN 62569-1:2018
EN 62569-1:2017
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments)

applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant

EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:

www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61360-1 - Standard data element types with FprEN 61360-1 -
associated classification scheme - Part 1:
Definitions - Principles and methods
IEC/TS 62720 - Identification of units of measurement for - -
computer-based processing
---------------------- Page: 5 ----------------------
SIST EN 62569-1:2018
---------------------- Page: 6 ----------------------
SIST EN 62569-1:2018
IEC 62569-1
Edition 1.0 2017-07
INTERNATIONAL
STANDARD
colour
inside
HORIZONTAL STANDARD
Generic specification of information on products by properties –
Part 1: Principles and methods
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 01.110 ; 29.020 ISBN 978-2-8322-4428-9

Warning! Make sure that you obtained this publication from an authorized distributor.

® Registered trademark of the International Electrotechnical Commission
---------------------- Page: 7 ----------------------
SIST EN 62569-1:2018
– 2 – IEC 62569-1:2017 © IEC 2017
CONTENTS

FOREWORD ........................................................................................................................... 4

INTRODUCTION ..................................................................................................................... 6

1 Scope ............................................................................................................................ 10

2 Normative references .................................................................................................... 10

3 Terms, definitions and abbreviated terms ...................................................................... 10

3.1 Terms and definitions ............................................................................................ 10

3.2 Abbreviated terms ................................................................................................. 15

4 Specifications ................................................................................................................ 15

5 Properties ...................................................................................................................... 16

5.1 Object properties versus dictionary properties....................................................... 16

5.2 Sets of properties for specific purposes ................................................................ 18

5.3 Properties of components ..................................................................................... 18

6 Property qualifiers ......................................................................................................... 19

6.1 General ................................................................................................................. 19

6.2 Life cycle qualifier ................................................................................................. 20

6.2.1 General ......................................................................................................... 20

6.2.2 SPE ............................................................................................................... 20

6.2.3 INQ ................................................................................................................ 20

6.2.4 OFF ............................................................................................................... 21

6.2.5 CON .............................................................................................................. 21

6.2.6 SUP ............................................................................................................... 21

6.2.7 BUILT ............................................................................................................ 21

6.2.8 OP ................................................................................................................. 21

6.2.9 DECOM ......................................................................................................... 21

6.2.10 Example of the use of the life cycle qualifier .................................................. 21

6.2.11 Example of the use of life cycle qualifier associated with a single

property within a transaction applying the XML notation ................................. 22

6.3 Applicability qualifier ............................................................................................. 22

6.3.1 General ......................................................................................................... 22

6.3.2 AVP ............................................................................................................... 23

6.3.3 AVN ............................................................................................................... 23

6.3.4 AVA ............................................................................................................... 23

6.3.5 NA ................................................................................................................. 23

6.3.6 Application example – Method A (implicit marking) ........................................ 23

6.3.7 Application example – Method B (explicit marking) ........................................ 24

6.4 Value origin qualifier ............................................................................................. 24

6.4.1 General ......................................................................................................... 24

6.4.2 EST ............................................................................................................... 25

6.4.3 CAL ............................................................................................................... 25

6.4.4 MEA .............................................................................................................. 25

6.4.5 SET ............................................................................................................... 25

6.4.6 Example of the use of the value origin qualifier .............................................. 25

6.5 Value processing qualifier ..................................................................................... 25

6.5.1 General ......................................................................................................... 25

6.5.2 ARITHM ......................................................................................................... 26

6.5.3 MED .............................................................................................................. 26

---------------------- Page: 8 ----------------------
SIST EN 62569-1:2018
IEC 62569-1:2017 © IEC 2017 – 3 –

6.5.4 MOD .............................................................................................................. 26

6.5.5 WARITHM ..................................................................................................... 27

6.5.6 GEOM ........................................................................................................... 27

6.5.7 WGEOM ........................................................................................................ 27

6.5.8 HARM ............................................................................................................ 28

6.5.9 RMS .............................................................................................................. 28

6.6 Multiple qualifiers .................................................................................................. 28

6.7 When to use a qualifier ......................................................................................... 28

6.8 Example of the use of multiple qualifiers associated with a single property
within a transaction applying, for example, the XML notation based on the

example shown in 6.6 ........................................................................................... 29

7 Property values ............................................................................................................. 29

7.1 General ................................................................................................................. 29

7.2 How to deal with special values ............................................................................ 29

7.3 How to use the level type concept ......................................................................... 30

7.4 Availability of values associated with (dictionary) properties ................................. 30

7.5 Application of unit systems ................................................................................... 30

7.6 Use of units in software applications ..................................................................... 30

8 Data reliability and quality ............................................................................................. 31

8.1 General ................................................................................................................. 31

8.2 Description of inaccuracies of quantitative values ................................................. 31

8.3 Intended design tolerances on products ................................................................ 32

Annex A (normative) (Dictionary) property definitions ........................................................... 33

A.1 General ................................................................................................................. 33

A.2 Source definitions of (dictionary) properties and classes of (dictionary)

properties in this document ................................................................................... 33

A.2.1 Definitions of class of (dictionary) properties ................................................. 33

A.2.2 Definition of (dictionary) properties to class AAB001: ..................................... 34

Bibliography .......................................................................................................................... 36

Figure 1 – Context of generic specification for information on products ................................... 8

Figure 2 – Business scenario between parties ........................................................................ 9

Figure 3 – Import and export possibilities using tagged formats .............................................. 9

Figure 4 – Relation between the properties of a product type and the (dictionary)

properties of a data dictionary used for their expression ....................................................... 17

Figure 5 – Inclusion of sets of properties .............................................................................. 18

Figure 6 – Relation between the components of a product type and the product type

used for their implementation ................................................................................................ 19

Figure 7 – Development of life cycle qualifier over time......................................................... 22

Table 1 – Example of the use of the life cycle qualifier .......................................................... 21

Table 2 – Example of the use of the value origin qualifier ..................................................... 25

Table 3 – Example of the use of multiple qualifiers ............................................................... 28

Table 4 – Tolerance concept ................................................................................................. 32

---------------------- Page: 9 ----------------------
SIST EN 62569-1:2018
– 4 – IEC 62569-1:2017 © IEC 2017
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
GENERIC SPECIFICATION OF INFORMATION
ON PRODUCTS BY PROPERTIES –
Part 1: Principles and methods
FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of IEC is to promote

international co-operation on all questions concerning standardization in the electrical and electronic fields. To

this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,

Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC

Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested

in the subject dealt with may participate in this preparatory work. International, governmental and non-

governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely

with the International Organization for Standardization (ISO) in accordance with conditions determined by

agreement between the two organizations.

2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

consensus of opinion on the relevant subjects since each technical committee has representation from all

interested IEC National Committees.

3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

misinterpretation by any end user.

4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

transparently to the maximum extent possible in their national and regional publications. Any divergence

between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in

the latter.

5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity

assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any

services carried out by independent certification bodies.

6) All users should ensure that they have the latest edition of this publication.

7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

members of its technical committees and IEC National Committees for any personal injury, property damage or

other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and

expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC

Publications.

8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is

indispensable for the correct application of this publication.

9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of

patent rights. IEC shall not be held responsible for identifying any or all such patent rights.

International Standard IEC 62569-1 has been prepared by IEC technical committee 3:

Information structures and elements, identification and marking principles, documentation and

graphical symbols.

This first edition cancels and replaces IEC PAS 62569-1:2009. This edition constitutes a

technical revision.
The text of this International Standard is based on the following documents:
FDIS Report on voting
3/1310/FDIS 3/1314/RVD

Full information on the voting for the approval of this International Standard can be found in

the report on voting indicated in the above table.
---------------------- Page: 10 ----------------------
SIST EN 62569-1:2018
IEC 62569-1:2017 © IEC 2017 – 5 –

This document has been drafted in accordance with the ISO/IEC Directives, Part 2.

Terms which are defined in Clause 3 are italicized when they occur in definitions of other

terms in Clause 3.

A list of all parts in the IEC 62569 series, published under the general title Generic

specification of information on products by properties, can be found on the IEC website.

The committee has decided that the contents of this document will remain unchanged until the

stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to

the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates

that it contains colours which are considered to be useful for the correct

understanding of its contents. Users should therefore print this document using a

colour printer.
---------------------- Page: 11 ----------------------
SIST EN 62569-1:2018
– 6 – IEC 62569-1:2017 © IEC 2017
INTRODUCTION

This document establishes general principles and methods required for all parts of IEC 62569,

to manage the product-related information as described in the following parts along the life

cycle of an object, e.g. a product during its operational use.

IEC 62569-2 provides a generally applicable structure of a generic specification of information

on products presenting those common clauses which are independent of any specific

equipment, component and device. It serves as a guide for the preparation of technical

specifications for various objects. Due to its generic type, particular issues referring to

specific product groups are excluded. These need to be obtained from the specific product

descriptions within product standards.

IEC 62569-3 provides a collection of generally applicable object properties used in

conjunction with the predefined structure in IEC 62569-2, being the basis for, for example, an

XML-based electronic template, serving as generic template for the development of product-

specific specifications of information by product committees within IEC and ISO, industrial

consortia or other industrial organizations.

Figure 1 provides an overview of the intention of this standard. The generic specification for

information of objects represents an overall approach for those mainly technical information

issues which are generally required by users of an object, and being independent of any

specific product class, such as identification, classification or accessibility information for

logical or physical interconnection to other products. It provides sets of object properties

which may contain quantitative, non-quantitative or conditional types, containing predefined

value sets for the non-quantitative, or units for the quantitative types.

The next step is the application of the available generic information on a specific product

class such as motor, transformer or resistor. In this step the previously available generic

information is aggregated by additional information focusing on that information which is

typically applicable for the considered specific class. The result is applicable only for that

considered class, and named product-class-specific blank detail specification. For each

further class, such a step is repeated. The object properties contained in a blank detail

specification for a specific product class are either of the quantitative or non-quantitative type

and also foreseen with predefined value sets for the non-quantitative, or units for the

quantitative types.

These blank detail specifications should be made available (e.g. as a web-based collection),

allowing users to establish the detail specifications (instantiate or populate with data) for

automated and controlled use by industry in the business process.

The next step is the application of blank detail specifications in daily practice in industry,

when a user populates the object properties of the blank detail specification with required

values for his specific application. Depending on the needs, further object properties may be

added, marked as not applicable or complemented by qualifiers, etc.

The result may be used, for example, as a functional specification for a specific object within

a system or plant, or used for an inquiry.

From this perspective it is easy to deduce that a prerequisite for an economic implementation

of the above specifications is the existence of an internationally available data dictionary with

public access, providing internationally standardized collections of (dictionary) properties

following common methods as defined in the IEC 61360 series.

Referring from object descriptions to previously defined standardized semantic (dictionary)

property descriptions is the key issue of an effective, reliable and secure electronic business.

For the relations among (dictionary) properties, the associated data dictionary and the

different specifications, see Figure 1.
---------------------- Page: 12 ----------------------
SIST EN 62569-1:2018
IEC 62569-1:2017 © IEC 2017 – 7 –
Within this document two main concepts are differentiated:
A. a specification concept for “real or abstract” objects;

B. a data dictionary containing predefined information elements, each described by a

rigorous set of attributes and unambiguously identified, so that its information elements

can be used as a reference when preparing the concept A. Such a data dictionary is an

optional tool to make the descriptions for concept A. It is of course a “real world” object

but a quite different one and separated from the “real world” intended to be described.

For concept A, the term object property and set of object properties will be applied. For issues

relating to concept B, the term (dictionary) property and set of (dictionary) properties will be

applied to indicate that here a property or set of properties residing in a data dictionary is

meant.

The purpose of this document is to describe how real world specifications or descriptions are

to be prepared by making use of the data dictionary defined in IEC 61360.

The IEC 62569 series is a companion standard providing methods of expanding the use of

existing standardized (dictionary) properties as provided in the IEC CDD (Common Data

Dictionary) along the life cycle periods without the need to define additional (dictionary)

properties or to redefine such supporting economic engineering and data management.

NOTE 1 As the referred data dictionary of IEC 61360 is quite different from a dictionary, the term "data dictionary"

is consistently used within this document.

NOTE 2 Such a data dictionary is available as a data base application to be found under

http://std.iec.ch/iec61360 [retrieved 2016-05-03].
---------------------- Page: 13 ----------------------
SIST EN 62569-1:2018
– 8 – IEC 62569-1:2017 © IEC 2017
contained in
contained in
IEC 61360
Data
Dictionary (Dictionary)
Qualifier
Properties
refers to
refers to
Generic specification
for information on
products
refers to
refers to
is based on
refers to
refers to
Product-class-specific
Blank Detail
Specification *
is based on
Product-specific
Detail Specification
e.g. power transformer **
* Developed by Product ** Filled with product specific data at a
Committees, Consortia or specified time in the life cycle process of a
other Organizations, e.g. for power transformer; used in a defined
lifting cranes, capacitors, business scenario among industrial
resistors, power transformers partners, e.g. seller,buyer
IEC
Figure 1 – Context of generic specification for information on products
Usage view of a specific
Specific view of a Generic view independent Basic methods and
product in business scenarios
product class of any product principles
among partners
---------------------- Page: 14 ----------------------
SIST EN 62569-1:2018
IEC 62569-1:2017 © IEC 2017 – 9 –

Figure 2 shows a business scenario about the usage of a detail specification (based on the

generic specification) for information on products between business parties.
IEC
Figure 2 – Business scenario between parties
If a specification for information in the form of an electronic template is asso
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.