SIST EN IEC 60598-1:2021/oprAA:2021
(Amendment)Luminaires - Part 1: General requirements and tests
Luminaires - Part 1: General requirements and tests
This Part 1 of IEC 60598 specifies general requirements for luminaires, incorporating electric light sources for operation from supply voltages up to 1 000 V. The requirements and related tests of this document cover: classification, marking, mechanical construction, electrical construction and photobiological safety.
Leuchten - Teil 1: Allgemeine Anforderungen und Prüfungen
Luminaires - Partie 1: Exigences générales et essais
Svetilke - 1. del: Splošne zahteve in preskusi - Dopolnilo AA
General Information
RELATIONS
Standards Content (sample)
SLOVENSKI STANDARD
SIST EN IEC 60598-1:2021/oprAA:2021
01-junij-2021
Svetilke - 1. del: Splošne zahteve in preskusi - Dopolnilo AA
Luminaires - Part 1: General requirements and tests
Leuchten - Teil 1: Allgemeine Anforderungen und Prüfungen
Luminaires - Partie 1: Exigences générales et essais
Ta slovenski standard je istoveten z: EN IEC 60598-1:2021/prAA
ICS:
29.140.40 Svetila Luminaires
SIST EN IEC 60598-1:2021/oprAA:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------SIST EN IEC 60598-1:2021/oprAA:2021
---------------------- Page: 2 ----------------------
SIST EN IEC 60598-1:2021/oprAA:2021
EUROPEAN STANDARD DRAFT
EN IEC 60598-1:2021
NORME EUROPÉENNE
EUROPÄISCHE NORM
prAA
April 2021
ICS
English Version
Luminaires - Part 1: General requirements and tests
Luminaires - Partie 1: Exigences générales et essais Leuchten - Teil 1: Allgemeine Anforderungen und
PrüfungenThis draft amendment prAA, if approved, will modify the European Standard EN IEC 60598-1:2021; it is submitted to CENELEC members
for enquiry.Deadline for CENELEC: 2021-07-16.
It has been drawn up by CLC/TC 34.
If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 73092 Ref. No. EN IEC 60598-1:2021/prAA E---------------------- Page: 3 ----------------------
SIST EN IEC 60598-1:2021/oprAA:2021
EN IEC 60598-1:2021/prAA:2021 (E)
1 Contents Page
2 European foreword ................................................................................................................................. 3
3 1 Modification to the “Endorsement notice” .................................................................................... 4
4 2 Modification to “SECTION 3: MARKING” ....................................................................................... 4
5 3 Modification to “SECTION 4: CONSTRUCTION” ........................................................................... 4
6 4 Modification to “SECTION 5: EXTERNAL AND INTERNAL WIRING” .......................................... 4
7 5 Modification to SECTION 12: ENDURANCE TEST AND THERMAL TEST .................................. 5
8 6 Addition of Annex ZB, “Special national conditions” and Annex ZC, “A-deviations” ............. 5
9 7 Modification of the Bibliography .................................................................................................... 8
---------------------- Page: 4 ----------------------SIST EN IEC 60598-1:2021/oprAA:2021
EN IEC 60598-1:2021/prAA:2021 (E)
11 European foreword
12 This document (EN IEC 60598-1:2021/prAA:2021) has been prepared by CLC/TC 34 ”Lighting”.
13 This document is currently submitted to the Enquiry.14 The following dates are proposed:
• latest date by which the existence of this (doa) dor + 6 months
document has to be announced at national
level
• latest date by which this document has to be (dop) dor + 12 months
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) dor + 36 months
conflicting with this document have to be (to be confirmed or
withdrawn modified when voting)
15 This document will amend EN IEC 60598-1:2021.
16 This amendment was developed to introduce common modifications and special national conditions in
17 EN IEC 60598-1:2021.18 This document has been prepared under a mandate given to CENELEC by the European Commission
19 and the European Free Trade Association, and supports essential requirements of EU Directive(s).
20 For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of
21 EN IEC 60598-1:2021.---------------------- Page: 5 ----------------------
SIST EN IEC 60598-1:2021/oprAA:2021
EN IEC 60598-1:2021/prAA:2021 (E)
22 1 Modification to the “Endorsement notice”
23 Replace the last two lines with the following:
24 “The text of the International Standard IEC 60598-1:2020 was approved by CENELEC as a European
25 Standard with agreed common modifications.”26 2 Modification to “SECTION 3: MARKING”
27 In 3.2.12, delete NOTE 4.
28 3 Modification to “SECTION 4: CONSTRUCTION”
29 In 4.11.6, at the end of the paragraph commencing “Following completion of these tests...”, add the
30 following text:31 “the test voltage however being reduced to 1 500 V”.
32 4 Modification to “SECTION 5: EXTERNAL AND INTERNAL WIRING”
33 In 5.2.2, paragraph 1, replace “IEC 60227 (all parts) and IEC 60245 (all parts)”, by “EN 50525 (all
34 parts)”, and delete paragraph 2.35 Replace Table 5.1 by the following new table:
36 “
37 Table 5.1 — Supply cord
Luminaire Rubber PVC No insulation
Ordinary class I luminaires c c
H03RT-H H03VVH2-F
H03VV-F
Ordinary class II luminaires c c
H05RR-F H03VVH2-F
H03VV-F
Luminaires other than ordinary class I c a c
H05RN-F H03VVH2-F
and II
a c
H03VV-F
Portable rough service luminaires c
H07RN-F
Class III or with SELV or PELV circuits Uninsulated
luminaires b
conductor
AC: U ≤ 25 V
DC: U ≤ 60V
Interrupted DC voltage for frequencies
between 10 Hz and
200 Hz: ≤ 25 V peak
Class III or with SELV or PELV circuits Unsheathed basic insulated
luminaires conductor
AC: 25 V < U ≤ 50 V
DC: 60 V < U ≤ 120 V
---------------------- Page: 6 ----------------------
SIST EN IEC 60598-1:2021/oprAA:2021
EN IEC 60598-1:2021/prAA:2021 (E)
Luminaire Rubber PVC
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.