23.100.99 - Other fluid power system components
Other fluid power system components
Weitere Hydrauliksystemkomponenten
Autres éléments pour transmissions hydrauliques et pneumatiques
Drugi sestavni deli hidravličnih sistemov
General Information
This document specifies two methods of measuring the level of acoustic pressure at the outlet of an exhaust silencer: — the first method, called "steady-state mode", is intended to evaluate the noise level under steady state flow, i.e. constant upstream pressure (steady-state test according to ISO 6358‑1); and — the second method, called "discharge", is intended to measure the noise level during the decrease of the pneumatic pressure (discharge test according to ISO 6358‑2). This document is app...view more
- Standard22 pagesFrench language
sale 15% off- Standard21 pagesEnglish language
sale 15% off
This document specifies the types and selection of hydraulic ports of gas-loaded accumulators with separator, which are used in hydraulic fluid power systems.
- Technical report8 pagesFrench language
sale 15% off- Technical report8 pagesEnglish language
sale 15% off
This document specifies tests, procedures and a method of presenting the results concerning the parameters that define the main characteristics to be included in the supplier's literature of lubricators conforming to ISO 6301‑1. This document can be applied: — to facilitate the comparison of lubricators by standardizing test methods and presentation of test data; — to assist in the proper application of lubricators in compressed-air systems. The tests specified are intended to allow comparison b...view more
- Standard7 pagesFrench language
sale 15% off- Standard6 pagesEnglish language
sale 15% off
ISO 6301-1 specifies which characteristics of compressed-air lubricators are to be included in the supplier's literature. It also specifies product-marking requirements for lubricators. ISO 6301-1 is applicable to compressed-air lubricators constructed from light alloys (e.g. aluminium), zinc die-cast alloys, brass, steel and plastic, with a maximum rated pressure of 1 600 kPa (16 bar ) or less and a maximum rated temperature of 80 °C or less.
- Standard8 pagesFrench language
sale 15% off- Standard8 pagesEnglish language
sale 15% off
1.1 This European Standard specifies the requirements for materials, design, manufacture, testing inspection, safety systems and documentation (including instructions for first operation), for commonly-used types of gas-loaded accumulators and gas bottles for fluid power applications (see 1.2). 1.2 This European Standard applies to the following types of components, defined as the pressure-containing envelope of gas-loaded accumulators: - bladder type; - diaphragm type; - piston type; - transfer...view more
- Standard98 pagesEnglish language
sale 10% off- e-Library read for1 day
1.1 This European Standard specifies the requirements for materials, design, manufacture, testing inspection, safety equipment configuration and documentation (including instructions for first operation), for commonly-used types of gas-loaded accumulators and pressure vessels used to provide additional gas capacity for fluid power applications (see 1.2).
1.2 This European Standard applies to the following types of components, defined as the pressure-containing envelope of gas-loaded accumulator...view more
- Standard98 pagesEnglish language
sale 10% off- e-Library read for1 day
This part of ISO 10771 specifies a method of fatigue testing the pressure-containing envelopes of
components used in hydraulic fluid power systems under sustained steady cyclic internal pressure loads.
This part of ISO 10771 is only applicable to component pressure-containing envelopes that
— are manufactured from metals,
— are operated at temperatures that exclude creep and low-temperature embrittlement,
— are only subjected to pressure-induced stresses,
— are not subjected to loss of str...view more
- Standard14 pagesEnglish language
sale 15% off- Standard19 pagesEnglish language
sale 10% off- e-Library read for1 day
ISO 10771-1:2015 specifies a method of fatigue testing the pressure-containing envelopes of components used in hydraulic fluid power systems under sustained steady cyclic internal pressure loads. This part of ISO 10771 is only applicable to component pressure-containing envelopes that - are manufactured from metals, - are operated at temperatures that exclude creep and low-temperature embrittlement, - are only subjected to pressure-induced stresses, - are not subjected to loss of strength due to...view more
- Standard14 pagesEnglish language
sale 15% off- Standard19 pagesEnglish language
sale 10% off- e-Library read for1 day
Cancels and replaces the second edition (1985). Specifies the following characteristics and requirements for a general purpose three-pin electrical plug connector with earth contact for use with a single solenoid: the electrical characteristics of the connector; the dimensions of the pins and earth contact; the means for fixing the socket to the plug; the sealing procedure between the plug and the socket; usage requirements. The electrical plug connector specified herein is intended to be used u...view more
- Standard4 pagesEnglish language
sale 15% off- Standard4 pagesFrench language
sale 15% off- Standard4 pagesFrench language
sale 15% off- Standard4 pagesEnglish language
sale 10% off- e-Library read for1 day
ISO/TR 10771-2:2008 specifies a test method for fatigue rating of the pressure-containing envelopes of components used in hydraulic fluid power systems, as tested under steady internal cyclic pressure loads in accordance with ISO 10771-1.
- Technical report40 pagesEnglish language
sale 15% off
This International Standard specifies the following characteristics and requirements for a general-purpose,
electrical-plug connector with two or three contacts plus earth, for use with solenoids:
_ the electrical characteristics of the connector;
_ the dimensions of the contacts;
_ the means of fixing the plug to the socket;
_ the sealing procedure between the plug and the socket;
_ usage requirements.
The electrical-plug connector specified in this International Standard is intended to ...view more
- Standard6 pagesEnglish language
sale 15% off- Standard6 pagesFrench language
sale 15% off- Standard6 pagesEnglish language
sale 10% off- e-Library read for1 day
This International Standard specifies the following characteristics and requirements for a general-purpose, electrical-plug connector with two or three contacts plus earth, for use with solenoids: _ the electrical characteristics of the connector; _ the dimensions of the contacts; _ the means of fixing the plug to the socket; _ the sealing procedure between the plug and the socket; _ usage requirements. The electrical-plug connector specified in this International Standard is intended to be used...view more
- Standard6 pagesEnglish language
sale 15% off- Standard6 pagesFrench language
sale 15% off- Standard6 pagesEnglish language
sale 10% off- e-Library read for1 day
- Standard4 pagesFrench language
sale 15% off- Standard4 pagesEnglish language
sale 15% off- Standard4 pagesEnglish language
sale 10% off- e-Library read for1 day
Cancels and replaces the first edition (1989). Specifies the following characteristics and requirements for a general purpose two-pin electrical plug connector with earth contact for use with a single solenoid: the electrical characteristics of the connector; the dimensions of the pins and earth contact; the means for fixing the socket to the plug; the sealing procedure between the plug and the socket; usage requirements. The electrical plug connector specified herein is intended to be used unde...view more
- Standard5 pagesEnglish language
sale 15% off- Standard5 pagesFrench language
sale 15% off- Standard5 pagesFrench language
sale 15% off- Standard5 pagesEnglish language
sale 10% off- e-Library read for1 day
Specifies a method, and establishes a means for ensuring that the accuracy of particulate contamination analyses in hydraulic systems is not degraded by a lack of sample container cleanliness. Gives definitions and tabulates the inspection ratios together with the AQQL values of concern.
- Standard2 pagesFrench language
sale 15% off- Standard2 pagesFrench language
sale 15% off- Standard2 pagesEnglish language
sale 15% off- Standard2 pagesEnglish language
sale 10% off- e-Library read for1 day
Cancels and replaces the second edition (1985). Specifies the following characteristics and requirements for a general purpose three-pin electrical plug connector with earth contact for use with a single solenoid: the electrical characteristics of the connector; the dimensions of the pins and earth contact; the means for fixing the socket to the plug; the sealing procedure between the plug and the socket; usage requirements. The electrical plug connector specified herein is intended to be used u...view more
- Standard4 pagesEnglish language
sale 15% off- Standard4 pagesFrench language
sale 15% off- Standard4 pagesFrench language
sale 15% off- Standard4 pagesEnglish language
sale 10% off- e-Library read for1 day
Cancels and replaces the first edition (1989). Specifies the following characteristics and requirements for a general purpose two-pin electrical plug connector with earth contact for use with a single solenoid: the electrical characteristics of the connector; the dimensions of the pins and earth contact; the means for fixing the socket to the plug; the sealing procedure between the plug and the socket; usage requirements. The electrical plug connector specified herein is intended to be used unde...view more
- Standard5 pagesEnglish language
sale 15% off- Standard5 pagesFrench language
sale 15% off- Standard5 pagesFrench language
sale 15% off- Standard5 pagesEnglish language
sale 10% off- e-Library read for1 day
Specifies methods for measuring sealing devices having more than one seal in the set. Specifies methods for measuring stack height in order to determine that the sets are to an acceptable dimensional standard. Does not specify the dimensions for packing sets or their components. Describes three acceptable methods, and figure 1 shows a typical measuring device for the methods 1 and 2, the figures 3 and 4 show a typical setup for the methods 2 and 3, and figure 2 shows a typical device for the met...view more
- Standard4 pagesEnglish language
sale 15% off- Standard4 pagesFrench language
sale 15% off- Standard4 pagesFrench language
sale 15% off- Standard4 pagesEnglish language
sale 10% off- e-Library read for1 day
Specifies a method, and establishes a means for ensuring that the accuracy of particulate contamination analyses in hydraulic systems is not degraded by a lack of sample container cleanliness. Gives definitions and tabulates the inspection ratios together with the AQQL values of concern.
- Standard2 pagesFrench language
sale 15% off- Standard2 pagesFrench language
sale 15% off- Standard2 pagesEnglish language
sale 15% off- Standard2 pagesEnglish language
sale 10% off- e-Library read for1 day
This European Standard specifies the requirements for materials, design, manufacture, testing inspection, safety systems and documentation (including instructions for first operation), for commonly-used types of gas-loaded accumulators and gas bottles for fluid power applications (see 1.2).
1.2 This European Standard applies to the following types of components, defined as the pressure-containing envelope of gas-loaded accumulators:
- bladder type;
- diaphragm type;
- piston type;
- transfe...view more
- Amendment12 pagesEnglish language
sale 10% off- e-Library read for1 day