25.060.20 - Dividing and tool-workpiece holding devices

This document specifies dimensions for polygonal taper interfaces with flange contact surface — polygon shanks for automatic and manual tool exchange to be applied on machine tools (e. g. turning machines, drilling machines, milling machines and turn/milling centres as well as grinding machines). A range of shank sizes is specified. These shanks incorporate a grooved flange to enable automatic tool exchange. The clamping can be realized by a circular groove using clamping segments or internal sc...view more

ISO 26622-1:2017 specifies the dimensions for modular taper interface with ball track system: tapered shanks for automatic and manual tool exchange to be applied on machine tools (e.g. lathe machines, drilling machines, milling machines and turn/milling machine centres). A range of shank sizes is specified and details of the coolant-sealing O-ring are specified in Annex A. The shank incorporates a flange with a groove to enable automatic tool exchange. The tools can also be exchanged manually. T...view more

ISO 238:2016 specifies the dimensions of the following two pieces of equipment: a) reduction sleeves for tools with Morse taper shanks; b) extension sockets for tools with Morse taper shanks. It comprises, for each of them, two tables giving the dimensions in millimetres and the corresponding dimensions in inches, respectively.

ISO 4207:2016 specifies the dimensions of counterbores with Morse taper shanks and detachable pilots for general use.

ISO 4202:2016 specifies the dimensions of reduction sleeves with external 7/24 taper (Nos. 30, 40, 45, 50 and 60) for tools with Morse taper shanks (Nos. 1 to 6). All these sleeves allow driving of tools having Morse taper shanks which have a tenon at the small end of the shank; some sleeves allow driving of tools having Morse taper shanks which have an axially tapped hole in the shank: - with the use of an incorporated screw for sleeves 30 × 1 ? 40 × 1 ? 40 × 2 ? 45 × 1 ? 45 × 2 ? 45 × 3 ? 50 ×...view more

ISO 10897:2016 specifies the dimensions, materials and manufacturing requirements, and designation of collets for tools with cylindrical shanks and their corresponding holders and nuts. For non-standardized clamping devices, such as clamping devices specified in drawings, these holders can be agreed upon between customer and supplier. Form A applies where a clamping range of H10 is sufficient. Form B can be used for any application without lateral cutting load. Annex A specifies the values for A...view more

ISO 10889-3:2016 specifies dimensions, designations, and complementary technical delivery conditions for tool holders with a rectangular radial seat of types B1 to B8 with cylindrical shank in accordance with ISO 10889‑1. ISO 10889 is applicable to tool holders with cylindrical shank for machine tools with non-rotating tools, preferably for turning machines. For non-standardized tool holders with a rectangular radial seat such as the tool holders shown in the figures, it is advisable to apply th...view more

ISO 10889-5:2016 specifies dimensions, designations and complementary technical delivery conditions for tool holders with more than one rectangular seat of types D1 and D2 with cylindrical shank in accordance with ISO 10889‑1. ISO 10889-5:2016 is applicable to tool holders with cylindrical shank for machine tools with non-rotating tools, preferably for turning machines. For non-standardized tool holders with more than one rectangular seat, such as tool holders as shown in Figures 1 to 3, it is a...view more

ISO 10889-6:2016 specifies dimensions, designations, and complementary technical delivery conditions for tool holders with cylindrical seat of types E1 to E4 with a mounting system cylindrical shank in accordance with ISO 10889‑1. ISO 10889 is applicable to tool holders with cylindrical shank for machine tools with non-rotating tools, preferably for turning machines. For non-standardized tool holders, such as tool holders with a cylindrical seat as shown in Figures 1 to 4, it is advisable to app...view more

ISO 10889-7:2016 specifies dimensions, designations, and complementary technical delivery conditions for tool holders with taper seat of type F and with a cylindrical shank mounting system in accordance with ISO 10889‑1. ISO 10889 is applicable to tool holders with cylindrical shank for machine tools with non-rotating tools, preferably for turning machines. For non-standardized tool holders with taper seat such as the tool holders shown in Figure 1, it is advisable to apply the corresponding spe...view more

ISO 10889-4:2016 specifies dimensions, designations and complementary technical delivery conditions for tool holders with a rectangular axial seat of types C1 to C4 with cylindrical shank in accordance with ISO 10889‑1. ISO 10889-4:2016 is applicable to tool holders with cylindrical shank for machine tools with non-rotating tools, preferably for turning machines. For non-standardized tool holders with rectangular axial seat, such as the tool holders shown in Figures 1 to 4, it is advisable to ap...view more

ISO 10889-2:2016 specifies dimensions, designations and complementary technical delivery conditions for tool holders of type A with cylindrical shank in accordance with ISO 10889‑1 for tool holders of special designs. ISO 10889 is applicable to tool holders with cylindrical shank for machine tools with non-rotating tools, preferably for turning machines.

ISO 7388-3:2016 specifies the dimensions of retention knobs of forms AD, AF, UD, UF, JD and JF for tool shanks with a 7/24 taper for automatic tool changers used on machines having an automatic gripping system for feeding tools from the magazine to the spindle and vice-versa. These tools are designed with the most important dimensions for use in spindle noses according to ISO 9270 (all parts).

ISO 12164-3:2014 specifies dimensions for hollow taper shanks with flange contact surface (HSK) to be applied to machine tools (e.g. turning machines, turning-mill machines). A range of shank sizes is specified. Specified is the shank of type T. It incorporates a grooved flange to enable automatic tool exchange. The tools can also be exchanged manually via a hole in the shank taper. The torque is transmitted at the tail end of the shank through keys as well as friction.

ISO 12164-4:2014 specifies dimensions for receivers with taper and flange contact surfaces for hollow taper shanks in accordance with ISO 12164-3 to be applied to machine tools (e.g. turning machines, turning-mill machines). A range of sizes is specified. ISO 12164-4:2014 specifies the receiver of type T. It is for automatic tool exchange and manual clamping, which is achieved via holes in both the receiver and the tool shank. The torque is transmitted via the tail end of the shank through keys ...view more

ISO 26623-2:2014 specifies dimensions for polygonal taper interfaces with flange contact surface, polygon-receivers for automatic and manual tool exchange to be applied on machine tools (e.g. turning machines, drilling machines, milling machines, and turn/milling centres as well as grinding machines). A range of receiver sizes is specified. The torque is transmitted by form lock (polygon).

ISO 26623-1:2014 specifies dimensions for polygonal taper interfaces with flange contact surface: polygon-shanks for automatic and manual tool exchange to be applied on machine tools (e. g. turning machines, drilling machines, milling machines, and turn/milling centres, as well as grinding machines). A range of shank sizes is specified.

ISO 10649-1:2013 specifies the dimensions of tool interface for cutter arbors with parallel key and tenon drive.

ISO 10649-2:2013 specifies the dimensions of cutter arbors with parallel key and tenon drive with hollow taper interface (HSK) with flange contact surface.

ISO 10649-3:2013 specifies the dimensions of cutter arbors with parallel key and tenon drive with 7/24 tapers for automatic tool changer.