25.220.10 - Surface preparation

This document specifies a method of assessing of whether a non-metallic blast-cleaning abrasive has a
minimum hardness of 6 on Mohs' scale.
This document is a part of the ISO 11127 series dealing with the sampling and testing of non-metallic
abrasives for blast-cleaning.
The types of non-metallic abrasive and requirements on each are contained in the ISO 11126 series.
The ISO 11126 and ISO 11127 series have been drafted as a coherent set of International Standards on
non-metallic blast-cle...view more

This document specifies a series of preparation grades for steel surfaces after removal/partial removal of water-soluble contaminants, rust, previous paint coatings and other foreign matter by high-pressure water jetting. The various grades are defined by written descriptions together with photographs that are representative examples within the tolerances for each grade as described in words.
This document specifies both initial surface conditions and after-cleaning flash rust grades, also defi...view more

This document specifies a series of preparation grades for steel surfaces after removal/partial removal of water-soluble contaminants, rust, previous paint coatings and other foreign matter by high-pressure water jetting. The various grades are defined by written descriptions together with photographs that are representative examples within the tolerances for each grade as described in words. This document specifies both initial surface conditions and after-cleaning flash rust grades, also defin...view more

This document specifies a field method for the determination of water-soluble chlorides in non-metallic blast-cleaning abrasives. This field method is provided as a kit with all components and premeasured extraction solution. This document differs from ISO 11127-7 in that equal volumes of the sample of abrasive and extraction solution are used for the determination of chloride level in the abrasive. In comparison, ISO 11127-7 uses a weight to volume ratio of abrasive to solvent (deionized water)...view more

This document specifies a method of assessing of whether a non-metallic blast-cleaning abrasive has a minimum hardness of 6 on Mohs' scale. This document is a part of the ISO 11127 series dealing with the sampling and testing of non-metallic abrasives for blast-cleaning. The types of non-metallic abrasive and requirements on each are contained in the ISO 11126 series. The ISO 11126 and ISO 11127 series have been drafted as a coherent set of International Standards on non-metallic blast-cleaning ...view more

This document specifies a method for the sampling of non-metallic blast-cleaning abrasives from consignments and for the subdivision of the sample into quantities suitable for undertaking the appropriate test methods specified in ISO 11127-2, ISO 11127-3, ISO 11127-4, ISO 11127-5, ISO 11127-6 and ISO 11127-7. This document is a part of the ISO 11127 series dealing with the sampling and testing of non-metallic abrasives for blast-cleaning. The types of non-metallic abrasive and requirements for e...view more

This document specifies a method for the determination of the level of free moisture present in non-metallic blast-cleaning abrasives. It is determined by measuring the mass lost on heating. This document is one of a number of parts of ISO 11127 dealing with the sampling and testing of non-metallic abrasives for blast-cleaning. The types of non-metallic abrasive and requirements on each are contained in the ISO 11126 series. The ISO 11126 series and the ISO 11127 series have been drafted as a co...view more

This document specifies a method for the determination of the particle size distribution of non-metallic blast-cleaning abrasives by sieving. This document is a part of the ISO 11127 series dealing with the sampling and testing of non-metallic abrasives for blast-cleaning. The types of non-metallic abrasive and requirements for each are contained in the ISO 11126 series. The ISO 11126 and ISO 11127 series have been drafted as a coherent set of International Standards on non-metallic blast-cleani...view more

This document specifies a method for the determination of the apparent density of non-metallic blast-cleaning abrasives. This document is a part of the ISO 11127 series dealing with the sampling and testing of non-metallic abrasives for blast-cleaning. The types of non-metallic abrasive and requirements for each are contained in the ISO 11126 series. The ISO 11126 and ISO 11127 series have been drafted as a coherent set of International Standards on non-metallic blast-cleaning abrasives. Informa...view more

This document specifies a field method for the assessment of the surface density of various water-soluble
salts on steel surfaces, before and/or after surface preparation, by conductometric determination. The
individual surface densities of the salt composition like chlorides, sulphates, sodium, etc, cannot be
determined by this method.
This method assesses only contaminants that forms an electrolyte (ions) when in contact with water.
These represent the greater part of the contaminants.

This document specifies a method of extracting, for analysis, acid soluble contaminants from a surface by use of flexible cells in the form of adhesive patches or sleeves which can be attached to any surface, regardless of its shape (flat or curved) and its orientation (facing in any direction, including downwards). The described method is suitable for use in the field to determine the presence of acid soluble contaminants before painting or a similar treatment. This document does not cover the ...view more

This document specifies a field method for the assessment of the surface density of various water-soluble salts on steel surfaces, before and/or after surface preparation, by conductometric determination. The individual surface densities of the salt composition like chlorides, sulphates, sodium, etc, cannot be determined by this method. This method assesses only contaminants that forms an electrolyte (ions) when in contact with water. These represent the greater part of the contaminants.

This document specifies a method of extracting, for analysis, water soluble contaminants from a surface by use of flexible cells in the form of adhesive patches or sleeves which can be attached to any surface, regardless of its shape (flat or curved) and its orientation (facing in any direction, including downwards).
The method described is suitable for use in the field to determine the presence of water soluble contaminants before painting or a similar treatment.
This document does not cover ...view more

This document specifies a method of extracting, for analysis, water soluble contaminants from a surface by use of flexible cells in the form of adhesive patches or sleeves which can be attached to any surface, regardless of its shape (flat or curved) and its orientation (facing in any direction, including downwards). The method described is suitable for use in the field to determine the presence of water soluble contaminants before painting or a similar treatment. This document does not cover th...view more

This document describes the general principles for the selection of methods for the preparation of steel surfaces before application of paints and related products. It also contains information on features that are taken into account when selecting and specifying certain surface preparation methods and preparation grades.

This document specifies abrasive blast-cleaning methods for the preparation of steel surfaces before coating with paints and related products. It provides information on the effectiveness of the individual methods and their fields of application. It describes the equipment to use and the procedure to follow.

This document describes the general principles for the selection of methods for the preparation of steel surfaces before application of paints and related products. It also contains information on features that are taken into account when selecting and specifying certain surface preparation methods and preparation grades.

This document specifies abrasive blast-cleaning methods for the preparation of steel surfaces before coating with paints and related products. It provides information on the effectiveness of the individual methods and their fields of application. It describes the equipment to use and the procedure to follow.
NOTE These methods are essentially intended for hot-rolled steel to remove mill scale, rust, etc. but could also be used for cold-rolled steel of sufficient thickness to withstand the defor...view more

This document describes the general principles for the selection of methods for the preparation of steel surfaces before application of paints and related products. It also contains information on features that are taken into account when selecting and specifying certain surface preparation methods and preparation grades.

This document specifies abrasive blast-cleaning methods for the preparation of steel surfaces before coating with paints and related products. It provides information on the effectiveness of the individual methods and their fields of application. It describes the equipment to use and the procedure to follow. NOTE These methods are essentially intended for hot-rolled steel to remove mill scale, rust, etc. but could also be used for cold-rolled steel of sufficient thickness to withstand the deform...view more