59.120.30 - Looms. Weaving machines

This document covers the different types of weaving and knitting machines defined in ISO 5247 (all parts)[2] and ISO 7839[3], respectively. It is applicable to: full-width weaving machines with weft insertion by: shuttles; rigid, telescopic or flexible rapiers; projectiles; hydraulic (waterjet) or by pneumatic (airjet) nozzle; narrow fabric weaving machines with weft insertion by shuttles or needles; jacquard machines; knitting machinery including: circular knitting; flat bed knitting; warp knit...view more

2014-09-30: correction - Draft only available 2014-08-27 (see ISO notification in dataservice on 2014-09-30).
2014-06-24: Draft for // ENQ received at ISO/CS ( see ISO notification in dataservice on 2014-06-24).

2014-09-30: correction - Draft only available 2014-08-27 (see ISO notification in dataservice on 2014-09-30).
2014-06-24: Draft for // ENQ received at ISO/CS ( see ISO notification in dataservice on 2014-06-24).

2014-09-30: correction - Draft only available 2014-08-27 (see ISO notification in dataservice on 2014-09-30).

2014-09-30: correction - Draft only available 2014-08-27 (see ISO notification in dataservice on 2014-09-30).

This Part 6 of the standard is a complement to Part 1 and specifies, together with it, the mounting, operating and measuring conditions required for the measurement, declaration and verification of noise emitted by different types of spinning preparatory and spinning machines. It is applicable to engineering methods (grade 2) and survey methods (grade 3) defined in the standards referred to. It concerns machines for: weaving (as listed in ISO 5247), etc.

This Part 5 of the standard is a complement to Part 1 and specifies, together with it, the mounting, operating and measuring conditions required for the measurement, declaration and verification of noise emitted by different types of spinning preparatory and spinning machines. It is applicable to engineering methods (grade 2) and survey methods (grade 3) defined in the standards referred to. It concerns machines as listed in ISO 2544 for: - warping, - beaming, - sizing.

2013-08-20 EMA: Draft for // vote received in ISO/CS (see notification of 2013-08-20 in dataservice).
2012-11-08 GVN: Draft for // ENQ available at ISO/CS (see notification in dataservice on 2012-11-07)

2013-08-21 EMA: Draft for // vote received in ISO/CS (see notification of 2013-08-20 in dataservice).
2012-11-08 GVN: Draft for // ENQ available at ISO/CS (see notification in dataservice on 2012-11-07)

ISO 13435:2011 specifies dimensions and tolerances for bars for drop wires for electrical warp stop motions with continuous contact rail (form E1) or inner split contact rail (form E2).

This Part 6 of the standard is a complement to Part 1 and specifies, together with it, the mounting, operating and measuring conditions required for the measurement, declaration and verification of noise emitted by different types of spinning preparatory and spinning machines. It is applicable to engineering methods (grade 2) and survey methods (grade 3) defined in the standards referred to. It concerns machines for: weaving (as listed in ISO 5247), etc.