EN ISO 11111-5:2005/A1:2009

• Status: Published
• Publication Date: 21-Jul-2009
• Withdrawal Date: 30-Jan-2010
• ICS: 59.120.30 - Looms. Weaving machines
• ICS: 59.120.40 - Knitting machines
• Technical Committee: CEN/TC 214 - Textile machinery and allied machinery
• Drafting Committee: CEN/TC 214/WG 1 - Safety requirements for textile machinery
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 22-Jul-2009
• Completion Date: 22-Jul-2009
• Directive: Harmonized Standard2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
  OJ Ref: C, C 309 OJ Date: 18-Dec-2009
• Directive:

  ---

  Not Harmonized98/37/EC - Machinery
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Mandate: M/BC/CEN/88/13 - Standardization request to CEN/CENELEC relating to machinery
• Ref Project: SIST EN ISO 11111-5:2005/A1:2010 - Textile machinery - Safety requirements - Part 5: Preparatory machinery to weaving and knitting - Amendment 1 (ISO 11111-5:2005/Amd 1:2009)

• Referred By: EN ISO 18278-2:2004 - Resistance welding - Weldability - Part 2: Alternative procedures for the assessment of sheet steels for spot welding (ISO 18278-2:2004)
• Effective Date: 28-Jan-2026
• Consolidated By: ISO 11111-5:2005/Amd 1:2009 - Textile machinery — Safety requirements — Part 5: Preparatory machinery to weaving and knitting — Amendment 1
• Effective Date: 12-Feb-2026
• Amends: EN ISO 11111-5:2005 - Textile machinery - Safety requirements - Part 5: Preparatory machinery to weaving and knitting (ISO 11111-5:2005)
• Effective Date: 22-Dec-2008

Overview

EN ISO 11111-5:2005/A1:2009 is an amendment to Part 5 of ISO 11111, the series on textile machinery - safety requirements. Part 5 covers preparatory machinery to weaving and knitting (warping, beaming, sizing, storage and related equipment). Amendment A1 (2009) updates normative references, refines lists of significant hazards and verification/information requirements, and adds/clarifies items in the scope of safety measures for preparatory textile machines. The document is published by CEN in parallel with ISO and supports conformity with EU machinery directives (notably 2006/42/EC).

Key topics and requirements

• Normative reference updates: Replaces earlier editions with newer standards such as:
  • ISO 11111-1:2009 (Common requirements)
  • ISO 14121-1 (Risk assessment - Part 1: Principles)
  • ISO/DIS 13857:2006 (safety distances to prevent hazard zones being reached)
  • IEC 60204-1:2005 (electrical equipment of machines)
• List of significant hazards: References to the updated common requirements (ISO 11111-1:2009) for hazard identification and risk assessment.
• Machine-specific adjustments:
  • Changes to Tables listing hazards and safeguards for warping, beaming, sizing lines, cylinder dryers and storage equipment.
  • Deletion of some entries (e.g., specific door/lid locking entries) and addition of new items such as work platforms, beamer/burner for direct heat treatment, devices for steam heating, automatic machines and complex installations.
• Information and instruction requirements: Clarifies user information obligations - e.g., instruction handbook must warn that beams used shall be precisely balanced.
• Verification of safety measures: Cross-references updated Part 1 for verification procedures and testing.

Practical applications and users

Who uses this standard:

• Machine manufacturers and designers of preparatory textile equipment (warping, beaming, sizing, storage)
• Safety engineers and risk assessors responsible for machine compliance
• Compliance officers and certification bodies assessing conformity to EU machinery directives
• Maintenance staff, machine installers and end-users who need to follow instruction and warning provisions

How it is used:

• To design and evaluate guarding, safety distances and electrical safety in preparatory textile machinery
• To prepare technical files, instructions and warnings required for CE marking under Directive 2006/42/EC
• To perform risk assessments and verification tests in accordance with ISO 11111-1:2009 and ISO 14121-1

Related standards and directives

• ISO 11111-1:2009 - Textile machinery - Part 1: Common requirements
• ISO 14121-1 - Safety of machinery - Risk assessment - Part 1: Principles
• ISO/DIS 13857:2006 (replacing ISO 13852) - Safety distances to prevent hazard reach
• IEC 60204-1:2005 - Electrical equipment of machines
• EU Directive 2006/42/EC - Machinery Directive (essential requirements)

Keywords: EN ISO 11111-5:2005/A1:2009, textile machinery safety, preparatory machinery, warping beaming sizing, machine safety standards, ISO 11111-5 amendment.

SLOVENSKI STANDARD
01-marec-2010
Tekstilni stroji - Varnostne zahteve - 5. del: Stroji za pripravo za tkanje in pletenje -
Dopolnilo 1 (ISO 11111-5:2005/Amd 1:2009)
Textile machinery - Safety requirements - Part 5: Preparatory machinery to weaving and
knitting - Amendment 1 (ISO 11111-5:2005/Amd 1:2009)
Textilmaschinen - Sicherheitsanforderungen - Teil 5: Vorbereitungsmaschinen für die
Weberei und Wirkerei - Änderung 1 (ISO 11111-5:2005/Amd 1:2009)
Matériel pour l'industrie textile - Exigences de sécurité - Partie 5: Machines de
préparation au tissage et au tricotage - Amendement 1 (ISO 11111-5:2005/Amd 1:2009)
Ta slovenski standard je istoveten z: EN ISO 11111-5:2005/A1:2009
ICS:
59.120.30 Statve. Tkalni stroji Looms. Weaving machines
59.120.40 Pletilni stroji Knitting machines
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 11111-5:2005/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2009
ICS 59.120.30; 59.120.40
English Version
Textile machinery - Safety requirements - Part 5: Preparatory
machinery to weaving and knitting - Amendment 1 (ISO 11111-
5:2005/Amd 1:2009)
Matériel pour l'industrie textile - Exigences de sécurité - Textilmaschinen - Sicherheitsanforderungen - Teil 5:
Partie 5: Machines de préparation au tissage et au Vorbereitungsmaschinen für die Weberei und Wirkerei -
tricotage - Amendement 1 (ISO 11111-5:2005/Amd 1:2009) Änderung 1 (ISO 11111-5:2005/Amd 1:2009)
This amendment A1 modifies the European Standard EN ISO 11111-5:2005; it was approved by CEN on 3 July 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11111-5:2005/A1:2009: E
worldwide for CEN national Members.

Contents Page
Foreword .3
Annex ZA (informative)  Relationship between this International Standard and the Essential
Requirements of EU Directive 98/37/EC .4
Annex ZB (informative)  Relationship between this International Standard and the Essential
Requirements of EU Directive 2006/42/EC .5

Foreword
This document (EN ISO 11111-5:2005/A1:2009) has been prepared by Technical Committee ISO/TC 72
"Textile machinery and accessories" in collaboration with Technical Committee CEN/TC 214 “Textile
machinery and accessories” the secretariat of which is held by SNV.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2010, and conflicting national standards shall be withdrawn at
the latest by January 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EC Directives.
For relationship with EC Directives, see informative Annex ZA and ZB, which are integral parts of this
document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 11111-5:2005/Amd 1:2009 has been approved by CEN as a EN ISO 11111-5:2005/A1:2009
without any modification.
Annex ZA
(informative)
Relationship between this International Standard and the Essential
Requirements of EU Directive 98/37/EC
This International Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide a means of conforming to Essential Requirements of the
New Approach Directive 98/37/EC amended by Directive 98/79/EC.
Once this standard is cited in the Official Journal of the European Communities under that Directive and has
been implemented as a national standard in at least one Member State, compliance with the normative
clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity
with the relevant Essential Requirements of that Directive and associated EFTA regulations.
WARNING: Other requirements and other EU Directives may be applicable to the product(s) falling within the
scope of this International standard.

Annex ZB
(informative)
Relationship between this International Standard and the Essential
Requirements of EU Directive 2006/42/EC
This International Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide a means of conforming to Essential Requirements of the
New Approach Directive 2006/42/EC on machinery.
Once this standard is cited in the Official Journal of the European Communities under that Directive and has
been implemented as a national standard in at least one Member State, compliance with the normative
...