SIST EN ISO 9902-6:2002/A2:2014
(Amendment)Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery (ISO 9902-6:2001/Amd 2:2014)
Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery (ISO 9902-6:2001/Amd 2:2014)
This Part 6 of the standard is a complement to Part 1 and specifies, together with it, the mounting, operating and measuring conditions required for the measurement, declaration and verification of noise emitted by different types of spinning preparatory and spinning machines. It is applicable to engineering methods (grade 2) and survey methods (grade 3) defined in the standards referred to. It concerns machines for: weaving (as listed in ISO 5247), etc.
Textilmaschinen - Geräuschmessverfahren - Teil 6: Maschinen zur Herstellung textiler Flächengebilde (ISO 9902-6:2001/Amd 2:2014)
Matériel pour l'industrie textile - Code d'essai acoustique - Partie 6: Machines de production des étoffes (ISO 9902-6:2001/Amd 2:2014)
Tekstilni stroji - Preskusni postopki za merjenje hrupa - 6. del: Stroji za izdelavo tkanin - Dopolnilo A2 (ISO 9902-6:2001/Amd 2:2014)
6. del standarda dopolnjuje 1. del in skupaj z njim določa zahteve za priključitev, delovanje in merjenje, potrebne za merjenje, deklariranje in preverjanje hrupa, ki ga oddajajo različne vrste strojev za pripravo preje in predilnih strojev. Uporablja se za inženirske metode (razred 2) in raziskovalne metode (razred 3), opredeljene v navedenih standardih. Obravnava stroje za tkanje (kot je navedeno v standardu ISO 5247) itd.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 9902-6:2002/A2:2014
01-september-2014
Tekstilni stroji - Preskusni postopki za merjenje hrupa - 6. del: Stroji za izdelavo
tkanin - Dopolnilo A2 (ISO 9902-6:2001/Amd 2:2014)
Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery (ISO 9902-
6:2001/Amd 2:2014)
Textilmaschinen - Geräuschmessverfahren - Teil 6: Maschinen zur Herstellung textiler
Flächengebilde (ISO 9902-6:2001/Amd 2:2014)
Matériel pour l'industrie textile - Code d'essai acoustique - Partie 6: Machines de
production des étoffes (ISO 9902-6:2001/Amd 2:2014)
Ta slovenski standard je istoveten z: EN ISO 9902-6:2001/A2:2014
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
59.120.30 Statve. Tkalni stroji Looms. Weaving machines
SIST EN ISO 9902-6:2002/A2:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 9902-6:2002/A2:2014
---------------------- Page: 2 ----------------------
SIST EN ISO 9902-6:2002/A2:2014
EUROPEAN STANDARD
EN ISO 9902-6:2001/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2014
ICS 17.140.20; 59.120.30
English Version
Textile machinery - Noise test code - Part 6: Fabric
manufacturing machinery (ISO 9902-6:2001/Amd 2:2014)
Matériel pour l'industrie textile - Code d'essai acoustique - Textilmaschinen - Geräuschmessverfahren - Teil 6:
Partie 6: Machines de production des étoffes (ISO 9902- Maschinen zur Herstellung textiler Flächengebilde (ISO
6:2001/Amd 2:2014) 9902-6:2001/Amd 2:2014)
This amendment A2 modifies the European Standard EN ISO 9902-6:2001; it was approved by CEN on 7 May 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9902-6:2001/A2:2014 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 9902-6:2002/A2:2014
EN ISO 9902-6:2001/A2:2014 (E)
Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC .4
2
---------------------- Page: 4 ----------------------
SIST EN ISO 9902-6:2002/A2:2014
EN ISO 9902-6:2001/A2:2014 (E)
Foreword
This document (EN ISO 9902-6:2001/A2:2014) has been prepared by Technical Committee ISO/TC 72
"Textile machinery and accessories" in collaboration with Technical Committee CEN/TC 214 “Textile
machinery and accessories” the secretariat of which is held by SNV.
This Amendment to the European Standard EN ISO 9902-6:2001 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by December 2014, and
conflicting national standards shall be withdrawn at the latest by December 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, M
...
SLOVENSKI STANDARD
SIST EN ISO 9902-6:2002/oprA2:2013
01-april-2013
Tekstilni stroji - Postopki za merjenje hrupa - 6. del: Tkalni stroji - Dopolnilo A2
(ISO 9902-6:2001/DAM 2:2013)
Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery (ISO 9902-
6:2001/DAM 2:2013)
Textilmaschinen - Geräuschmessverfahren - Teil 6: Maschinen zur Herstellung textiler
Flächengebilde (ISO 9902-6:2001/DAM 2:2013)
Matériel pour l'industrie textile - Code d'essai acoustique - Partie 6: Machines de
production des étoffes (ISO 9902-6:2001/DAM 2:2013)
Ta slovenski standard je istoveten z: EN ISO 9902-6:2001/prA2
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
59.120.30 Statve. Tkalni stroji Looms. Weaving machines
SIST EN ISO 9902-6:2002/oprA2:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 9902-6:2002/oprA2:2013
---------------------- Page: 2 ----------------------
SIST EN ISO 9902-6:2002/oprA2:2013
EUROPEAN STANDARD
DRAFT
EN ISO 9902-6:2001
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA2
January 2013
ICS 17.140.20; 59.120.01
English Version
Textile machinery - Noise test code - Part 6: Fabric
manufacturing machinery (ISO 9902-6:2001/DAM 2:2013)
Matériel pour l'industrie textile - Code d'essai acoustique -
Partie 6: Machines de production des étoffes (ISO 9902-
6:2001/DAM 2:2013)
This draft amendment is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee CEN/TC 214.
This draft amendment A2, if approved, will modify the European Standard EN ISO 9902-6:2001. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9902-6:2001/prA2:2013: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 9902-6:2002/oprA2:2013
EN ISO 9902-6:2001/prA2:2013 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 9902-6:2002/oprA2:2013
EN ISO 9902-6:2001/prA2:2013 (E)
Foreword
This document (EN ISO 9902-6:2001/prA2:2013) has been prepared by Technical Committee ISO/TC 72
"Textile machinery and machinery for dry-cleaning and industrial laundering" in collaboration with Technical
Committee CEN/TC 214 “Textile machinery and accessories” the secretariat of which is held by SNV.
This document is currently submitted to the parallel Enquiry.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
Endorsement notice
The text of ISO 9902-6:2001/DAM 2:2013 has been approved by CEN as a EN ISO 9902-6:2001/prA2:2013
without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 9902-6:2002/oprA2:2013
---------------------- Page: 6 ----------------------
SIST EN ISO 9902-6:2002/oprA2:2013
DRAFT AMENDMENT ISO 9902-6:2001/DAM 2
ISO/TC 72/SC 8 Secretariat: DIN
Voting begins on Voting terminates on
2013-01-10 2013-06-10
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Textile machinery — Noise test code —
Part 6:
Fabric manufacturing machinery
AMENDMENT 2
Matériel pour l'industrie textile — Code d'essai acoustique —
Partie 6: Machines de production des étoffes
AMENDEMENT 2
ICS 17.140.20; 59.120.01
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for Standardization (ISO), and
processed under the ISO-lead mode of collaboration as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member bodies for a parallel
five-month enquiry.
Should this draft be accepted, a final draft, esta
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.