71.100 - Products of the chemical industry

This document specifies certain characteristics of the essential oil of matricaria [Matricaria chamomilla L. syn. Chamomilla recutita (L.) Rauschert] in order to facilitate assessment of its quality.

This document specifies a procedure for evaluating the water resistance retention percentage, by comparing the sun protection factor (SPF) before water immersion (hereafter referred to as the "static" SPF) and after a fixed period of water immersion (hereafter referred to as the "wet" SPF).

This European Standard specifies a test method and the minimum requirements for bactericidal activity of chemical disinfectant products intended to be used for treatment in aqueous systems against Legionella pneumophila that form a homogeneous, physically stable preparation when diluted with buffered ferrous hard water or hard water. Whenever Legionella pneumophila poses a risk to human health, this method is suitable for water used in cooling towers and water for general purposes, like spas, po...view more

This document specifies a method for the determination of static electricity elimination (antistatic) performance. This document is applicable to fabric conditioners and antistatic agents. NOTE The differences between this document and some International Standards related to static electricity on textiles are listed in Annex B.

This document specifies requirements and test methods for total digestible fluoride content and a
minimum soluble fluoride release potential in dental varnishes containing fluoride, intended for use
in the oral cavity directly on the outer surfaces of teeth and fillings. It also specifies packaging and
labelling requirements, including the instructions for use. This document covers fluoride varnishes to
be applied by dental health care workers.

ISO 13338:2017 provides:
- for pure gases and some liquids, a complete list indicating their corrosiveness;
- for gas mixtures, a calculation method, in the absence of experimental data, relating to the corrosiveness of each of their components;
in order to determine the corrosiveness of gases and gas mixtures on tissue so that a suitable outlet connection can be assigned to each of them.

ISO 10298:2018 lists the best available acute-toxicity data of gases taken from a search of the current literature to allow the classification of gases and gas mixtures for toxicity by inhalation.

This document specifies requirements and test methods for the physical properties of powered
toothbrushes in order to promote the safety of these products for their intended use.
There are different technologies of powered toothbrushes. Common features of those powered
toothbrushes to which this document applies are:
— a battery;
— a motor;
— a mechanical or magnetic drive system;
— a moving brush head with tufted filaments.
Powered toothbrushes can have a moving brush head with differen...view more

This document specifies a method for the determination of the resistance to physical abrasion of a cathode sample.

This document provides guidance on the operation of fireworks displays by professional teams of people with specialized knowledge. It is not applicable to the use of theatrical pyrotechnic articles on stage, in filming locations, or any other locations. It is not applicable to displays that involve only fireworks of categories 1, 2 and 3.

This document specifies a procedure for evaluating the water resistance retention percentage, by comparing the sun protection factor (SPF) before water immersion (hereafter referred to as the "static" SPF) and after a fixed period of water immersion (hereafter referred to as the "wet" SPF).

This document gives guidance for the enumeration and/or detection of microorganisms present in a cosmetic product that is impregnated or coated onto a substrate (i.e. wipes and masks) where sampling and microbiological influence of the manufactured product presents particular challenges in terms of microbiological sampling and testing.
The principle of this document can also be applied to test similar products (e.g. cushion, impregnated sponge, etc.) or applicators (e.g. brush, puff, sponge, et...view more

This document specifies an evaporative ageing procedure, applicable to test specimens of wood which have been previously treated with a wood preservative, in order to evaluate any loss of effectiveness when these test specimens are subsequently subjected to biological tests.

This document specifies a method for the leaching of test specimens of wood which are used in the testing of the biological efficacy of wood preservatives.
This standard is applicable to:
a)   the pre-conditioning of test specimens prior to their being subjected to a biological test ; or
b)   assessment of loss of effectiveness by comparing the performance in a biological test of treated test specimens subjected to this procedure with others that have not undergone any leaching procedure.
NOTE   T...view more

This document specifies certain characteristics of the essential oil of Corymbia citriodora (Hook.) K.D. Hill and L.A.S. Johnson (syn. Eucalyptus citriodora Hook.) with a view to facilitating the assessment of its quality.

This International Standard specifies the requirements for design, manufacture and testing of cylinders, tubes, and other pressure vessels of steel, stainless steel, aluminium alloys or of non-metallic construction material intended for the stationary storage of gaseous hydrogen of up to a maximum water capacity of 10 000 l and a maximum allowable working pressure not exceeding 110 MPa, of seamless metallic construction (Type 1) or of composite construction (Types 2, 3 and 4) without any non-sea...view more

This document specifies the test method for determination of the lead content in pyrotechnic compositions of fireworks by flame atomic absorption spectrophotometry, with a minimum detection limit of 10 mg/kg. It is generally recommended to perform a simple preliminary qualitative test to check whether a quantitative analysis is required.

This document specifies a method for determining the performance of a preservative, applied to the upper surface of the mortar test specimens, in preventing the growth of dry rot through the treated mortar when exposed to the test fungus.
This method is only applicable to masonry fungicides applied as a true solution of the preservative in water or dilute oil in water emulsion. It is not applicable to rods, pastes and other similar preservative types. This method is applicable to preservatives ...view more

The method described herein is designed to determine the disinfectant activity of processes used in hospital, medical, pharmaceutical and cosmetics, veterinary, industrial and food processing areas.
The product trialled is designed to be diffused as gaseous molecules or solid or liquid-form dispersants.
NOTE Concerning automatic disinfectant processes:
the limits to use, especially in terms of ability to diffuse throughout the room (min and max effective volumes), shall be specified and stated...view more

This document specifies a method for the determination of the eradicant action of a surface application of a fast and a slow acting wood preservative product or a deferred acting wood preservative product on timber infested with larvae of Hylotrupes bajulus (Linnaeus).
This method is applicable to:
organic formulations, as supplied or as prepared in the laboratory by dilution of concentrates,
or
organic water dispersible formulations, as supplied or as prepared in the laboratory by dilution...view more