SIST EN ISO 13338:2020
(Main)Gas cylinders - Gases and gas mixtures - Determination of tissue corrosiveness for the selection of cylinder valve outlets (ISO 13338:2017)
Gas cylinders - Gases and gas mixtures - Determination of tissue corrosiveness for the selection of cylinder valve outlets (ISO 13338:2017)
ISO 13338:2017 provides:
- for pure gases and some liquids, a complete list indicating their corrosiveness;
- for gas mixtures, a calculation method, in the absence of experimental data, relating to the corrosiveness of each of their components;
in order to determine the corrosiveness of gases and gas mixtures on tissue so that a suitable outlet connection can be assigned to each of them.
Gasflaschen - Gase und Gasgemische - Bestimmung der Gewebekorrosivität von Gasen oder Gasgemischen für die Auswahl von Ventilausgängen (ISO 13338:2017)
Dieses Dokument enthält
- für reine Gase und einige Flüssigkeiten eine vollständige Liste mit Angabe ihrer Ätzwirkung,
- für Gasgemische ein Berechnungsverfahren ohne experimentelle Daten, das sich auf die Ätzwirkung jeder ihrer Komponenten bezieht,
um die Ätzwirkung von Gasen und Gasgemischen auf Gewebe zu bestimmen, so dass jedem von ihnen ein geeigneter Ausgangsanschluss zugeordnet werden kann.
Bouteilles à gaz - Gaz et mélanges de gaz - Détermination de la corrosivité sur les tissus pour le choix des raccords de sortie de robinets (ISO 13338:2017)
Le présent document donne:
— pour les gaz purs et certains liquides, une liste complète indiquant leur corrosivité;
— pour les mélanges de gaz, une méthode de calcul, en l'absence de données expérimentales, tenant compte de la corrosivité de chacun de leurs composants;
dans le but de déterminer la corrosivité des gaz et mélanges de gaz sur les tissus et de permettre l'affectation d'un raccord de sortie approprié à chacun d'eux.
Plinske jeklenke - Plini in zmesi plinov - Določanje agresivnosti plinov in njihovih zmesi na tkiva za izbiro izhodnega priključka ventila na jeklenki (ISO 13338:2017)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 13338:2020
01-december-2020
Plinske jeklenke - Plini in zmesi plinov - Določanje agresivnosti plinov in njihovih
zmesi na tkiva za izbiro izhodnega priključka ventila na jeklenki (ISO 13338:2017)
Gas cylinders - Gases and gas mixtures - Determination of tissue corrosiveness for the
selection of cylinder valve outlets (ISO 13338:2017)
Gasflaschen - Gase und Gasgemische - Bestimmung der Gewebekorrosivität von Gasen
oder Gasgemischen für die Auswahl von Ventilausgängen (ISO 13338:2017)
Bouteilles à gaz - Gaz et mélanges de gaz - Détermination de la corrosivité sur les tissus
pour le choix des raccords de sortie de robinets (ISO 13338:2017)
Ta slovenski standard je istoveten z: EN ISO 13338:2020
ICS:
23.020.35 Plinske jeklenke Gas cylinders
71.100.20 Industrijski plini Gases for industrial
application
SIST EN ISO 13338:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 13338:2020
---------------------- Page: 2 ----------------------
SIST EN ISO 13338:2020
EN ISO 13338
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2020
EUROPÄISCHE NORM
ICS 71.100.20
English Version
Gas cylinders - Gases and gas mixtures - Determination of
tissue corrosiveness for the selection of cylinder valve
outlets (ISO 13338:2017)
Bouteilles à gaz - Gaz et mélanges de gaz - Gasflaschen - Gase und Gasgemische - Bestimmung der
Détermination de la corrosivité sur les tissus pour le Gewebekorrosivität von Gasen oder Gasgemischen für
choix des raccords de sortie de robinets (ISO die Auswahl von Ventilausgängen (ISO 13338:2017)
13338:2017)
This European Standard was approved by CEN on 28 September 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13338:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 13338:2020
EN ISO 13338:2020 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 13338:2020
EN ISO 13338:2020 (E)
European foreword
The text of ISO 13338:2017 has been prepared by Technical Committee ISO/TC 58 "Gas cylinders” of
the International Organization for Standardization (ISO) and has been taken over as EN ISO 13338:2020
by Technical Committee CEN/TC 23 “Transportable gas cylinders” the secretariat of which is held by
BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2021, and conflicting national standards shall be
withdrawn at the latest by April 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 13338:2017 has been approved by CEN as EN ISO 13338:2020 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 13338:2020
---------------------- Page: 6 ----------------------
SIST EN ISO 13338:2020
INTERNATIONAL ISO
STANDARD 13338
Second edition
2017-05
Gas cylinders — Gases and gas
mixtures — Determination of tissue
corrosiveness for the selection of
cylinder valve outlets
Bouteilles à gaz — Gaz et mélanges de gaz — Détermination de
la corrosivité sur les tissus pour le choix des raccords de sortie de
robinets
Reference number
ISO 13338:2017(E)
©
ISO 2017
---------------------- Page: 7 ----------------------
SIST EN ISO 13338:2020
ISO 13338:2017(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 13338:2020
ISO 13338:2017(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and symbols . 1
3.1 Terms and definitions . 1
3.2 Symbols . 2
4 Classification . 2
5 Categories of corrosiveness for pure gases . 2
6 Corrosiveness of gas mixtures — Calculation method . 7
Bibliography . 8
© ISO 2017 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 13338:2020
ISO 13338:2017(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO’s adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: w w w . i s o .org/ iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 58, Gas cylinders, Subcommittee SC 2,
Cylinder fittings.
This second edition cancels and replaces the first edition (ISO 13338:1995), which has been technically
revised with the following change:
— Clauses 3, 4 and 5 have been updated.
iv © ISO 2017 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 13338:2020
ISO 13338:2017(E)
Introduction
ISO 5145 specifies the dimensions of different valve outlets for different compatible gas groups. These
compatible gas groups are determined according to practical criteria defined in ISO 14456.
These criteria are based on certain physical, chemical, toxic and corrosive properties of the gases. In
particular, the tissue corrosiveness is considered in this document.
The aim of this document is to assign a classification category for each gas that takes into account the
corrosiveness for skin, eyes and the respiratory tract of the gas.
For gas mixtures containing corrosive components, a calculation method based on the additivity
method of the GHS is proposed.
However, for gas mixtures containing corrosive gas components, some valve outlets standards require
the use of the corrosive category regardless of the corrosive gas concentration.
© ISO 2017 – All rights reserved v
---------------------- Page: 11 ----------------------
SIST EN ISO 13338:2020
---------------------- Page: 12 ----------------------
SIST EN ISO 13338:2020
INTERNAT
...
SLOVENSKI STANDARD
oSIST prEN ISO 13338:2020
01-maj-2020
Plinske jeklenke - Plini in zmesi plinov - Določevanje korozivnosti tkiva za izbiro
izhodnega priključka ventila na jeklenki (ISO 13338:2017)
Gas cylinders - Gases and gas mixtures - Determination of tissue corrosiveness for the
selection of cylinder valve outlets (ISO 13338:2017)
Gasflaschen - Gase und Gasgemische - Bestimmung der Gewebekorrosivität von Gasen
oder Gasgemischen für die Auswahl von Ventilausgängen (ISO 13338:2017)
Bouteilles à gaz - Gaz et mélanges de gaz - Détermination de la corrosivité sur les tissus
pour le choix des raccords de sortie de robinets (ISO 13338:2017)
Ta slovenski standard je istoveten z: prEN ISO 13338
ICS:
23.020.35 Plinske jeklenke Gas cylinders
71.100.20 Industrijski plini Gases for industrial
application
oSIST prEN ISO 13338:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 13338:2020
---------------------- Page: 2 ----------------------
oSIST prEN ISO 13338:2020
INTERNATIONAL ISO
STANDARD 13338
Second edition
2017-05
Gas cylinders — Gases and gas
mixtures — Determination of tissue
corrosiveness for the selection of
cylinder valve outlets
Bouteilles à gaz — Gaz et mélanges de gaz — Détermination de
la corrosivité sur les tissus pour le choix des raccords de sortie de
robinets
Reference number
ISO 13338:2017(E)
©
ISO 2017
---------------------- Page: 3 ----------------------
oSIST prEN ISO 13338:2020
ISO 13338:2017(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 13338:2020
ISO 13338:2017(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and symbols . 1
3.1 Terms and definitions . 1
3.2 Symbols . 2
4 Classification . 2
5 Categories of corrosiveness for pure gases . 2
6 Corrosiveness of gas mixtures — Calculation method . 7
Bibliography . 8
© ISO 2017 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST prEN ISO 13338:2020
ISO 13338:2017(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO’s adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: w w w . i s o .org/ iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 58, Gas cylinders, Subcommittee SC 2,
Cylinder fittings.
This second edition cancels and replaces the first edition (ISO 13338:1995), which has been technically
revised with the following change:
— Clauses 3, 4 and 5 have been updated.
iv © ISO 2017 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 13338:2020
ISO 13338:2017(E)
Introduction
ISO 5145 specifies the dimensions of different valve outlets for different compatible gas groups. These
compatible gas groups are determined according to practical criteria defined in ISO 14456.
These criteria are based on certain physical, chemical, toxic and corrosive properties of the gases. In
particular, the tissue corrosiveness is considered in this document.
The aim of this document is to assign a classification category for each gas that takes into account the
corrosiveness for skin, eyes and the respiratory tract of the gas.
For gas mixtures containing corrosive components, a calculation method based on the additivity
method of the GHS is proposed.
However, for gas mixtures containing corrosive gas components, some valve outlets standards require
the use of the corrosive category regardless of the corrosive gas concentration.
© ISO 2017 – All rights reserved v
---------------------- Page: 7 ----------------------
oSIST prEN ISO 13338:2020
---------------------- Page: 8 ----------------------
oSIST prEN ISO 13338:2020
INTERNATIONAL STANDARD ISO 13338:2017(E)
Gas cylinders — Gases and gas mixtures —
Determination of tissue corrosiveness for the selection of
cylinder valve outlets
1 Scope
This document provides:
— for pure gases and some liquids, a complete list indicating their corrosiveness;
— for gas mixtures, a calculation method, in the absence of experimental data, relating to the
corrosiveness of each of their components;
in order to determine the corrosiveness of gases and gas mixtures on tissue so that a suitable outlet
connection can be assigned to each of them.
2 Normative references
There are no normative references in this document.
3 Terms, definitions and symbols
3.1 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at http:// www .electropedia .org/
— ISO Online browsing platform: available at http:// www .iso .org/ obp
3.1.1
tissue corrosiveness of gases or gas mixtures
ability of a gas to damage or destroy living tissues (eyes, skin and mucous membranes)
Note 1 to entry: It corresponds to GHS hazard category skin corrosion 1, 1A, 1B or 1C or GHS hazard category eye
damage 1.
3.1.2
irritant gas
gas which may cause a temporary reaction to the skin, eyes and mucous membranes
Note 1 to entry: It corresponds to GHS hazard category skin irritation 2 or GHS hazard category eye irritation 2.
Note 2 to entry: An irritant gas is regarded for the purposes of ISO 14456 as non-corrosive.
© ISO 2017 – All rights reserved 1
---------------------- Page: 9 ----------------------
oSIST prEN ISO 13338:2020
ISO 13338:2017(E)
3.2 Symbols
L limit
V volume
C indicates a corrosive component
i indicates an irritant component
nc indicates a non-corrosive, non-irritant component
4 Classification
ln accordance with the above, gases and gas mixtures are classified into the following categories:
— C: corrosive;
— i: irritant;
— nc: non-corrosi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.